DEMON Mountain Electric Bike Owner’s Manual
- June 4, 2024
- DEMON
Table of Contents
DEMON Mountain Electric Bike Owner's Manual
First of all, we would like to thank you for choosing the TRONIO electric
bike.
We warmly welcome you to our Demon Powersports family. We wish you enjoy the
numerous kilometers and happy moments with your new bike.
After the initial shipment we have made many improvements and modifications
for the TRONIO including:
Suspended seat post – Takes the shock out of the big bumps, without the cost or complexity of suspension.
Adjustable handlebar stem- Provides up to 1 1/2″ of rise and reach adjustment, for fully customizable riding position.
Upgraded Shimano derailleur- Rigid cast aluminum construction gives smoother, more precise shifting.
New gearing, with taller top gear for relaxed touring, plus a lower low gear for tight, technical riding.
IMPORTANT
Electric Bikes can be dangerous to use. The user or consumer assumes all risk of personal injuries, damage, or failure of the bicycle or system and all other losses or damages to themselves and others and to any property arising as a result of using the bicycle.
As with all mechanical components, the bicycle is subjected to wear and high stresses. Different materials and components may react to wear or stress fatigue in different ways.
If the design life of a component has been exceeded, it may suddenly fail possibly causing injuries to the rider. Any form of crack, scratches or change of coloring in highly stressed areas indicate that the life of the component has been reached and it should be replaced.
Please do not hesitate to contact us. If any problems may occur, please email
us at customersupport1@pdintl.ca for any
customer service solutions such as replacement parts, technical information,
and any other issues.
For any other commercial or general inquires please contact Demon Powersports
at 905 475 8383 or Email us at
inquiries@pdintl.ca
PLEASE NOTE: THIS MANUAL IS NOT INTENDED AS A DETAILED USER, SERVICE, REPAIR
OR MAINTENANCE MANUAL. PLEASE SEEK ASSISTANCE FROM A QUALIFIED TECHNICIAN FOR
SERVICE, REPAIRS OR MAINTENANCE.
DO NOT DISASSEMBLE, MODIFY OR REPLACE ELECTRICAL PARTS.
ASSEMBLY INSTRUCTIONS
Your bike has been pre-assembled and requires only a few simple steps to get it ready for you to ride:
-
Remove the outside carton after cutting the nylon bands. Remove all the inside cardboard protection and bubble wrap. Carefully remove your bike from the carton and gently rest it in place
-
Ensure the following pieces are included in the package. If there are any missing parts, please contact Demon for help replacing missing pieces.
a) Bike
b) Pedals
c) Charger
d) Key for battery pack (usually attached with plastic tie either on the handlebar or on the battery) e) Assembly Tools -
Install kickstand with provided hardware and tools.
-
Install Left and right pedal with provided wrench, make sure check the “R” and “L” marking on the pedal before installation.
-
Install the front wheel on the front suspension fork, make sure to align the brake disk with the brake caliper.
-
Remove the bubble wrap and rubber band from the steerer tube, install the handle bar and stem assemble on the steerer. Align the stem with the front wheel, then flip open the hinged cap on the stem, tighten the top stem bolt with the provided Allen wrench. Make sure there is no up and down play between the suspension fork and the frame tube.
-
Rotate and adjust the handle bar to a comfortable angle, then tighten the long bolt on the stem to secure the handle bar. Firmly tighten the two side bolts on the stem, make sure there is no play in the whole assembly.
-
Use the provided bolt and nut to install and secure the front fender and headlight. Fender can be adjusted by two side screws on the support bracket. Make sure there is no interference between fender and the wheel.
-
Connect the connectors near handle bar. Locate the battery key (usually tied to handle bar), use the key to open the battery lock on the frame, insert the upper portion of the battery into the frame, then turn the switch, drop in the battery and turn the key to secure the battery.
BATTERY CHARGING
Included with your new TRONIO is a lithium ion battery, along with a charger, which plugs into a standard household electric receptacle. A lithium ion battery requires specially designed chargers. You should never charge your battery with a substitute charger that is not designed for this use.
Your TRONIO battery arrives with 70% charge. It is recommended that you fully
charge the battery before your first use. The TRONIO battery may be charged
while on the bike or removed and charged at a location away from the TRONIO.
To charge the battery please follow the steps below:
– Remove the rubber cover on the charging socket
– Place the charger in a flat, secure place, and connect the DC output plug
from the charger (round barrel connector) to the charging port on the side of
the battery pack.
– The indicator light on the charger will be red / orange when battery is
charging and will turn green when fully charged.
The charger will charge a fully depleted battery in 3– 4 hours. If the battery
will not be used for an extended period of time, charge it fully and recharge
it every 2 months. Store it in a cool, dry place. If you experience unusual
sounds or odors coming from the charger or the battery, unplug charger
immediately and contact Demon Powersports customer service.
BATTERY CHARGING TIPS
– Recharge battery after every use. This will keep the battery in good shape
for longer time.
– Do not allow any liquids near or inside the battery charger.
– Do not charge the battery with any other chargers then what was originally
supplied with your TRONIO
– Fully charge the battery before each use to extend the life of the battery
and help to reduce the chance of over discharging the battery pack.
– Do not place the battery near fire or corrosive substances.
OPERATION
Your TRONIO is equipped with an LCD meter that monitors pedal assist, speed, odometer, trip distance, riding time, and battery energy level. To turn the meter on, make sure the battery is fully inserted into the TRONIO battery holder.
DISPLAY
Features
- Suitable for low temperature, Max -20℃.
- High-contrast 3.2inch IPS colourful matrix screen.
- Ergonomic external button design, easy to operate.
- Speed display: AVG SPEED, MAX SPEED, and SPEED (Real-time).
- Kilometre / Mile: Can be set according to customers’ habits.
- Smart battery indicator: Provide a reliable battery indicator.
- 9-level Assist: 3-level/5-level/9-level optional.
- Mileage indicator: Odometer/Trip distance/ Clock/ Riding time.
- Power indicator: real time power indicator, digital or analog.
- Battery information needs to be supported by battery communication）
- DST indicator needs to be supported by battery communication）
- Self-Testing
- Speed limit value indicator
- Error code indicator.
- Light sensor (Optional )
- Software upgraded: Software can be upgraded through UART.
- USB charging port: 5V/500mA
TFT Screen Instructions
Power On/Off
Press and hold Power button for 1 second can turn on/off the display. The
Display can automatically shut down when there is no operate & ride for X
minutes (X could be0~9).
*If the display has been set password power on, you need to input the right password before start.
Assist level operating
Short press UP/DOWN button can change the assist level. Top assist level is 9,
0 for neutral. Level quantities can be adjusted according to the customer
requirements.
Speed & Mileage mode switch
Short press POWER button can change the speed and mileage mode,
TRIPODORANGETRIPTIMEMAX SPEEDAVG SPEED
**If there is no operation for 5 seconds, display will return Speed (Real Time) display automatically.
Headlight/backlight On/Off
Press and hold UP button for 1 second can turn on/off the headlight, and the
screen will switch to the corresponding mode.
*The motor does not work when the battery voltage is low, display still can keep the headlight on for a while when E-bike is in riding.
Walking mode (6km)
Press and hold DOWN button for 2 second can get into walking mode,
out of the mode when releases the button.
- This feature needs to be supported by controller.
Data clean-up
Press and hold UP & DOWN buttons together for 1 second can reset several
temporary data, temporary data include AVG Speed / MAX Speed / Trip / Time.
- These temporary data can’t be erased by power off.
Parameter setting
Double press POWER button (press interval less than 0.3 second) can get into
setting menus, press UP/DOWN buttons to change the parameter setting, press
POWER button can switch to next item. Double press POWER button will exit from
menu.
- Display will automatically quit menu when there is no operation for 30 seconds.
- For safety reasons, display can’t get into MENU when riding.
- Display will quit MENU when start riding.
The order of parameters is as follow.
System: Press Up / Down button to switch between Metric / Imperial.
Error Code Definition
850C can show warning message, icon shows on the screen, and show error code at the bottom of the screen, error code from 01~25, definition see the table below.
WARNINGS AND SAFETY
You should check the operation of your brake inhibitor switches before every ride. While riding slowly in a controlled environment (like a driveway), engage the motor, then squeeze each brake in turn. The motor should lose power immediately and remain off as long as a brake lever is depressed.
Always use the lowest assist setting until you are comfortable with the bike and feel confident controlling the electric assist.
Keep your hands on the brake levers and remember that they will always slow or stop the bike if pulled.
Use only the battery provided with your bicycle. Even if it is physically possible to connect another type of battery, it is dangerous and potentially damaging to do so.
Never short circuit on the discharge terminals of the battery. A short circuit will damage the battery and could cause a fire resulting in severe injury or death, and property damage. When handling the battery outside the bicycle, be aware of conductive materials that may short the battery terminals, such as coins, nails, etc.
Electric bikes are faster and heavier than normal bikes. When riding in wet weather, you should use extra caution.
Local laws may prohibit the use of high-speed electric bicycles on bike paths or trails. Be sure you are familiar with the laws in your area. Even if legal, it is usually not safe to ride at high speed on paths or trails around other users.
Like any mechanical device, a bicycle and its components are subject to wear and stress. Different materials and mechanisms wear or fatigue from stress at different rates and have different life cycles. If a component’s life cycle is exceeded, the component can suddenly and catastrophically fail, causing serious injury or death to the rider.
Scratches, cracks, fraying, and discoloration are signs of stress-caused fatigue and indicate that a part is at the end of its useful life and needs to be replaced.
Electric Bikes can be dangerous to use. The user or consumer assumes all risk of personal injuries, damage, or failure of the bicycle or system and all other losses or damages to themselves and others and to any property arising because of using this bicycle.
Website: www.demonelectric.ca
Address: 310, Steelcase Road East, Unit A,
Markham, Ontario Canada L3R 1G2 Toll Free:
1-855-373-4685
Telephone: 905 475 8383