JYED CYTVS07 Electric Fireplace TV Stand Instruction Manual

YED CYTVS07 Electric Fireplace TV Stand

Specifications:

• Model : CYTVS07
• Dimensions : x43, x42, x8
• Weight : x24
• Power : x2
• Colour : Black

Product Usage Instructions:

Assembly:

Follow the provided instructions to assemble the product components in the correct order. Make sure all parts are securely connected before use.

Power On/Off :

Locate the power button on the product and press it to turn the electric fireplace/heater on or off. Ensure the unit is plugged into a power source.

Temperature Control :

Adjust the temperature settings using the controls provided on the product. Set the desired temperature for optimal heating performance.

Care and Maintenance:

Refer to Page 15 of the manual for detailed instructions on how to care for and maintain your electric fireplace/heater. Regular cleaning and upkeep will ensure longevity.

FAQ:

• Q : What should I do if I encounter missing parts?
• A : Before returning the product, contact our customer service at 800-385-0608 or email [email protected] for assistance regarding missing parts.
• Q : How do I adjust the flame settings on the electric fi place?
• A : The flame settings can usually be adjusted using the controls provided on the unit. Refer to the user manual for specific instructions on adjusting flame settings.
• Q : Can this product be used as a primary heating source?
• A : While the electric fireplace/heater can provide supplemental heat to a room, it is not recommended as a primary heating source. It is ideal for adding warmth and ambience to your space.

PARTS

HARDWARE

INSTALLATION INSTRUCTION

USE AND CARE GUIDE

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

THANK YOU
We appreciate the trust and confidence you have placed this electric fireplace/heater. We strive to continually create quality products designed to enhance vour home. Thank you for choosing!

Safety Information

IMPORTANT SAFETY INFORMATION PLEASE READ ALL OF THE INFORMATION IN THIS OPERATING MANUAL, INCLUDING ALL SAFETY, OPERATING, AND MAINTENANCE INFORMATION. TO AVOID THE POTENTIAL RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, USERS SHOULD FOLLOW THE DIRECTIONS AND WARNINGS IN THIS MANUAL.

1. Read all instructions before using this heater.
2. Do not use this heater outdoors.
3. This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate the heater where it may fall into a bathtub or other water container.
4. Do not run the power cord under the carpeting. Do not cover the power cord with throw rugs, runners, or the like. Arrange the power cord away from traffic areas and where it will not be tripped over.
5. To disconnect the heater, turn the controls to off, then remove the plug from the outlet.
6. Connect to properly grounded outlets only. Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
7. To prevent a possible fire, do not block firebox air intakes or the exhaust in any manner. Do not operate the firebox on soft surfaces, like a bed, where openings may become blocked.
8. There is a thermostat limiter inside the heater. When the inner temperature overheats or abnormal heating occurs, the thermostat protective device cuts off the power supply to avoid fireplace damage or risk of fire.
9. Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause a fire. electrical shock, or injury to persons.

WARNING

DEATH OR SERIOUS INJURY MAY OCCUR WHEN CHILDREN CLIMB ON AUDIO AND/OR VIDEO EQUIPMENT FURNITURE. A REMOTE CONTROL OR TOYS PLACED ON THE FURNISHING MAY ENCOURAGE A CHILD TO CLIMB ON THE FURNISHING AND AS A RESULT THE FURNISHING MAY TIP OVER ON TO THE CHILD.

WARNING RELOCATING AUDIO AND/OR VIDEO EQUIPMENT TO FURNITURE NOT SPECIFICALLY DESIGNED TO SUPPORT AUDIO AND/OR VIDEO EQUIPMENT MAY RESULT IN DEATH OR SERIOUS INJURY DUE TO THE FURNISHING COLLAPSING OR OVER TURNING ONTO A CHIL

USE AND CARE

1. To clean, use a soft cloth slightly dampened with water.
2. Do not use abrasive cleaners or spray liquids.
3. Using solvents of any kind on your furniture may damage your furniture’s finish.
4. Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing.
5. Stains or marks from crayons or ink markers will be difficult to remove.
6. Do not climb or step on the stand.
7. Periodically check that all fasteners are tightened.

WARNING:

There are no user-serviceable parts inside the fireplace/heater. If the unit appears to malfunction, turn the unit off unplug the unit from the wall immediately, and contact the Customer.

• This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this heater. Keep combustible material, such as furniture, pillows, bedding, papers, clothes and curtains at least 3 ft. (0.9 meters) from the front of the heater and keep them away from the sides and rear.
• Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
• Always unplug the heater when not in use.
• Do not operate any heater with a damaged cord or plug or after the heater malfunctions, or has been dropped or damaged in any manner. Return the heater to an authorized service facility for examination, electrical or mechanical adjustment, or repair.
• Do not insert or allow foreign objects to enter any ventilation or exhaust openings as this may cause an electric shock or fire, or damage the heater. A heater has hot and arching or sparking parts inside. Do not use in areas where gasoline, paint, or flammable liquids are used or stored.

CAUTION: While the heater is in use, the top centre of the fireplace can get hot to the touch, and may cause serious injury or burns. Always supervise small children around the fireplace/heater. Do not place any cloth or decorations over the heater outlet of the fireplace, or otherwise obstruct the heater outlet of the fireplace, as this may cause a fire and serious injury may result.

GROUNDING INSTRUCTIONS

DANGER: Improper connection of the equipment­grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product. H it will not fit the outlet, have a proper outlet installed by a qualified electrician.

This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment­grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded under all local codes and ordinances. This heater is for use on 120-volt circuits and has a grounded plug. An adapter is available from your local electronics store or online supplier for connecting three-blade grounding-type plugs to two-slot receptacles. The green grounding lug extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box. The adapter should not be used if a three-slot grounded receptacle is available.

WARRANTY

We are confident that you will be delighted with this purchase. Should this product be defective in workmanship or materials, or fail under normal use, we will repair or replace it for a period of up to one (1) year from date of purchase.
This warranty gives you specific rights and you may also have other rights which vary from state to state.

Pre-installation

ELECTRICAL SPECIFICATIONS

• Voltage: 120 VAC, 60 Hz
• Watts: 1400 Watts

TOOLS REQUIRED HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

PACKAGE CONTENT

CAUTION: This insert has front panel made of GLASS! ALWAYS use extreme caution when handling glass. Failure to do so could result in personal injury or property damage.

Assembly

Attaching the metal trims

• Fasten the top trim (X) to the top of the fireplace insert (W) with two screws (18). Make sure that the right angle side points towards the front of the unit.
• Align and attach two side trims (Y} to both sides of the fireplace insert (W) respectively with the right angle side facing the front of the unit, using two screws (18) per trim.

Installing the fireplace insert

• Carefully set the fireplace insert (W) into the back of the mantel and centre it in the opening. Use care not to scratch the wood. Check the alignment, and then attach the fireplace insert (W) to the mantel by inserting the screws (18) through the drilled holes on the trims (X and Y} and securely screw into place using a Phillips screwdriver.

NOTE: DO NOT attempt to Install the Insert from the front of the mantel – It will not flt.

Operation

Identifying the control panel

• The control panel is located on the top right corner of the fireplace/heater unit.
• The control panel contains the main power (1), flames control (2) and heater control (3).

Using the main power button

• Press the power button (1} to turn the fireplace/heater unit on and off. Press the power button (1) once to turn the unit on. Press again to turn the unit off.

Using the flame control

• Press the flame button (2) to set the flames for different levels of flame height. You can control the flame height as the table below:

• When the heater function turns on, the flame level will cycle through the 3 different level settings continuously.

• If the flame is off when the unit is turned off by the main power button, the flames will come on in highest mode when you turn the heater on.

Using the heater control

• Press the heater button (3) to turn on or off the heat function. There is no speed setting for the heater blower. If you turn off the heater by the main power button (1), the unit will hold the setting in the memory. When the power is turned back on, the heater will turn on at the same setting.
• When the flame function turns on, press the heater button (3) once to turn the heater on. Press again to turn the heater off.
• When the flame function turns off, the flames will come on in highest mode when the unit is turned on heater button (3).

Using the Remote Control

Installing the battery

The battery is supplied with the remote control. The first thing to do with the remote control is to remove the plastic sheet insulated the battery. For replacement battery, use lithium-based CR2025 battery. Please follow the sequence below to replace the battery.

• Insert the battery with the button side into the battery bracket, making sure the battery is firmly seated.
• Press the battery bracket into the remote control, making sure it snaps into position.
• Turn the remote over and aim it towards the fireplace/heater unit.
• Press the power button on the upper portion, and see if the flames on the fireplace/heater turn on or off.
• If nothing appears to happen, check to make sure the battery is installed correctly, and try again.

WARNING:

Do not ingest batteries.

1.  Non-rechargeable batteries are not to be recharged.
2. Batteries are to be inserted with the correct polarity.
3. Exhausted batteries are to be removed from the product.
4. Always purchase the correct size and grade of battery most suitable for the intended use.
5. Replace all batteries of a set at the same time.
6. Clean the battery contacts and also those of the device prior to battery installation.
7. Remove batteries from equipment when not used for an extended period of time.

NOTE:
Battery disposal Please always dispose of batteries at a suitable recvelina noint.

Using the remote control

• The operation of the remote control buttons work the same as the buttons on the front panel of the fireplace/heater. Review the Operation section for more information on the functionality of these buttons.

Care and Maintenance

• WARNING : Always disconnect from the power supply before cleaning the heater. First turn off the main power. Then remove the electrlcal plug from the wall outlet.
• WARNING: Do not use this fireplace Insert If any part of It has been under water. Immediately call a quallfled service technician to Inspect the firebox and replace any part of the electrlcal system which has been under water.

The blower motor and flame motor are pre-lubricated for a durable using time and need no further lubrication or maintenance. To remove any accumulation of dust or debris, the soft brush attachment of a vacuum cleaner should occasionally be used to clean the outlet grille of the fan heater.

• Use a soft, clean cloth that will not scratch the surface when dusting.
• Use a clean soft cloth dampened with warm water to clean the fireplace surface. DO NOT use household or abrasive cleaners, as these products may damage the surface.
• When cleaning the glass viewing screen use a non-abrasive damp cloth with liquid cleaner or soft soap if necessary; DO NOT use cleaning powders or any other substance with abrasives since these substances will scratch glass.
• Under no circumstances should this product be operated with a broken or chipped glass panel.
• Do not strike or slam the glass.
• In the event that your appliance is stained or otherwise damaged during use, we recommend that you call a professional to it.
• When not in use please unplug the cord from the outlet to prevent any damage or accidents.

Troubleshooting

standard 120 V

outlet.

□     Press the power button on the control panel.

The unit is on, but there is no flame effect.| □    Open the back panels to check if the flame spindle has

fallen off from the spindle motor.

There is a visible flame effect, but the heater does not continue to blow warm air after repeatedly turning on the heater.| □    Turn on/off the heater button several times to make sure

it is in the “ON” position.

The heater does not work, but the power and heater switches are in the “ON” position.| □    Turn all switches to the “OFF” position and unplug the

unit from the wall outlet for 5 minutes. After 5 minutes plug the unit back into the wall outlet, and operate as normal. Make sure that no objects are blocking the air vents on the top and on the front of your fireplace•

Remote control is not working.| □     Change the remote battery.

□     Operate remote transmitter at a slow measured pace.

Press the remote control buttons with an even motion and gentle pressure.

□     Repeatedly pressing buttons in rapid succession may cause the transmitter to malfunction.

□     Stand closer to your fireplace.

□     Remove objects that may block your remote control’s ability to communicate with your fireplace.

Questions, problems, missing parts? Before returning the product, call our customer service 9 a.m.- 5 p.m., PST, Monday-Friday

CONTACT

• 800-385-0608
•  email us at [email protected] for assistance.

References

• Way | Find & Reserve Parking, Auto Insurance, Car Wash & More

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>