WL17064 Skit Design Light User Manual
- June 17, 2024
- Skit
Table of Contents
inspire
WL17064 Skit Design Light
EAN CODE :
3276000459057, 3276000459064
3276000459125, 3276000459033
Assembly – Use – Maintenance Manual
5 YEAR GUARANTEE
The fittings included in the kit are suitable for mounting on concrete,stone
or brick.
Assembly Use Legal & Safety Instructions
Warning symbols
| Read the instructions carefully.
---|---
|
Safety Class II. This lamp is doubly insulated and may not be wire to a
protective conductor
General Safety Instructions
Read this instruction manual thoroughly before using the appliance and save it
for future reference and if necessary pass the instruction manual on to a
third party.
WARNING: When using electrical appliance, basic safety precautions should
always be followed to reduce the risk of fire, electrical shock and personal
injury.
-
General
Keep device out of reach of children and unauthorised persons.
Check if the electrical specifications of this luminaire are compatible with your installation.
WARNNG: The power supply must be deactivated prior to assembly, maintenance, exchanging the bulb or deaning processes. Remove the fuse or switch the fuse to OFF and secure from reactivation.
Care must be taken before drilling fixing holes to avoid any existing wiring or pipework that may be concealed.
For indoor use only.
After switch of 5-10 minutes , exchange the bulb when the bulbs have been cooled down.
Do not use with halogen bulb. -
Electrical safety
Luminaire should be installed by authorized electrician only according to national wiring rules.
Warning: if the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
Specific Safety Rules
Warning: the installation shall be carried out by an electrician or electrically skilled person such that the basic insulated fixed wiring have to be prepared with supplementary insulation before the luminaire can be connected. When the input wire is connected into the terminal of power source, the connection must be double insulation.
Environmental protection
CAUTION!
Electrical products must not be thrown out with domestic waste. They must be
taken to a communal collecting point for environmentally friendly disposal in
accordance with local regulations. Contact your local authorities or stockist
for advice on recycling.
The packaging material is recyclable. Dispose of the packaging in an
environmentally friendly manner and make it available for the recyclable
material collection-service.
Appliance Specifications
TECHNICAL CHARACTERISTICS
Rated voltage| 230V
Rated frequency| 50Hz
Rated wattage| Max.15W
Bulb rating| E14,1x15W
Ambient Temperature| 25°C
Protection| II
IP number| IP 20
Maintenance / Cleaning
Disconnect from mains before maintenance or cleaning.
Repairs should only be carried out by qualified persons and using genuine
spare parts. Inappropriate repairing could cause significant danger.
Always use bulbs according to specifications listed in this manual.
WARNING: The use of any accessory not specified in this manual may
present a risk of personal injury.
Others (Service, Repairing, Guarantee, etc.)
Have your product repaired by a qualified person.
This electric product is in accordance with the relevant safety requirements.
Repairs should only be carried out by qualified persons using original spare
parts, otherwise This may result in considerable danger to the user.
Please contact the store which you bought the product for after sale services
if any.
- Garantie 5 ans
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>