MAOCAO DJ-C-W78432638 Electric Height Adjustable Home Office Retangular Computer Desk Instruction Manual

June 4, 2024
MAOCAO

**MAOCAO**
Sit To Stand Table 120×60
Instruction ManualMAOCAO DJ C W78432638 Electric Height Adjustable Home
Office Retangular Computer Desk

DJ-C-W78432638 Electric Height Adjustable Home Office Rectangular

Computer Desk

If you have any questions, please feel free to contact us.
We will be very happy to answer them for you!
Height Adjustment Controller Operation

MAOCAO DJ C W78432638 Electric Height Adjustable Home Office Retangular
Computer Desk - Controller Operation

  • LED Display: Press any key once to wake up the LED display.
  • Up Key : Press and hold the UP key to raise the desk .
  • Down Key: Press and hold the DOWN key to lower the desk.
  • MemoyKey: 1, 2, 3, 4
    • Saving a height setting: Press and hold any numbered key until you hear a beep.
    • Applying a height setting: Press any numbered key and the desk will adjust automatically.

**Initialization Process / Resetting Your Desk

**

The “Initialization Process” must be done before using the desk for the first time and also for resetting your desk. To reset the desk, press and hold the DOWN key for 10 seconds until the LED display shows “Rst” and the desk will start to slowly lower. Keep holding the DOWN key while the desk is moving and the LED is still showing “Rst”. The desk will reach its lowest setting and then move up slightly until the LED shows “70.5”. Once the LED displays “70.5”, you may release the DOWN key. The “Initialization Process” is now complete.

MAOCAO DJ C W78432638 Electric Height Adjustable Home Office Retangular
Computer Desk - FIG 1MAOCAO DJ C W78432638 Electric Height Adjustable Home Office
Retangular Computer Desk - FIG 2MAOCAO DJ C W78432638 Electric
Height Adjustable Home Office Retangular Computer Desk - FIG
3

  1. Foot installation

  2. Beam installation

  3. Side wing installation

  4. Drive rod installation
    Insert the left end of the drive rod F into the hexagon bar of the left leg to the position shown in the right figure, and keep the position of the hexagon bar on the right side of the drive rod not to move, and then tighten the nuts
    Insert the right end of the drive rod F into the right let C and insert the hexagon bar to the position shown in the right figure. Then tighten the screw on F

  5. Panel splicing

  6. Panel installation

  7. Installation of manual controller

  8. Hook installation

MAOCAO DJ C W78432638 Electric Height Adjustable Home Office Retangular
Computer Desk - FIG 4.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals