HONE AROMA V2 Pillar Scent Diffuser User Manual

HONE AROMA V2 Pillar Scent Diffuser

SPECIFICATION

• Model No.: A8
• SIZE: R84mm* H 274mm
• Net weight: 9009
• Voltage: 5V2A
• Power: 8W
• Battery: 4000mAh
• Coverage: up to 200 cube meters
• Bottle: 100ml
• Material: Aluminum

IMPORTANT

Make sure the bottle is screwed in tight and parallel to the upper of the diffuser.

After installation, please keep the machine vertical. Tilted or angled may cause oil overflow, which will contaminated equipment circuit and affect the normal use and unnecessary waste.

SETUP

1. To open your scent diffuser, rotate the upper part of your device in a counterclockwise motion, while firmly holding the bottom.

2. Remove the empty oil bottle from the diffuser by turning it clockwise. Save this to use in the cleaning process of your diffuser.

3. Select your fragrance oil and carefully screw the bottle counterclockwise into the diffuser.

4. Once you have securely screwed on the fragrance oil, close the unit by sliding the upper back into place and turning clockwise.

5. Connect the power adapter into the diffuser’s power port and plug it into 110V power outlet.

REMOTE CONTROL FUNCTIONS

Power on the diffuser.

Power off the diffuser. Press and hold for 5 seconds to reset the device to the factory default settings,

INTENSITY SETTING

• Diffusing for 10 seconds and pausing for 240 seconds.

• Diffusing for 20 seconds and pausing for 120 seconds.

• Diffusing for 25 seconds and p&1sing for 60 seconds,

WORKING TIME SETTING

• Indicates the diffuser will work for 2 hours of time length.

• Indicates the diffuse will work for 4 hours of time length.

• Indicates the diffuser will work for 8 hours of time length.

• Indicates the diffuser will work for 12 hours of time length.

Light mode control:

• Mode 1: Light on only when atomizing,
• Mode 2: Always on.
• Mode 3: Always off.

Touch Screen Control

• Diffusing for 25 seconds and pausing for 60 seconds.

• Diffusing for 20 seconds and pausing for 120 seconds.

• Diffusing for 10 seconds and pausing for 240 seconds.

• Press and hold for 2 seconds to turn the diffuser on.

• Press twice to change the lighting mode.

• Press once to turn the diffuser off.

EQUIIPMEINT CILEANING

Your scent diffuser  should be cleaned every 1-2 months and when switching fragrance to ensure optimal performance.

1. Fill the empty oil bottle that came with your diffuser with 1/4 Inch of rubbing alcohol.
2. Screw the alcohol-filled bottle into the diffuser.
3. Run the diffuser for 15 m ins to ensure the alcohol can filter through the whole device.
4. Unplug the device from the wall out let and keep the diffuser in an upright position. Wipe the device with a damp cloth to remove oil stains and fingerprints. Avoid using an y harsh , or abrasive cleaning products.
5. Remove the alcohol-filled bottle, insert new fragrance oil. Reconnect both halves of the diffuser and plug it into the wall outlet. You are ready to begin a new scenting.

REPLACING THE, NOZZLE

1. To change the nozzle, unplug the diffuser, remove the bottle o f oi I, and carefully pull out the clear tube. Gently pull out the black nozzle by wiggling it gently using a pair o f tweezers.
2. Replace it witl1 a new nozzle and ensure the nozzle is pressed very firmly into the top of the diffuser. The tube can be reinserted into the nozzle. It is very important that you put the tube in o the com;1ct opening of the nozzle other Wise the nozzle there is a small round tube holder that the tube needs to be firmly secured into.

SAFETY

To ensure safe usage, follow these precautions:

1. Do not not tilt the diffuser as oil can spill inside the device and damage the mechanics.
2. Use the scent diffuser and fragrance oils requires adult supervision.
3. Do not wet the device or place it near any liquids, sinks, bathtubs, or outdoors.
4. Do not use the device with any power cord other than the one provided with your diffuser. Position the power cord to prevent it from being a tripping hazard. Before connecting your diffuser to a power outlet, check that the voltage label specified on the adapter is the same as the power supply.
5. Do not run the unit on empty. Unless there is oil in the bottle or alcohol for cleaning, turn the device off.
6. Do not ingest any fragrance oil or apply them to any part of the skin. Keep oils out of contact with eyes, ears, nose, mouth, and any other bodily opening. If contact does occur, flush with water immediately until all traces of oil have been removed entirely from the area.

Troubleshooting

• Bottle is loose. Screw it in properly and straight

**** No diffuse|

• Check if the power is ON or OFF.
• The pump is damaged and needs replacing.
• If there is no diffusion or it is weak, replace the oil with rubbing alcohol and run it through the machine for S minutes.

**** Little or no spray coming out|

• Atomization head is blocked. Clean diffuser by running rubbing alcohol through it. Or replace diffuser core.
• Diffuser core with straw is missing or damaged. Replace with a new one.
• Pump is damaged and may need replacing.

****  Diffuser spraying liquid|

• Diffuser core is damaged, replace diffuser core.
• Machine is tilted or angled, Make sure its upright at all times.

**** No display on screen|

• Make sure the power is ON.
• Display screen is damaged. try remote control.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>