arzum AR1114-B Hand Blender Set Instruction Manual

: June 15, 2024
: arzum

Table of Contents

arzum AR1114-B Hand Blender Set
IMPORTANT SAFEGUARDS
USING YOUR HAND BLENDER
Beating & Mixing With Beater Legs
Cutting With Bowl
Cutting and Mixing Suggestions
CLEANING AND CARE
Technical Specifications
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

arzum AR1114-B Hand Blender Set

TECHNOART MAXI NEO AR1114-B / AR1114-S HAND BLENDER

Main body (Motor)
Operation / Speed control button
Stainless steel blender shaft
Stainless steel blade
Attachment removal button
Processing bowl with a capacity of 1500 ml
Cutter more adept
Double-sided stainless steel blade
Beater more adept
Beaters
Measuring bowl with a capacity of 900 ml

arzum-AR1114-B-Hand-Blender-Set-FIG-1

We thank you for having selected the Arzum brand hand blender. This product as well is one of those offered to you to make life easier for you. To obtain the utmost output from your appliance, please read carefully this user’s manual and save it for further use.

IMPORTANT SAFEGUARDS

Make sure that the voltage indicated on the Arzum TECHNOART MAXI NEO Hand Blender corresponds with the main voltage in your home. Our company shall not be held liable for any failures owing to any discrepancy and such failures shall not be covered by the guarantee.
Your appliance is for household use only. Do not use the outdoors for commercial or industrial purposes. Otherwise, inconvenient uses shall not be covered by the guarantee.
Keep the appliance away from and out of the reach of children.
This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision.
Always disconnect the blender from the supply if it is left unattended and before assembling, disassembling or cleaning;
Do not allow children to use the blender without supervision.
To prevent harming your appliance do not use extension cords that supply insufficient current.
NEVER place your appliance over or near direct heat sources such as hot gas, electric burner, or heating oven.
Do not let the cord hang over the edge of a table or counter, or touch any other appliances.
Avoid touching any moving parts when in use. Do not keep your hands, hair, clothes, or any tools closer.
Before coming closer to the moving parts, release your hand from the operation button and wait for the motor exactly stop then unplug your appliance from the mains plug.
Do not use the appliance for breaking too stiff materials into pieces.
NEVER attach to your hand blender any accessories belonging to other appliances.
Avoid actions that may harm or damage the cord or plug of your device. Do not carry your apparatus by holding it from the cord. To unplug the heater, hold the plug and NEVER pull by the cord.
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner, such as by dropping down, etc. Do not attempt to repair it by yourself. Call immediately Arzum Authorized Service. Care for using the only original spare parts.

SPEED CONTROL BUTTON/SENSIBLE TOUCH TECHNOLOGY

One-button speed control: You can start the motor and control the speed of your appliance with a single touch of the speed button with an ergonomic grip.
Touch-sensitive speed setting provides more power as you apply pressure to the button.
If you press the speed button slowly, your device will work in the first level, and if you press the button to the end, it will work in the second level, i.e. Turbo level.
The indicator light will turn white when you operate the speed control button on the first level.
The indicator light will turn blue when you operate the speed control button in the Turbo level.

USING YOUR HAND BLENDER

Mount the metal foot of your hand blender to the main body by pushing it up until you hear a ‘click’.
Use your blender inside of a deep pot in order to obtain the best results and prevent the material from spreading out.
Cut the food into small pieces and then pour the pot. Put the stainless steel blender shaft inside of the pot and plug your appliance into the mains plug.
Press the operation button and operate your blender. Your blender is operating while pressing the button.
Operate your blender at short intervals. When a material is in the upright position, move it up and down by depressing the operation button of your hand-blender.

CAUTION: Operate your blender when the blender shaft is inside of the pot with food. NEVER operate outside the pot or an empty pot, it will be dangerous. After finishing your operation NEVER take the blender shaft out of inside the pot unless it completely stops.

With your hand blender; You can prepare sauce, milk, fruit juice, soup, cocktails and a milkshake or you can use it for making cooked vegetables, fruits and potatoes (eg baby food) and mixing soft ingredients such as butter, egg, flour and oil (for mayonnaise, omelette and dessert).
Never use your hand blender by pushing it on the material to be used.
After you have finished your work unplug your appliance and then remove the blender shaft from the main body. Clean the stainless steel blender shaft and blade and wipe dry with a soft cloth.

WARNING: THIS APPLIANCE HAS BEEN DESIGNED TO OPERATE CONTINUOUSLY FOR 10 SECONDS MAXIMUM. MAKE SURE NOT TO EXCEED SUCH DURATION WHEN PREPARING FOODS. OTHERWISE, THIS MAY CAUSE DAMAGE TO YOUR APPLIANCE. ALLOW TO COOL DOWN FOR 1 MINUTE PER ONE-TIME OPERATION OF 10 SECONDS.

Beating & Mixing With Beater Legs

You can easily make such mixtures as pound cakes, omelettes, pancake dough, and mayonnaise, by using the beating accessories of your Arzum Technoart MAXI NEO Blender Set.
To use beater accessories, first, mount the beaters by pushing until you make sure that such legs are properly fixed in their place.
Attach the beater adapter to the motor block, without tightening too much.
Insert your hand blender in the upright position into a deep vessel in which you put materials previously, depress the operation button, and then move the appliance circularly inside of the materials.
Never apply much pressure on your appliance.
After each use ALWAYS dismantle the beaters from the beater adapter, and wash them using water with detergent.
NEVER immerse the beater adapter in water; it would be sufficient to wipe dry with a damp cloth. Leakage of excessive water into the accessory may result in malfunctions.

Crepe dough recipe

375ml milk,
250gr fame
2 eggs.

In turbo mode, run 5 repeat intervals for 3 seconds

WARNING

Always operate your hand blender in an upright position.
NEVER use your appliance in an empty container or outdoors.
Do not press your device onto the materials hard.
Never immerse the main body of the blender in water.

Cutting With Bowl

Using the cutting accessory with a capacity of 1500 ml. of your Arzum Technoart MAXI NEO Blender Set you can cut any foods easily and practically.
Locate the cutting blades of your appliance onto the shaft in the middle part of the case.
Place the foods to be cut inside of the case, ensuring that the foods will be of the equivalent level and without piling up.
Put the cutter adapter of your device onto the case.
Place the motor body of your hand blender in its slot located on the adapter, without tightening too much.
Start the process by depressing the operation button located on the main body.
Once you have finished your work, rinse the bowl and double-sided stainless steel blade with water and detergent, and store the blade in the bowl.
NEVER immerse the cutter adapter in water. Wipe the outside with a damp cloth.

arzum-AR1114-B-Hand-Blender-Set-FIG-10

Cutting and Mixing Suggestions

The Cutting and Mixing Suggestions are the results of the tests performed, and you can determine the operation form and periods according to your taste as well.

Nutritions	Maximum Capacity	Stage	Duration
Walnut	250 gr	2 stage (Turbo)	3 sec

2-3 repeat intervals

Parsley| 50 gr| 2 stage (Turbo)| 1 sec

2-3 repeat intervals

Onion| 300 gr.| 2 stage (Turbo)| 1 sec

2-4 repeat intervals

WARNING

NEVER operate your Arzum Technoart MAXI NEO unless the main body is attached to the cutter adapter.
Do not lift the main body from its slot unless the motor fully stops.
Store the cutting blades in the bowl, since they are very sharp.

CLEANING AND CARE

Ensure that the mains plug is disconnected from the wall socket before cleaning your rod-blender, and allow it to cool down for a while.
You need to rinse the accessories immediately after using them so that the overall cleaning of the appliance can be easier.
NEVER immerse the motor (main body) in water or other liquids. Wipe the outside with a slightly damp cloth and then dry thoroughly.
Rinse the stainless steel blender shaft and blade using tepid water and soap. When cleaning under running water, take care not to leak any water into the slot on which the motor is located. If water leaks into the slot, immediately turn it upside down and shake it out, and then allow it to cool down with the blade in the upright position. NEVER wash the blender shaft in the washer machine.
You can wash the measuring bowl of your appliance by using water and soap, or in the upper section of a dishwasher.
Beater Adapter: NEVER immerse into water or other liquids. Wipe the outside with a slightly damp cloth and then dry thoroughly.
Cutter Adapter: NEVER immerse into water or other liquids. Wipe the outside with a slightly damp cloth and then dry thoroughly.
Bowl, double-sided stainless steel cutting blades, and beaters of your Arzum Technoart Maxi Neo Blender Set can be washed by using water and soap, or in the upper section of a dishwasher. Repeat the same steps after each use.

arzum-AR1114-B-Hand-Blender-Set-FIG-13

The values that are declared in markings on the product or on the papers that are given together with the product are the values that are obtained in the laboratory environment according to the related standards. These values can vary according to the usage and environment conditions of the product.

Technical Specifications

230 V ~ 50 Hz
1500 W

HANDLING AND SHIPMENT

During handling and shipment, your appliance must be kept in its original package to prevent damage to its parts.
Keep at the normal position during shipment.
Do not drop the product when transporting it and protect it from impacts.
After delivery of the product, failures and damages that may occur while transporting are not covered by warranty.

The product complies with the WEEE Directives.

WEEE
This product contains recyclable materials that comply with the WEEE directives. Do not dispose of this product as unsorted municipal waste. Please contact your local municipality for the nearest collection point.