Buytra NS-103 Nut Milk Maker Instruction Manual

Buytra NS-103 Nut Milk Maker Instruction Manual

Product parameters and parts name the actual product snail prevail

Component Name

Product Parameter

Instruction Manual

Function Description Of The Operation Panel

Auxiliary Function
[Reservation/timing]

1. Press [Schedule Adjustment] the first time to enter the schedule state. Press the second time to adjust the schedule. Each click increases 1 hour (long press to increase quickly, maximum reservation 18 hours). Adjust to 18 hours and then press back to 1 hour cycle. ( 1 H stands for 1 hour).
2. After confirming the reservation time, press the” Function/Cancel” key to select the function (all functions can be reserved). After confirming the function, the corresponding function light will be on, and the program will automatically enter the running program after 3 seconds line tone.

[Function/cancel]

1. Press the [Function/Cancel] key to select the required menu functions, which are successively: concentrated soymilk, micro-pressed soymilk rice paste, auxiliary food, boiled fruit juice, heat preservation, high temperature washing.
2. When the function is running, hold down [Function/Cancel] for 2 seconds to cancel the current work and return to the standby state.

Functional Operation Diagram

Work Schedule

Recipe

Thick Soymilk:
1 cup dried soybeans (about 50 grams), add water to the highest water level; After the program starts, the function light comes on and starts heating. Soybean milk finished, enter standby state. Note: It is not allowed to open or move the lid during the operation
of soymilk. If you open the lid accidentally, pour out the mixture in the cup, add water and soybeans again, and operate again. Otherwise, it is easy to cause paste bottom and serious overflow.

Micro pressed Soymilk:
1 cup dried soybeans (about 50 grams), add water to the highest water level; After the program starts, the function light comes on and starts heating. Soybean milk finished, enter standby state. Note: Soy milk is not allowed during execution open or move the lid. If you open the lid accidentally, pour out the mixture in the cup, add water and soybeans, and operate again. Otherwise, it is easy to cause paste bottom and serious overflow.
(Characteristics of micro – pressed soymilk: the production time of micro – pressed soymilk is shorter than that of thick soymilk).

Rice paste:
Spoon rice (about 75g), add water to the highest water level ; After the program starts, the function light will turn on and start heating. After the work is finished , the standby state will be entered. Note: It is not allowed to open or move the lid during the execution. If you open the lid accidentally, pour out the mixture in the cup, add water and rice again, and operate again, otherwise the bottom will be burned easily. After the program is completed, beep 6 into the standby state.

Complementary food:
Add appropriate amount of auxiliary food materials and water to the highest water level; After the program starts, the function light comes on and starts heating. After the preparation of auxiliary food, enter the standby state.
Note: It is not allowed to open or move the lid during the preparation of supplementary food. If you open the lid accidentally, pour out the mixed materials in the cup, add water and food again. Otherwise, it is easy to cause paste bottom and serious overflow.

To boil water:
Add water does not exceed the highest scale, after the start of the program, the function light long bright digital display water temperature and start to work, the water temperature display 00 indicates that the water has been boiled, and then enter the
standby state.
Note: It is not allowed to open or move the lid during the process. Juice:

According to personal preferences, add fruit and water, suggested that the ratio of fruit and water 3:1 (because of the different taste of each fruit, can be appropriate to adjust the intensity ratio), not more than the highest water level scale line, select the “juice”
function, 3 seconds after the program automatic execution after the completion of the program beep 6 sound into standby state.

Heat preservation:
Select the “insulation” function, and the product will work according to the insulation temperature. When the insulation temperature is lower than the set temperature, the heating will start; when the temperature is higher than the set temperature, the heating will stop. The default holding time is 6 hours and the default holding temperature is 55 oc.

High temperature wash:
Cleaning time (about minutes), the default temperature of 80°, add water to the highest water level, after the program starts, the function light is on and began to heat, reach the temperature, the product runs stirring to complete the working time, after the program is completed beep 6 sound into standby state.

Abnormal Alarm

1. dry burning prevention: dry burning product display “E3″ (and emit continuous rapid 3″ di di di”, ring 3 times) must be renewed. Power-on clear error (dry burning temperature 110°).
2. thermistor open circuit alarm :E1 and emit continuous rapid 3 “di di di”, ring 3 times; After the open circuit problem is solved, it is necessary to power on again to clear the error report (power on test thermistor open circuit alarm)
3. thermistor short circuit alarm :E2 and emit continuous rapid 3 “di di di”, ring 3 times. After the short circuit problem is solved, it is necessary to power on again to clear the error report (power on to detect the short circuit alarm of thermistor).
4. Abnormal closing cover alarm :E4 and emit three consecutive and rapid “di di di”. Ring three times. Close the cover and recover within 1 minute, ring and return to the working state, otherwise enter the standby state.

Maintenance

Cleaning Method

Cleaning and Storage

1. After cleaning, it is recommended to dry or air dry, and then assemble the machine for storage.

2. Store the product in a dry and ventilated place.

3. Do not disinfect or dry in the disinfection cabinet or dryer.

4. If after pulping, the stainless steel surface inside the cup body produces local discoloration, blue is a normal phenomenon, harmless to human body, please res t assured to drink. (Phosphoric acid ions in food and calcium, magnesium ions, etc.,
   crystallization under certain temperature conditions resulting in blue, can be wiped away with vinegar).

5. Please dry or air the lid after cleaning before placing it on the cup body to avoid odor.

6. After cooling the machine, please clean or dry it in time and store it in a dry and ventilated place.

Warm Reminder
Do not use wire ball to clean the machine, it is recommended to use hot water and detergent soaked after cleaning.

Safety Precautions

In order to prevent electric shock, fire, scald and other accidents, please comply with the following:

1. Clean the cup body, blade, and lid in time. The edge of the blade is sharp.

2. Do not touch the inside of the cup body, the upper cover, the blade and other parts before cooling after the completion of the work, so as to avoid burns.

3. Do not lift the machine with the lid to avoid the cup body slipping.

4. Do not use damaged power cables or plugs to prevent injury or fire caused by electric shock or short circuit. If power cables are damaged, special power cables must be purchased for replacement.

5. Do not add hot water above 70°C for pulping, so as not to affect the taste or cause bad crushing, slurry overflow and other anomalies.

6. Do not drink until pulping is completed. Uncooked soy milk is harmful to human body after drinking.

7. Do not immerse the machine in liquid or water. Keep water away from the bottom of the power socket and cup body. In case of water, please stop use or dry, dry before use, to avoid short circuit or electric shock.

8. Take good care of children to ensure that they do not play or approach the product to avoid burns or personal injury caused by mis operation.

9. Only when accompanied by a guardian or experienced personnel, can the product be used by people with abnormal Behavior ability or without independent Behavior ability.

10. Before use, ensure that the local power supply is consistent with the power supply marked on the product; otherwise, the product may be damaged or fire may occur.

11. Please operate on a stable level table and keep away from the edge of the table to prevent bumping.

12. Do not use this product under or near curtains and other flammable materials, otherwise it may cause fire.

13. Rotate the lid to the cup body and insert the power cord into the power socket.
    Please ensure that it is properly installed to Prevent loose power failure or overheating combustion.

14. When the product is working, keep a constant distance from the socket and other live objects, so that the plug is within reach and away from inflammable and explosive items. At the same time, the grounding wire of the power socket must be well grounded.

15. After the product starts to work, in case of power failure or other abnormal events, please pay attention to replace the food materials before re-making, otherwise it will cause the paste bottom, the slurry overflow, alarm and other failures.

16. After the production is completed, please power off before pouring, in order to avoid electric shock due to the cup body movement and poor wire contact.

17. The temperature of freshly made drinks is high, please use high-temperature resistant vessels and pay attention to safety. Prevent burns caused by spillage of drinks.

18. If filtration is required, please note that the residue temperature attached to the strainer is higher. When cleaning the screen, do not face the person and pay attention to safety, to prevent the residue spatter.

Use Prompt

1. This product is only suitable for home use, do not use for commercial use.
2. It is normal that some ingredients contain natural pigments, which may cause staining of the upper lid. Does not affect the drink, please rest assured that drinking is not harmful to health.
3. In order to fully crush and release nutrition machine beating intermittently fast and slow sound, is a normal phenomenon.
4. Do not make pulping continuously for a long time, otherwise the motor may start the automatic protection function, the motor will stop working, and can be used normally after the motor is completely cooled.
5. After the pulping is completed, the next pulping should be carried out at an interval of more than 8 minutes; otherwise, the service life of the product will be affected.
6. Infants, people with renal failure and weak gastrointestinal function should choose low concentration soy milk or reduce drinking as appropriate.

Food Contact List

This product meets the requirements of the relevant national food safety standard GB4806.1-2016. The compliance information of the implementation standard for “food contact” materials is listed as follows:

Note:

1. Instructions for special use: Please use the product in strict accordance with the instructions and the attached materials
2. The food contact parts of this product are included in the table above , some models may not contain individual materials, the actual product shall prevail.

Fault Analysis

Remarks:
The above phenomenon still cannot be removed, please contact the customer service center, non-professional personnel are strictly prohibited to disassemble.

Hazardous Substance Declaration

According to GB/T26572-2011 (also known as China RoHS2.0) GB/T26572-2011 (also known as China RoHS2.0), the following part lists the name and content of hazardous substances that may be contained in this product;

“O “means that the content of the hazardous substance in all homogeneous materials of the part is below the limit requirements specified in GB/ T26572- 2011. “X”. Indicates that the concentration of the hazardous substance in at least one homogeneous material of the part exceeds the limit requirements specified in GB/T26572-2011 due to prior art and process limitations.

Environmental lifeNote:
All electrical and electronic products sold in China must be marked with an environmental protection date. The label’s environmental life refers to the life under normal service conditions, temperature and humidity, and does not include batteries and other consumables.

Warranty Card | After-sales Service (product)

Related information

Maintenance record

Thank you for buying and using this product. All the products of this brand purchased from authorized units or online stores can enjoy the following after-sales service with this card. If quality problems occur within 7 days of purchase, the product can be
returned or replaced unconditionally.2. From the date of purchase of the product – within the year of quality problems, free warranty (glass, purple sand, ceramic similar products are not within the scope of warranty)Statement: The following circumstances will not provide after-sales protection.1. Purchase products of this brand from unauthorized units or online stores.2. Products purchased from authorized units or online stores without warranty cards.3. The warranty card is incomplete or altered. The contents on this card are inconsistent with the real goods.4. Failure to use, maintain and maintain according to the instructions, resulting in artificial damage or self- disassembly. Caused by irresistible natural disasters.

Foshan Nashan Electric Appliance Co., LTD
Address: Nashan Electric Appliance, No. 6, Gaozan Gaogui North 6th Road,
Xingtan Town, Shunde District, Foshan City, Guangdong Province

Foshan Nashan Electric Appliance Co., TLD

Documents / Resources

| Buytra NS-103 Nut Milk Maker [pdf] Instruction Manual
NS-103 Nut Milk Maker, NS-103, Nut Milk Maker, Milk Maker, Maker
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>