ZENDURE ZDPVHMM Mini PV Hub User Manual
- June 17, 2024
- ZENDURE
Table of Contents
PVHub Mini
User Manual
support-eu@zendure.com
DISCLAIMER
Read all safety guidelines, warnings and other product information in this
manual carefully, and read any labels or stickers attached to the product
before using. Users take full responsibility for the safe usage and operation
of this product. Familiarize yourself with relevant regulations in your area.
You are solely responsible for being aware of all relevant regulations and
using Zendure products in a way that is compliant.
Keep this manual for future reference.
Before You Begin
The information contained here in is subject to change without notice.
For the latest version, please visit https://zendure.com/pages/download-
center.
Specifications
| Model | ZDPVHMM | ZDPVHMF |
|---|---|---|
| Application | For SBV | For Satellite Battery |
| Weight | ≈ 1.7kg | |
| Control box dimensions | 22815554mm | |
| Cable lengh | 60cm | |
| Max connected Battery Capacity | 6,438Wh(SSS) or 4,608Wh(LFP) | |
| Wireless Type | Wi-Fi , Bluetooth | |
| Mounting Type | Wall mount is availible | |
| Input voltage | VIN=40-60V | |
| Input current | Imax=30A | |
| Rated output power | Pe=800W (with one Micro-Inverter) |
Pe=1600W (with two Micro-Inverter）
Getting started
3.1 What’s in the box
3.2 Product overview
3.3 Operation Guidelines
| No | Item | Action | Indicator | Remark |
|---|---|---|---|---|
| 1 | Pairing(Wi-Fi/ Bluetooth) | Press and hold the IOT buttom for 3 seconds | loT | |
| white indicator flashes | two beeps | |||
| Paring completed | T green indicator on | |||
| on | ||||
| 2 | Fault reminder | APP prompts specific information | Fault red indicator on | 5 |
beeps
3| OTA| Operate on APP| loT g
green indicator flashe| /
3.4 Connect with SuperBase V6400/4600 or Satellite Battery B6400/B4600
Step 1
Make sure the SBV/Satelite Battery is powered off first before connect the
PVHub Mini and Micro-Inverter.
Step 2
To pluy the PVHub Mini into the parallel port of SBV/Satelite Battery and MC4
connecte together with the MC4 of the micro-inverter , then plug the other end
of the micro-inverter into the household mains socket.
Step 3
Make sure the connections above before turning on the SBV/Satelite Battery See
below connection guideline pictures :
Step 4
To open the App and pair it with the SBV/Satelite Battery. After pairing
successfully , to set start output power from the SBV/Satelite Battery on the
App .
Step 5
Then open the App and press and hold the IoT button for 3 seconds to pair with
PVHub. At this time, the IoT indicator light flashes white quickly. After the
pairing is completed, the IoT indicator light stays green.
Step 6
Then to set connection with the Micro-inverter on the App by scan the barcode
on the backside of the Micro-inverter.
Step 7
Finally ,to set the output power of the microinverter in the App and it will
work normally.
3.5
Firmware Update
Firmware Update
When using your PVHub Mini for the first time, please check for the latest
firmware using the Zendure app.
The app facilities over-the-air (OTA) updates.
Read the Zendure app user guide and access the download link here:
https://app.zendure.com/download
https://zendure.com/pages/download-center
Privacy Policy
By using Zendure Products, Applications and Services, you consent to the
Zendure Terms of Use and Privacy Policy, which you can access via the “About”
section of the “User”
https://app.zendure.com/download
Tips:
- Do not turn off the device while firmware is updating.
- Please update the firmware when the capacity is more than 20%, if Home Panel power by the SBV or Satelite Battery. in order to have enough power to complete the update.
FAQ
Q: Can the SBV/satellite battery pack be expanded in parallel when connected to PVHub Mini?
A: No.
Q: Can photovoltaic panels be connected when PVHub Mini is connected?
A: Yes. The XT-90 interface of SBV is 12-60VDC, 25A, 15,00W Max; the XT-90 interface of satellite battery pack is 12-60VDC, 10A, 600W Max.
Q: When connecti ng to PVHub Mini, can I connect to the Home panel?
A: Yes.
Q: After connecting the PVHub Mini, will the SBV/satellite battery pack output power to the PVHub Mini after it is turned on?
A: To power on the SBV/satellite battery pack, you need to connect to the App, and set up on the App to turn on the parallel port output to supply power to the PVHub Mini.
Q: Can the microinverter output power be adjusted?
A: Yes, settings and adjustments can be made on the App.
Q: When the SBV/satellite battery pack is connected to the PVHub Mini, do other AC/DC output ports still output?
A: There is output.
Q: Can PVHub Mini be connected to its brand of microinverters?
A: Not yet.
Troubleshooting
| Indicator & alarm | Potential issue | Solution |
|---|---|---|
| Red fault indicator on & 5 beeps | Communication /Pairing connection /Un-match | |
| Micro-inverter | Turn off the machine and turn on to pairing again/connect the |
match Micro-inverter .
In case any other questions , please refer to the Zendure App for details.
Or contact Zendure Customer Service for further information.
Zendure USA Inc.
ZENDURE TECHNOLOGY CO., LIMITED
Hours: Mon – Fri 9:00 – 17:00 PST
Phone: 001-800-991-6148 (US)
0049-800-627-3067 (DE)
Support / Contact:
https://zendure.de/pages/contact
https://eu.zendure.com/pages/contact-us
https://zendure.com/pages/contact
Website: https://zendure.de
https://eu.zendure.com
https://zendure.com
Zendure USA Inc.
Phone: 800-991-6148 (US)
EU Importer: Zendure DE GmbH
Address: Hoferstra3e 9B,71636 Ludwigsburg
E-mail:support-eu@zendure.com
© 2023 Zendure USA Inc. All Rights Reserved.
Printed on recycled materials. MADE IN CHINA
Documents / Resources
|
ZENDURE ZDPVHMM Mini PV
Hub
[pdf] User Manual
ZDPVHMM Mini PV Hub, ZDPVHMM, Mini PV Hub, PV Hub, Hub
---|---
References
- Zendure
- Zendure - SuperCharged | Zendure
- Zendure EU
- Contact Customer Service – Zendure – Zendure EU
- Zendure - SuperCharged | Zendure
- Contact Us – Zendure
- SuperCharged
- Kontaktieren Sie den Kundendienst – Zendure
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>