FLEXTAIL OP07-NR02 Max Boat Pump User Guide
- June 17, 2024
- FLEXTAIL
Table of Contents
The Guide of
MAX BOAT PUMP
– OP07-NR02 –
Fuction demonstration
Zozzle
Weigh | 4559±10 |
---|---|
Dimension | 6895128mm |
Deflation pressure | 10kPa |
Inflation pressure | 12kPa (1.7psi) |
Inflation speed | 142L/min |
Rated power | 72W |
Rated current | 6A |
Endurance | 25min |
Battery capacity | 2500mAh |
Package content | MAX BOAT PUMP/ Type-C cable /Manual / Storage bag / Nozzles |
MAX BOAT PUMP / Type-C
Certification| CE , FCC, Ro HS
Operation instructions
Operation instruction for switch with the function of preventing mistakenly
touching
To prevent unintended activation, the switch adopts an anti-mistakenly
touching design, please read the following instructions carefully before use.
- First press the unlock button.
- Then toggle the switch button.
Operation interface
-
Display area
O.lpsi/l.OkPa-l.7psi/12.0kPa/ The default display is 1.0 psi. The air pressure display range is (1.0kPa)-1.7psi(12.0kPa). -
“+”
Short press to ncrease with 0.1 psi (1 kpa), and long press to ncrease with 0.1 psi (1 kpa) continuously -
“-”
Short press to decrease with 0.1psi (1 kpa), and long press to decrease with 0.1 psi (1 kpa) continuously. -
Switch, switch the pressure units kpa and psi.
-
ON/OFF/
Start/Stop, Start or stop the pump core.
Storage bin for exclusive nozzles
Note: There are two exclusive air nozzles in the storage bin by default.
There may be abnormal sounds caused by mproper fitting when storing other air
nozzles.
- Open the storage bin.
- Pile the two air nozzles and put them into the storage bin.
- Close the storage bin.
Inflate the inflatable boat
- Choose a suitable nozzle and install t on the inflation port of the pump.
- Turn on the switch with the function of preventing mistakenly touching.
- Set the desired air pressure.
- Connect to the air valve of the inflatable boat. Press the Start/Stop button to inflate. The pump will be off automatically when t reaches the preset air pressure.
Deflate the inflatable boat
- Choose a suitable nozzle and install it on the deflation port of the pump.
- Turn on the switch with the function of preventing mistakenly touching.
- Connect to the air valve of the inflatable boat. Press the Start/Stop button to deflate. Please press the Start/Stop button to turn off the pump after finishing deflating.
Power indicator schematic
Low battery indication When the red light is on, it means the pump needs
to be charged. Charging indication >O.lpsi (0.69kpa) <l.4psi (9.7kpa)
Product introduction
MAX BOAT PUMP Pump for inflatable
Product (As shown in the drawing figures)
Storage and transportation(As shown in the drawing figures)
Operation(As shown in the drawing figures)
Care and maintenance (As shown in the drawing figures)
Troubleshooting
If the product does not work:
- Please check if there is water or other liquid on the surface.
- Check whether the fan blade is stuck.
- Press the switch repeatedly.
- Other questions? Please contact FLEXTAIL Technology agents or contact us: service@flextailgear.com
Reserve piece
There are no user-replacement parts for this product other than the nozzles
and charging cable.
Warnings
- Do not use it for more than 10 minutes. Begin the next work after 5 minutes.
- Do not put it under the water for a long time.
- Keep the inflation port or the deflation port clean .
- Do not put your finger into the inflation port or deflation port when the pump is working.
- Do not watch the inflation port or deflation port when the pump is working.
- Children under the age of 12 need to have adults’ supervision when using the pump.
- Please check whether the air pump is functioning properly before use.
FLEXTAILGEAR shall not be liable for any direct, indirect, incidental or other
damages arising out of or caused by the use of the products. Users are
responsible for their own actions and all the consequences that result from
these actions.
Warranty terms
For the defects in material and workmanship of the product, the original
retail purchaser of this product will be provided a warranty service for one
year based on purchase data by FLEX TAILGEAR.
If the Buyer discovers a covered defect, the buyer should return the product
to the place of purchase. If this is not available, please return the product
to the address specified by us. We will repair or replace the modified product
at our discretion following the warranty terms.
We assume the above responsibilities in accordance with the essential
guarantee terms during the warranty period. After the expiration of the
warranty, the service will no longer be provided.
We reserve the right to require proof of purchase for all warranty
applications.
Warranties Exclusions
We do not warranty products against normal wear and tear, unauthorized modifications or alternations, improper use, improper maintenance, accident, misuse, negligence, damage, or if the Product is used for a purpose for which it was not designed. This warranty gives you specific rights, and you may also have other rights which vary from state to state. Except for expressly stated in this warranty, we shall not be liable for direct, indirect, incidental, or other types of damages arising out of, or resulting from the use of Product. This warranty is in lieu of all other warranties, expressed or implied, including, but not limited to, implied warranties of merchantability or fitness for a particular purpose(some states do not allow the exclusion or limitation of incidental or consequential damages or allow limitations on the duration of an implied warranty, so the above exclusions may not apply to you.)