Sunnydaze Decor QZC-366 Repeating Diamond Cylinder Iron Water Fountain User Manual

: June 17, 2024
: Sunnydaze DECOR

Table of Contents

IMPORTANT NOTES:
ASSEMBLY
Care & Maintenance
Troubleshooting
IMPORTANT SAFETY INFORMATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Sunnydaze Decor QZC-366 Repeating Diamond Cylinder Iron Water Fountain User Manual

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email: customerservice@sunnydazedecor.com, or via our contact us page at https://tiny.cc/SunnydazeContact

IMPORTANT NOTES:

The water tubing is built into the fountain topper. Take care when handling the water tube; detaching the tube from the topper will damage the fountain and void the warranty.
Familiarize yourself with the flow control valve on the pump, maximum (+) and minimum (-). This may need to be adjusted to achieve optimal water flow.
The light and light cable are rated for contact with water. Use care when handling the light, jarring movements or dropping the light may cause it to burn out prematurely

Inspect packaging to ensure all parts are accounted for before disposing of packing materials.
Save the packing slip.

Parts	Qty.

ASSEMBLY

Assembly Instruction

IMPORTANT:

To prevent damaged to the power and light cables, ensure they are installed between the wire coils within the fountain body. Do not allow cords to become pinched by the fountain liner or the top rim, pinched cords can permanently damage the electrical components.

Connect the light splitter to the short pump cable.
Locate the light cable inside the fountain body and securely connect it to the light splitter.
Run the long pump power cable through the inside of the fountain body, and through the hole in the bottom of the fountain body.
Place the pump inside the liner and set the liner inside the fountain body.
Place the top rim onto the fountain body.
Locate the light cables on the underside of the topper and firmly connect them to the light splitter.
Firmly connect the pump to the water tube on the topper; the connection will be tight.
Place the topper on the liner.
Fill the liner with enough water to keep the pump fully submerged during operation.
Connect the adapter to the long pump cable.
Plug the adapter into a properly grounded GFCI outlet.

NOTE: When first used, there may be air trapped inside the pump. It may take several minutes for trapped air to escape, allowing water to flow. Refer to page 3 for more troubleshooting tips.

Care & Maintenance

Some splashing may occur; adjust the flow rate on the pump if the water rate is too high. Do not use fountain in areas that can be damaged if water happens to splash or leak.
Some climates and weather conditions increase water evaporation, requiring water to be added more frequently. Frequently check water levels during times of high temperatures, wind, and long-term exposure to direct sunlight to ensure the pump remains underwater. Never allow the pump to run dry as it will burn out the motor.
Only use water in this fountain. Distilled water will help prevent mineral buildup but is not required. Tap water is okay to use, but avoid heavily chlorinated water as it may damage the fountain and the pump.
Periodically change the water to help keep the fountain and pump clean. Remove scale and buildup regularly.
DO NOT use harmful additives such as bleach, chlorine, etc.
DO NOT use anything that is abrasive to scrub the fountain.
DO NOT use a pressure washer to clean the fountain.
Always unplug the power supply before cleaning and maintaining the fountain and the recirculating pump. Take care when handling the pump; only pick it up by the body of the pump, never the power cord.
During freezing weather, drain the fountain, disconnect the pump and store indoors; allowing ice to form may damage the fountain in such ways as, but not limited to, fountain cracking, permanent pump damage and/or lighting malfunction.
Over time, the finish may gradually mellow in color due to sun exposure; this is part of the natural aging process and is not cause for return.

Troubleshooting

If water is not flowing within several moments of the fountain being plugged in, ensure that the pump is fully submerged underwater. Add water to the reservoir if necessary. The pump may have air bubbles trapped inside, which can prevent water from circulating properly. Unplug the power supply for a few moments and plug it back in.
Check the flow control on the body of the pump, it may need to be adjusted to achieve the desired water flow rate.
Inspect the pump and tubing for obstructions.
Pump noise can be caused by trapped air, low water level, or the pump being too close to the walls of the fountain. While the pump is fully submerged, try gently tapping the pump with your finger to help release the trapped air. Also,b check if adding water or moving the pump helps to reduce noise.
If water is not flowing and the lights do not turn on, ensure the AC adapter is fully connected to the pump power cable. If only the light is not working, ensure the cables are fully connected, and the seal is adequately tightened (do not over-tighten). Ensure the connector ends are completely dry before connecting and plugging the power cord back into an outlet.
Check to make sure the power outlet is working; consult a certified electrician if in doubt about electrical connections.

If you experience issues with assembly or the product was damaged during shipping, please contact our customer service team through one of the methods mentioned at the top of page 1. Please have the item number and order information ready to expedite response time.

IMPORTANT SAFETY INFORMATION

Keep fountain out of reach of children and pets.
Make sure the power cord is away from traffic areas.
Keep power cord away from all heat sources. Do not use electrical cords in areas with high temperatures.
Check the water level frequently to ensure the pump remains fully submerged; never allow the pump to run dry as it will burn out the motor.
Always unplug the power supply before cleaning and maintaining the fountain and the recirculating pump.
Always empty and store the fountain and pump indoors during freezing weather.
Do not use fountain in areas that can be damaged if water splashes or leaks.

Any modification to the product or failure to follow recommended care will void the product warranty.

WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, or neglect of this product.

Sunnydaze Decor Logo