YUHAO LSDC8723BK72 GrandGlow Indoor Black PlyWood Smart Ceiling Fan Instruction Manual

YUHAO LSDC8723BK72 GrandGlow Indoor Black PlyWood Smart Ceiling Fan

Product Information

Specifications

• Model No.: 8723
• Type : Ceiling Fan
• Remote Control : Yes
• Smart Control : Tuya Smart WiFi Remote Control
• Third-Party Voice Services Compatible

Product Usage Instructions

Safety Precautions

Before starting the installation process, please read and follow these safety precautions:

1. All electrical connections and disconnections should be performed by a qualified electrician.
2. Ensure all power is cut off before installing the fan.
3. Follow local laws, regulations, and national electrical codes for electrical connections.
4. Mount the fan at least 30 inches (76 cm) away from any obstruction.
5. The fan must be grounded to avoid any dangerous branching.
6. Do not connect the fan to dimmers, potentiometers, or light switches.
7. Avoid using the fan along with gas installations in the same room.
8. Stop the fan completely before changing its direction of rotation.

Installation

Step 1: Basic assembly of the fan

Follow the provided instructions to assemble the fan components.

Step 2: Ceiling bracket installation

Install the ceiling bracket securely and mount the fan onto it.

Step 3: Receiver and wiring installation

Connect the receiver and wire the fan according to the wiring manual.

Step 4: Install blades and lighting kit

Attach the fan blades and lighting kit as instructed.

Step 5: Switch on and test the fan

Turn on the fan and ensure it operates correctly.

Remote Control Operation

Use the provided remote control to operate the fan from a distance.

Tuya Smart WiFi Remote Control

For advanced control, connect the fan to the Tuya Smart WiFi Remote Control system.

Third-Party Voice Services

If desired, integrate the fan with third-party voice services for voice- activated control.

Troubleshooting

If you encounter any issues, refer to the troubleshooting section in the manual or visit www.pmwfan.com for assistance.

Balancing

If the fan is not balanced properly, use the provided blade balancing kit to correct any imbalance.

FAQ

• Q: Can I install this fan without a qualified electrician?
  • A : For safety reasons, it is recommended to have a qualified electrician perform all electrical connections and installations.
• Q: How do I change the direction of rotation for the fan?
  • A : Ensure the fan has come to a complete stop before changing its direction of rotation to prevent damage to the motor and control unit. Refer to the manual for specific instructions on changing the rotation direction.

THANK YOU
We appreciate the trust and confidence you have placed in us through the purchase of this ceiling fan.We strive to continually create quality products designed to enhance your home. Thank you for choosing us!

Safety Precautions

The information contained in the following pages has been prepared to ensure your maximum enjoyment of your fan Please remove the fuse or turn off the circuit breaker to cut off the power before installing the fan. Ensure all electrical connections are in compliance with local laws, regulations and national eletrical codes. If you are not familiar with electrical installation and wiring, please hire a qualified electrician or consult the wiring manual.

1. For your safety, all electrical connections and disconnections should be performed by a qualified electrician.
2. Any action performed for the electrical connection of the device must be carried out after ensuring that the general power supply is disconnected,by removing the corresponding fuse or disarming the protective switch in order to ensure total isolation of the power supply.
3. When deciding where to mount the fan, be sure that there is at least 30 inches(76 cm) of space between the fan and any wall or other obstruction that the fan blades could collide with. The greater this distance, the more effective the airflow produced.After the fan is mounted, be sure that the blades are no less than 7ft(2.1 m) above the ground.
4.  The anchor point for the fan must be able to support a weight of at least 100 pounds(45 kg). If mounting on a ceiling junction box, be sure that the fan is adequately supported to prevent loosening or turning.
5. The fan’s electrical connection must be “grounded” (the fan’s ground cable is connected to the installation’s grounding network) in order to avoid any branching that may be dangerous to people.
6. Do not connect the fan’s power supply to any dimmers, potentiometers, or light switches, as it will cause the fan to malfunction and/or will damage the motor. The fan must be directly connected to a properly protected installation circuit(magnetothermal differential switch with the adequate size for the fan’s consumption and technical specifications). Only use the fan’s control to turn it on or stop it.
7. It is recommended to not use these types of fans along with gas installations simultaneously in the same room.
8. The fan must be not be moving and must have come to a complete stop before changing its direction of rotation. This will prevent damage to its motor and to the control unit, when applicable.
9. Do not insert anything that could hit the fan’s blades into its pathway while it is moving, as this could cause damage to people, can damage the blades, and can offset the balance of the unit, causing vibrations and wobbling.
10. After installing the fan, ensure that all fastenings are secure and tightened in order to avoid any noise caused by loose elements.
11. Due to the fan’s movement, certain fastenings may become loose. Check all fastenings twice per year at a minimum in order to ensure that they are sufficiently tight. If necessary, they must be retightened.
12. The motor housing can be cleaned with a soft brush or a lint-free cloth to avoid scratching the surface. Clean the blades with a lint-free cloth. Important: Turn off the main power supply before starting any maintenance. Do not clean the fans with water or a damp cloth.

Note : The important warnings and instructions indicated in this manual are not guaranteed to cover all possible conditions and situations that may occur. It must be understood that common sense, precaution, and care are factors that cannot be included in all products. These factors can and must only be provided by the user who maintains and enjoys this fan.

Warranty

The manufacturer warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period of lifetime after the date of purchase by the original purchaser. The manufacturers also warrants that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after the date of purchase by the original purchaser. We agree to correct such defects without charge or at our option replace with a comparable or superior model if the product is returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All costs of removing and reinstalling the product are your responsibility. Damage to any part such as by accident, misuse, improper installation or by affixing any accessories, is not covered by this warranty. Because of varying climatic conditions this warranty does not cover any changes in brass finish, including rusting, pitting, corroding, tarnishing or peeling. Brass finishes of this type give the longest useful life when protected from varying weather conditions. A certain amount of “wobble” is normal and should not be considered a defect. Servicing performed by unauthorized persons shall render the warranty invalid. There is no other express warranty. We hereby disclaim any and all warranties, including but not limited to those of merchantability and  fitness for a particular purpose to the extent permitted by law. The duration of any implied warranty whichcannot be disclaimed is limited to the time period as specified in the express warranty. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you. The retailer shall not be liable for incidental, consequential, or special damages arising out of or in connection with product use or performance except as may otherwise be accorded by law. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion or limitation may not apply to you.

This warranty gives specific legal rights, and you may also have other rights which vary from state to state.
This warranty supersedes all prior warranties. Shipping costs for any return of product as part of a claim on the warranty must be paid by the customer.

Pre-Installation

Tools Needed

Installation kit

Blade balancing kit

Specification

Instruction

Step 1(Basic assembly of the fan)

1. Decompose drown rod.
2. Remove the screws which are used to install the blades.

Importance :If you are going to use a long down rod, follow these steps.

1. Connecting the Spare Power Cable
2. Connecting the Spare Safety rope
3. Route all the wires from the motor the down rod through.Fix the down rod to the coupling with bolt, washer, nut, tighten the nut,and tighten the firmly, then insert the clevis pin.Last tighten the two screws on the coupling.
4. Assemble the canopy, coupling cover,and hanging ball through the down rod. Then insert the fixing pin, push the hanging ball up, and fix it with screws.

Step 2 (Ceiling bracket installation and fan into the installed bracket.)

1. Turn off the fan power supply at the circuit breaker box and the wall switch.

2. Can be installed on <10º sloped roof. Choose the following installation methods according to the actual situation of the roof.

3. Snap the basically assembled fan into the installed bracket.

4. Make the wire connection in accordance to the wiring diagram provided.

5. Put the receiver into the bracket and tidy up wires. Rotate the canopy counter-clockwise until screw heads engage the key slots fully. Tighten the screws. Be careful not to damage or cut the wiring.

6. Fix blade to blade connector with screws.

7. Align the connected blade with the mounting hole, and then fix it with screws.

   • ② Remove the 3pc pre-installed screws from the motor assembly, and connect the terminal. Then fix the light kit to the main body with screws.

Remote Control Operation

Transmitter learning process

1. Insert the 2 pcs of batteries into the transmitter. for about 3 sec
2. Turn on the power supply to the fan. Within 10 sec, press and hold the “1” and “2” buttons for about 3 sec. Once the receiver has detected the frequency, the receiver will “Beep Beep” twice. The programming process is completed and fan is ready to use.
   • NOTE : The remote control device has already been code-matched when it leaves the factory.If the fan is not responding to the transmitter, repeat the transmitter learning process.
   • ABOUT THE MEMORY FUNCTION OF LIGHTS ： Please wait for more than 3-5 seconds keep this color that you need at first, and then turn off wait for at least 10 seconds turn on again. This light color would be your need.
   • IMPORTANT : The fan can only operate normally after all blades are installed. If the fan is turned on without installing the blades, the receiver will detect that the fan speed is too fast and the fan will automatically stop.

Tuya Smart WiFi Remote Control

• 1-Search and download “Tuya Smart” in the App Store, Google play or scan QR.
• 2- Install and open the app.
• 3.1 Open your App account.
• 3.2 Create a new account:
• input your mobile number or email address.
• click to get the verification code (check your mailbox).
• input the verification code.
• set login password.
•  accept the permissions.
• you have your account created.
• 4- Turn on Bluetooth and WiFi, and connect WiFi (Note: WiFi can only use 2.4G router)
• 5- Link the ceiling fan: Open the App, then turn on the power supply of the fan controller and press and hold the “6h” button of the remote control handle for about 5 seconds within 10 seconds after the fan is powered on. At this time, click Add device in the App main interface, the light will flash and the connection icon of the fan will appear on the App interface. Next, click the “Add device” button. Then you can enter the mobile phone control interface to control the fan (Note: When Bluetooth matches, the fan motor cannot be in working state).

NOTES

1. Please check whether the WIFI account and password information are correct.
2. Reducing the distance between mobile phone, router and an receiver can connect more faster, otherwise, it may cause connection failure.

Third-Party Voice Servives

Troubleshooting

WARNING : Make sure the power is off at the electrical panel box before you attempt any repairs.

Balancing – Wobbling problems during fan operation

Ifthe fan body wobbles during its operation, this is not a sign of malfunctioning (even if it wobbles a few centimeters). To reduce wobbling, you can turn off the fan,and:

1. Check that all blades are properly fastened by tightening their screws.
2. Check the distance between each blade and the ceiling. Measurements to the ceiling can be carried out as shown in the following diagram. If variations exist and you have already correctly tightened the screws, check that all blades have the same shape. If any of them have a shape that is visibly different, this may be causing an imbalance during fan operation.

If you have completed the previous steps and the wobbling has not resolved, you should apply dynamic balancing with the kit provided, as explained below:

1. Turn the fan on to the highest speed so that the greatest amount of wobbling is produced.
2. Turn off the fan. Select a blade and place a clip on it (see diagram) halfway between the fastening and the far edge of the blade.
3. Turn on the fan and check whether the wobbling has improved or gotten worse. Turn it off once again and if the wobbling has not improved, place the clip on another blade. Repeat this process and determine on which blade it improves the wobbling.
4. Leave the clip on the blade that produces the best results. Move the clip forward or backward on this blade until finding the position that offers the best results.
5. Afterward, remove the clip and place one of the weights on the upper part of the center line of the blade at the position where the clip was located.

Questions, problems, missing parts? Before returning to the store, visit www.pmwfan.com for further assistance.

Retain this manual for future use.

Visit www.pmwfan.com for further assistance.

References

• YUHAO

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>