OVICX-Q200 Spinning Bike Instruction Manual
- June 4, 2024
- OVICX
Table of Contents
OVICX-Q200 Spinning Bike Instruction Manual
INSTRUCTION FOR SAFE USE
NOTE:
Please read the instructions carefully before using this equipment.
I. Instructions for safe use
Thank you for purchasing our products. The correct use of this machine is the guarantee of safety and health for you. Please read the following content carefully before using the exercise bike:
- It is important to read the manual before installation and use. Only with the normal installation, maintenance and use of this equipment can you do the exercise safely and effectively.
- Before starting an exercise program, please consult your doctor to learn your current physical condition and confirm if it will cause harm to your health when you use this equipment to do the exercise. If you are in the process of treating heart rate, blood pressure and cholesterol, your doctor’s advice will be very necessary.
- Pay attention to some symptoms of your body. Incorrect and excessive exercise will do bad to your health. If you have the following uncomfortable symptoms: pain, chest tightness, rapid heartbeat, tachypnea, feeling top-heavy, dizziness and nausea, please stop the exercise immediately. If you want to continue your exercise plan, please consult your doctor first.
- Please make sure children and pets stay away from this equipment, as this is designed for adults.
- Please cushion the bottom of the equipment with a strong and flat material to protect your floor and carpet. For safety reasons, please make sure that at least 0.5m of free moving space is reserved around the equipment.
- Before use, please make sure the screws and nuts are tightly locked.
- Please use this equipment carefully. If you find any defects during the installation or use of the equipment, or hear any abnormal sound, please stop the exercise immediately, and do not continue to use it until the problem is solved.
- When doing the exercise, please wear clothes that fit your body in order to prevent loose clothes from tripping over or restricting exercise. Please note that incorrect and excessive exercise might cause harm to the body.
- This equipment is only suitable for indoor and domestic use.
- Please be careful when moving the equipment in order to avoid unnecessary injury.
- This product cannot be used as medical equipment.
PARTS LIST
After unpacking, check whether all parts are delivered according to following
list. In case of any insufficiency, contact your dealer.
They may be attached to each part.
The specifications of each part are for reference only
NAME OF EACH PART
Assembly Method
Assembly should be done by two adults or more. Also, temporarily fix the screws, and then screw it tightly. Keep your fingers away from moving parts.
HOW TO USSE LOCK BOLT
LOOSEN LOCK BOLT PULL KNOB TOWARD YOU SO THAT YOU CAN SILDE ADJUSTMENT PART
RELEASE KNOB AND OF LOCK BOLTS GOSE BACK AFTER ADJUSTMENT TURN LOCK AND FIX IT TIGHTLY
HOW TO USE HIGHT ADJUSTMENT LEVER
LOOSEN LOCK BOLT PULL KNOB TOWARD YOU SO THAT YOU CAN SILDE ADJUSTMENT PART
RELEASE KNOB AND OF LOCK BOLTS GOSE BACK AFTER ADJUSTMENT TURN LOCK AND FIX IT TIGHTLY
Fix pedals on right and left sides with lock nuts. Make sure rotation is in correct direction, right or left.
CAUTION: turning right ward or leftward may change direction
after tightening all screw assembly is completed
About load adjustment knob
| Rotation direction | Function |
|---|---|
| Clockwise | The larger the flywheel resistance, the bigger the load. |
| Counterclockwise | The smaller the flywheel resistance, the smaller the load. |
Caution: Tightening too much may cause the pedal can not move. Too loose (completely loose) while pedaling may cause injury or damage.
About brake/lock function
You can brake by pushing in load adjustment knob downward. When not in use, turn the load adjustment knob clockwise, tighten it, and then lock the brake.
ABOUT ADJUSTMENT OF EACH PART
Saddle Angle Adjustment
Base fine-tuning
Belt Adjustment Method
By removing cover, the tension of belt adjust may be adjusted. It may be difficult for beginners to make adjustment. In this case, don’t push yourself too hard, and please ask help from experienced person.
Note
Serious unbalance of left and right nuts will destroy the balance of flywheel and belt. Keep in mind that cycling with serious flywheel deviation may cause serious failure or major accident.
REMOVE PEDAL COVER
If you are a veteran, you may ride bike without pedal cover. II
IF you remove pedal from the body the cycling will become more smoothly
HOW TO MOVE THE BIKE
When moving the bike for a short distance, you can tilt front part, and move it on floor by using the caster fixed to the bottom of front base. Be sure to move bike on flat and smooth floor. Two adults are needed to move bike for a long distance, e.g. from one room to another.
POSSIBLE FAILURE
| Fault | Solution |
|---|---|
| Display meter does not work |
- Check the polarity (+ and -) of dry batteries.
- Check cable connection in assembling sequence again.
- Remove batteries from panel, and reinsert them again at least 10 seconds later.
Abnormal screen display (888, EE, etc.)
Pedal does not rotate smoothly|
- Pedaling backward, then forward (Belt deviation can be corrected by pedaling backward).
Strange noise produces when pedaling.|
- Check no looseness in tightened pedals on left and right.
Pedal does not work at all.|
- Loosen the load adjustment knob when it was locked.
Machine makes rattling noise.|
- Perform fine-tune on Base as shown in Page 90.
if fault fialed to be corrected by the above mentioned solution please contect your dealer and tell it your troubles.
ABOUT AFTER SALES SERVICE
We would love to hear from you, if you have any questions, please contact us freely. Email: support@qiaosports.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>