Aphyni LA-RC24W12A Smart Ceiling LED Lights User Manual
- June 17, 2024
- Aphyni
Table of Contents
Aphyni LA-RC24W12A Smart Ceiling LED Lights
Parameters
Product Specification
Unpacking List
Installation Guide
LED CEILING LIGHT
- Turn off the power;
- Unscrew the mounting plate from the light;
- Mark the holes on the ceiling where the mounting plate will be fixed, and then drill holes at the marks;
- Secure the mounting plate with provided screws;
- Use the screw caps to connect the AC input cable to the power supply;
- Align the light with the mounting plate slot and rotate the light clockwise onto it to complete the installation.
- Remote Control Instructions
LED CEILING LIGHT
- Turn off the power;
- Unscrew the mounting plate from the light;
- Mark the holes on the ceiling where the mounting plate will be fixed, and then drill holes at the marks;
- Secure the mounting plate with provided screws;
- Use the screw caps to connect the AC input cable to the power supply;
- Align the light with the mounting plate slot and rotate the light clockwise onto it to complete the installation.
Remote Control Instructions
TURN ON / PAIR: Single click to turn on the main light; hold down to pair
with the ceiling light.
TURN OFF / UNPAIR: Single click to turn off the main light; hold down to
unpair with the ceiling light.
BRIGHTNESS+: Increase the Main Light or RGB Backlight brightness by
clicking, up to 100%.
BRIGHTNESS-: Reduce the Main Light or RGB Backlight brightness by
clicking, down to 5%.
K+: Increase the Main Light color temperature by clicking, up to 6000K.
K-: Reduce the Main Light color temperature by clicking, down to 2700K.
FIXED COLOR TEMPERATURE: 3000K/4500K/6000K fixed color temperature
switch.
BACKLIGHT SWITCH: Switch between 7 colours with a click; the backlight
can also be turned on with a single click, but cannot be turned off.
DISCO MODE: Three disco modes, corresponding to three speeds fast, medium
and slow. (Note: Can be used at the same time as the Main Light.)
BACKLIGHT ON/OFF: Single click to turn on/off RGB Backlight.
100% BRIGHTNESS: Click to reach 100% brightness with no change in colour
temperature.
NIGHT LIGHT MODE: Click to use the night light mode, maintaining 5%
brightness, 3000K colour temperature.
Remote Control Pairing
NOTE
The ceiling light has been paired before shipment, only need to connect the
power Supply can be used directly. If the remote control does not work, please
re-pair it.
- After installation, turn on the power, and the ceiling light works at a colour temperature of 3000K, 100% brightness.
- within 2 seconds after the ceiling light is on, hold down the “TURN ON” until the Main Light flashes twice and the pairing is successful.
- If you want to unpair the remote control, hold down the “TURN OFF” when the ceiling light is on until the Main Light flashes twice, and the remote is unpaired successfully.
- If you want to control multiple ceiling lights with one remote control, you need to turn on these ceiling lights at the same time and hold down the “TURN ON” within 2 seconds until these Main Lights blink twice to finish.
Note: The remote control can be used at a distance of no more than 20 meters (65.6 feet).
APP Download
Search the “LampSmart Pro” on the App Store or Google Play, or scan the QR
code below to download the application.
Download Web: http://www.jasonghost.com/lampsmartpro/
APP Control Instructions
- Colour Temperature Adjustment Knob: 2700K-6000K free to adjust the color temperature of the Main Light.
- Brightness Regulator: 5%-100% free to adjust the brightness of the Main Light.
- Fixed color temperature 6000K, 100% maximum brightness.
- Fixed color temperature 3000K, 100% maximum brightness.
- Fixed color temperature 4500K, 100% maximum brightness.
- Night Light Mode: Click to use the night light mode, maintaining 5% brightness, 3000K color temperature.
- Auxiliary Light: common mode in Japan, not applicable to US.
- Timer: adjust the ceiling light off time. Timer icon lights up (green) after a successful setting, timer icon returns to default after the timer works.
- Disco Mode: click once, the icon lights up (green), start one of the speeds of disco mode, click again disco mode off, and the icon returns to default; click again, start another speed of disco mode, and so on.
- Disco mode has three speeds: Fast/Medium/Slow.
- Pair: after turning on the power, click once within 2 seconds, the Main Light flashes twice that the pairing is successful.
- RGB Color Palette: freely choose the color of RGB Backlight.
- ON/OFF: Use the phone to switch the light on/off.
- Use voice input command, currently only Chinese and English are supported.
Note: Due to technical reasons, the APP can’t turn on/off the Main Light and RGB Backlight alone for the time being, but the remote control is completely possible.
LampSmart Pro App Pairing
- Download the “LampSmart Pro” APP and click to open it.
- Open Bluetooth, click “+”, enter the device name and confirm to add the device. Click the added device.
- Then turn on the power, and click the “Pair” once within 2 seconds, the Main Light flashes twice and the pairing is successful.
Note: When pairing the ceiling light with the APP, you only need to open Bluetooth, no need open GPS, and even no need to connect to the network, which solves the problem of the ceiling light is far from the network source which makes it impossible to connect.
APP Control Share
Click the menu icon on the top left corner of APP, click “Scan QR Code” to scan other QR codes to get the corresponding control right of the ceiling light. Similarly, click “My QR Code” to share the control right of your ceiling light to others.
Wall Switch Control
Using the wall switch to quickly turn on/off the light can switch the Main
Light 4 modes. The 4 modes are:
- 3000K Color Temperature + 100% Brightness
- 4500K Color Temperature + 100% Brightness
- 6000K Color Temperature + 100% Brightness
- Night Light Mode
Note
The time interval between on/off lights should not be too long. If the time
interval is longer than 3 seconds, the main light will work with the setting
when ON due to the memory function.
Memory Function
- After setting the Main Light, keep it on for more than 3 seconds, then use the wall switch or remote to turn it off and turn it on again, the Main Light still works with the previous setting.
- The RGB Backlight does not need to stay on for more than 3 seconds to complete the “memory”, after setting the colour by “BACKLIGHT SWITCH”, click “BACKLIGHT ON/OFF” to turn off the RGB Backlight, no need to wait for another click to turn on,
Disco Mode
After clicking “DISCO MODE”, the RGB Backlight will enter disco mode, with a
total of three speeds: Fast/Medium/Slow.
Note: Disco mode can work with the Main Light at the same time, or work
alone after the Main Light is turned off.
Warning
- When the input voltage exceeds the standard range, it may cause the ceiling light to malfunction. Be sure to use it at the correct input voltage.
- The ceiling light is not waterproof, please use it only in a dry location.
- Please keep the ceiling light away from any corrosive substances. When cleaning, please use a dry cloth.
- Using ceiling lights at high temperatures will reduce its lifespan.
- Make sure the power is disconnected before starting the installation process.
- Due to the high installation position of the ceiling light, please ensure personal safety when cleaning and installing.
- During wiring, the input wire (LN) must be inserted into the bottom of the insulated screw cap. For safety reasons, it prevents the internal wires from being exposed.
- For non-user replaceable light sources, the light source contained in this ceiling light shall only be replaced by the manufacturer or its service agent or similarly qualified person.
- Products must be sold by professionals.
3-year Warranty
The 3-year warranty on our products applies only to all operations that comply with the instructions. The warranty does not cover the following!
- Any altered, amended, deleted or altered purchase label or instructions.
- Failure due to human damage, misconnection or misuse.
- Natural environment (such as lightning, flooding, etc.) caused by rather than the damage of the product itself.
- The product has been privately disassembled:
- Adverse consequences (e.g. moisture, corrosion) caused by failure to use, maintain or store the product under the product instructions.
After-sales Service
Please contact us if you have any problems during installation and usage.
Aphyni Global After-sales Email:
inquire@ainexter.com.We will do our best to
help you solve your problem.
Correct Disposal of This Product
This mark indicates that the product should not be disposed of with other
household waste. To prevent unnecessary harm to the environment or human
health from uncontrolled waste disposal, the product should be recycled
responsibly to promote sustainable use of material resources.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>