AURIS-BT Around Ear Bluetooth Wireless Headphones User Guide
- June 17, 2024
- AURIS
Table of Contents
AROUND EAR BLUETOOTH®
WIRELESS HEADPHONES
QUICK START GUIDE
DESCRIPTION
-
Wireless connection via Bluetooth®5.3 allows you to enjoy sound with freedom of movement.10 m transmission distance
-
With microphone for hands-free calling
-
It has a 3.5 mm jack input for use with cable (does not consume battery)
-
Rechargeable Li-ion battery, 400 mAh 3.7V
Battery life: Up to 12 h*
Charging time: 2-3 h -
Battery life at 50% of the volume. Depending on the type of music and volume, the battery life may be reduced.
CONTROLS AND CONNECTIONS
-
Controls:****
| PLAYER| Short press: decrease/increase music volume.
Long press: previous/next song.
---|---|---
CALL| Short press: decrease/increase microphone volume.
| PLAYER| Short press: starts/pauses music.
2x short press: last number redial.
Long press: starts phone assistant.
CALL| Short press: accept/end call.
2x Short press: reject incoming call or activate AURIS-BT headphones/ phone speakers.
Long press: reject an incoming call. -
Audio cable input for use without bluetooth.
-
Battery recharge USB port.
-
Status LED indicator.
Indicator| Status
---|---
Off| Bluetooth off (switch off or audio cable connected).
Fixed red| Charging battery.
Fixed blue| Battery charged 100%.
Blue flashing fast| Headphones ready to pair to an audio device via Bluetooth.
Blue flashing slow| Headphones paired with an audio device via Bluetooth. -
Bluetooth power switch.
NOTE : the audio cable must be disconnected. -
Microphone for recording or calls.
OPERATION
BLUETOOTH CONNECTION
-
Make sure the headphones have a charged battery, turn on the power switch and the indicator light will start flashing red-blue.
-
Activate Bluetooth on your audio device (smartphone, tablet, etc.) and search for the AURIS device.
Wait for a few seconds until both devices are paired. The indicator light will flash blue once they have been successfully paired. NOTE: if your device requests a password enter 0000. -
Start playing music from your device. For the operation of the buttons for the player and calls, see CONTROLS AND CONNECTIONS.
NOTE : if no device is paired after 5 minutes, the headphones will go into Standby state reducing battery consumption. Turn the headphones off and on again to activate them again.
CABLE CONNECTIO
-
Connect one end of the supplied stereo audio cable to the headphones. The headphones will automatically turn off the bluetooth function and will not consume battery power while the cable is connected.
NOTE : FONESTAR recommends ensuring that the power button is in the off position to avoid unintentional battery consumption if you disconnect the cable when you are finished using the device. -
Connect the other end of the cable to your audio player (smartphone, tablet, PC, TV, etc) and start playback.
SIMPLIFIED EU DECLARATION OF CONFORMITY
FONESTAR SISTEMAS S.A. hereby declares that the Bluetooth® wireless headphones
AURIS-BT complies with the Directive 2014/53/EU.
The complete text of the EU Declaration of Conformity is available at the
following internet address: fonestar.com/AURIS-BT