X DOME 61611725 Amplifier 100v 60w Wifi USB User Manual

X DOME 61611725 Amplifier 100v 60w Wifi USB

Product Specifications

• Model: AMPLIFICATORE PA 60W USB / BLUETOOTH / WiFi
• Power Output: 60W
• Connectivity: USB, Bluetooth, WiFi
• Model Number: 61.6117.25

Product Usage Instructions

Powering On the Amplifier

To power on the amplifier, locate the power button on the front panel and press it.

Connecting via Bluetooth

To connect a Bluetooth device, enable Bluetooth on your device and search for the amplifier’s name. Once found, pair the devices.

Using WiFi Functionality

For WiFi functionality, ensure the amplifier is connected to a WiFi network. Use the provided instructions to set up and configure the WiFi connection.

LED Indicators

The LED indicators on the front panel provide information such as CLIP, PROT, and MIC 1 status. Refer to the user manual for detailed explanations of each indicator.

Warnings

• The lightning flash with an arrow in an equilateral triangle symbol is intended to alert the user to the presence of uninsulated “dangerous voltages” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to person.
• The exclamation point in an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the documentation accompanying the product

Important Warnings

• Do not expose the unit to rain or environments where water or other liquids may be sprayed, as this may cause fires or short circuits.
• Do not install the unit in places exposed to direct sunlight or heat sources, which may cause fire or electric shock.
• Use the unit only with the voltage specified on the unit. Using a voltage higher than that stated may result in damage to the unit.
• Do not cut, damage or modify the power cable. Also, avoid using the power cable near heat sources.
• Ensure that you have secured the earth with the earth terminal to prevent shocks.
• If smoke or a strange smell is detected, unplug the unit immediately. If the power cable is damaged, disconnect the unit.
• Do not place objects containing liquids on top of the unit. Do not insert or drop metal objects or flammable materials into the cover slots of the unit, as this can cause damage to the unit.
• Do not block the ventilation slots in the unit cover.
• The power supply is always the last operation. The power plug must always be inserted without applying force. Ensure that the plug is firmly connected to the socket.
• Do not use the device near sources of heat or cold. Failure to observe these precautions may result in damage to the power cord, fire or lethal electric shock.
• If extension cords are used, check that the core diameter is sufficient for the power consumption required by the device. All warnings regarding power cords also apply to any extension cords.
• Always disconnect the device from the main power supply when not in use or before cleaning. Disconnect the power cable only by the plug, never disconnect it by pulling on the cable. Failure to do so may result in damage causing lethal electric shocks.
• If the power plug or the device is dusty, you must stop using the device, disconnect the cables, and clean it with a dry cloth. Dust can reduce insulation and cause lethal electric shocks. Stubborn dirt on the inside and outside of the device should be removed by a specialist.
• Never install the amplifier next to highly sensitive devices such as preamplifiers or cassette decks, as the strong magnetic field of the amplifier can cause hum in such devices. The magnetic field is strongest directly above or below the amplifier. If a rack is used, the amplifier should be installed at the bottom and highly sensitive devices at the top.
• Only connect the device with the power switch switched off. Never connect inputs or outputs to any power source (mains, batteries, etc.)
• The device generates heat when in use, so leave about 10 cm of free space on both sides, and 5 cm of free space at the top, and ensure airflow to the front and back of the device.
• Maintenance and servicing must only be carried out by qualified personnel or authorized centers.
• The use of loudspeaker systems with an amplifier can produce excessive sound pressure levels that can lead to permanent hearing loss.
• To avoid fire or electric shock, never open or remove the unit housing as there are high-voltage components inside.

The information contained in this manual is subject to change without notice and does not represent a commitment on the part of the supplier

Operating Requirements

• This product is a professional device for amplifying audio signals. The product can only be used with 230 Vac/50 Hz AC power and is designed for indoor use only.
• When choosing the installation location, ensure that the device is not exposed to extreme conditions of heat, humidity or dust. Avoid leaving cables around the device as they may pose a danger to yourself and others / When choosing the installation location, ensure that the device is not exposed to extreme conditions of heat, humidity or dust. Avoid leaving cables around the device as they may pose a danger to yourself and others.
• The ambient temperature must always be between -5°C and +45°C. Keep the unit away from heat sources. Relative humidity must not exceed 50%.
• Never use solvents or aggressive detergents to clean the device. Use a soft, moistened cloth. Use the original packaging to transport the device.
• When using this loudspeaker system in public or industrial areas, it is necessary to follow a number of safety instructions that are only partially illustrated in this manual.

Package Contents

• Wi-Fi amplifier
• AC power cable
• Antena
• Audio cable
• User Manual

Description

• This WI-FI/USB/BT amplifier (mixer) is designed as a viable solution for small and medium-sized installations. Compact in size and equipped with USB input and Bluetooth and Wi-Fi connection.
• One of its outstanding features is Wi-Fi music streaming, supporting connection to the device via a free MUZO Player APP. An RJ45 port is available on the rear panel as a backup for connecting the amplifier in places where the Wi-Fi signal is weak.
• Equipped with 70-volt or 100-volt line and low-impedance 4Ω and 8Ω loudspeaker outputs.
• There are three balanced XLR microphone inputs on the rear panel. Via the ‘VOICE PRIORITY’ button MIC1 can be used with priority over the other inputs, MIC1 has another 6.35mm jack port on the front panel.
• Equipped with overtemperature, overload, overvoltage and short-circuit protection. Also equipped with current limiter.

Features

• Bluetooth interface and USB player
• Connect your smartphone, tablet, etc. to the amplifier via the “MUZO Player” App
• One RJ45 port available for use in places where the Wi-Fi signal is weakest.
• Loudspeaker output on 70/100V line and low impedance 4/8Ω.
• SMT printed circuit boards with highly stable performance.
• Three microphone inputs with XLR, AUX 6.3mm, AUX RCA sockets (selectable)
• MIC input 1 has priority over the other inputs
• Individual volume control for the various inputs and master volume control
• LOW and HIGH tone adjustment
• Equipped with overtemperature, overload, overvoltage and short-circuit protection.

Front panel

1. USB input interface: allows USB disk playback
2. Display: displays the working status of the playback programs.
3. Controller MP3
4. This button plays or pauses the USB/BT track
5. This button allows you to return to the previous USB/BT track
6. This button switches to the next USB/BT song
7. Create 6 different EQ effects for the song
8. This button allows you to play USB tracks repeatedly
9. To select between Wi-Fi, USB, and Bluetooth modes
10. LED indicators
11. PW: Red light when the amplifier is switched on
12. -32/-16: Flashes according to audio level
13. CLIP: Yellow light when the amplifier is in saturation
14. PROT: Red light in case of protection
15. Voice Priority button: press this button to start the automatic music mute function for MIC 1
16. MIC1 input Jack 6.35mm
17. MIC1 volume control
18. MIC2 or AUX1 volume control
19. MIC3 or AUX2 volume control
20. Bluetooth o Wi-Fi / USB (MP3)
21. Controls the low tone (BASS) of the amplifier output
22. controls the treble tone (TREBLE) of the amplifier output
23. MASTER volume control to collectively manage the sound level of all outputs
24. Power switch ON/OFF (POWER)

Back panel

1. BT / Wi-Fi antenna socket: for connecting the Bluetooth/Wi-Fi antenna (included)
2. WPS button: press for 6/8 seconds to activate the function
3. LAN port: allows you to use the network cable for connection when the Wi-Fi signal is weaker
4. AUX1 switch: switches between MIC2 and AUX1 inputs
5. AUX2 switch: switches between MIC3 and AUX2 inputs
6. LINE OUT: signal outputs via stereo RCA
7. AC power input: accepts a standard 230VCA
8. AC fuse holder: contains a 1A main fuse and a 1A reserve fuse
9. Loudspeaker output (COM, 4Ω, 8Ω, 70V, 100V): only one output may be used at a time, connecting more than one may damage the internal parts of the amplifier. Each 100V, 70V, 4Ω and 8Ω terminal must work with the COM (common) terminal / Salida de altavoz (COM, 4Ω, 8Ω, 70V, 100V)
10. MIC1 jack: accepts a balanced XLR connection
11. MIC2 jack: accepts a balanced XLR connection
12. AUX1 input: accepts an unbalanced 6.35 mm connection
13. MIC3 jack: accepts a balanced XLR connection
14. AUX2 input: accepts stereo RCA ‘L’ and ‘R’ connection, then internally converted to mono mode.

Connection illustration

1. USB Flash Memory
2. Desktop microphone
3. CD / DVD player
4. RCA jacks
5. Wi-Fi antenna
6. AC power supply
7. Fuse
   Fuse for overvoltage and short-circuit protection. If the amplifier suddenly shuts down and does not switch on, check the fuse and replace it if necessary.

Speaker connection

100V line output

This system is most commonly used in the PA system. Only use 100 V line loudspeakers with transformers. All loudspeakers are wired in parallel and the sum of their power must not exceed the rated output power of the amplifier. It is recommended not to load the amplifier beyond 70% of its maximum power.

1. COM and 100V terminals
2. Speakers with 100V transformer

70V line output

This system is common in the US, operating on the same principles as the 100V line except that at nominal output power the amplifier has 70V RMS at its output terminals.

1. COM and 70V terminals
2. Speakers with 70V transformer

Low impedance output 4Ω and 8Ω

This output allows the connection of low-impedance loudspeakers without transformers. When using two or more loudspeakers, ensure that they are connected in ‘series’ or ‘parallel’, or in ‘series + parallel’. The important thing is that the total impedance is 4Ω or 8Ω.

Connecting loudspeakers in parallel

1. COM and 4Ω terminals
2. Total impedance

Connecting loudspeakers in series and parallel combination

1. COM and 8Ω terminals
2. Total impedance

Bluetooth Operations

Note: the Bluetooth name of this amplifier is ‘BGM SYSTEM’.

To listen to music from a Bluetooth device on this amplifier, the Bluetooth device must first be paired with the amplifier. Once the Bluetooth device has been paired, it is not necessary to do so again the following times

1. Press the MODE button on the amplifier’s front panel to set the source input source to “Bluetooth”.
2. Activate Bluetooth settings on the mobile device.
3. Select this unit “BGM SYSTEM” when its name appears in the device list displayed on the mobile device screen. Pair with the mobile device near the unit (approx. 1 m). At the end of pairing, the name “BGM SYSTEM” is displayed in the mobile device’s pairing list.
4. Play music using any application on your mobile device. The next time the input source switches to Bluetooth, this amplifier automatically connects to the last connected Bluetooth device.

Wi-Fi and App Operations

• This amplifier uses ‘4STREAM’ as management app
• The default setting of the Service Set Identifier (SSID) amplifier is: ‘Linkplay_xxxx’.
• Connection: connect amplifier with speakers.
• Switching ON the Wi-Fi amplifier: Connect the power cable. When the unit turns on, the indicator light flashes red. To connect this device to Wi-Fi, you need to know the network credentials.

Technical Specifications

INFORMATION FOR THE USERS

At the end of its life, the device has to be separated from the other waste. Consign the device and all its components together to a center of electronical and electrotechnical waste recycling center, designated by your local authorities.

Frequently Asked Questions

Q: How do I reset the amplifier to factory settings?

A: To reset the amplifier to factory settings, locate the reset button on the back panel and press it for 10 seconds.

Q: Can I connect multiple devices via Bluetooth simultaneously?

A: The amplifier supports connecting one Bluetooth device at a time. Disconnect the current device before pairing a new one.

References

• Home Page - GBC Elettronica
• Home Page - GBC Elettronica

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>