BexGears 012 DIY Electric Guitar Kits Installation Guide
- June 17, 2024
- BexGears
Table of Contents
BexGears 012 DIY Electric Guitar Kits Installation Guide
Thank you for purchasing a Bex Gears kit!
All the parts you need are included, even a set of strings in the most popular
gauge for this kind of instrument.
“Please note that while the materials & craftsmanship are of the highest
quality, wood is a natural material that can vary from piece to piece, and is
affected by climate.
This means that some of the parts may change slightly during shipping and
handling, and you might consider professional assistance in case parts do not
fit or align properly, and if setup and adjustment are required after
assembly.
There are many videos available online about kit assembly some not affiliated
with our company, that may be helpful.
Bex Gears cannot be held accountable for problems caused by end users such as
improper finishing, third-party parts and component incompatibility, and
abuse.”
YOU NEED A SCREWDRIVER
YOU NEED A WRENCH
YOU NEED TO USE WIRE CUTTERS
PAY ATTENTION TO ASSEMBLIN G
Assembly Instruction
LIST OF ALL PARTS SUGGESTED ASSEMBLY SEQUENCE
THE FIRST STEP/ASSEMBLING OF TUNRES LIST OF PARTS
THE FIRST STEP/ASSEMBLING OF TUNRES ASSEMBLY SEQUENCE
THE SECOND STEP/WIRING LIST OF PARTS
THE SECOND STEP/WIRING ASSEMBLY SEQUENCE
THE THIRD STEP/NECK PLATE AND STRAP BUTTON LIST OF PARTS
THE THIRD STEP/STRAP BUTTON ASSEMBLY SEQUENCE
THE FOURTH STEP/STRING LIST OF PARTS
THE FOURTH STEP/STRING AND TRUSS ROD ASSEMBLY SEQUENCE 01
THE FOURTH STEP/STRING AND TRUSS ROD ASSEMBLY SEQUENCE 02
Documents / Resources
|
BexGears 012 DIY Electric Guitar
Kits
[pdf] Installation Guide
012 DIY Electric Guitar Kits, 012, DIY Electric Guitar Kits, Electric Guitar
Kits, Guitar Kits
---|---