tuya RT1 Touch Wheel RF Remote Controller User Guide
- June 17, 2024
- Tuya
Table of Contents
tuya RT1 Touch Wheel RF Remote Controller
Product Information
Specifications
- Model No.: RT1/RT6/RT8
- Dimensions:
- RT1: 53.00 mm x 17.50 mm
- RT6: 122.00 mm x 53.50 mm
- Zone Dimming: 1, 4, 8 zones
- Wireless Remote Range: 30m
- Battery: AAAx2
- Magnet on back for easy attachment
Product Usage Instructions
Mechanical Structures and Installations
The RT1/RT6/RT8 Touch Wheel RF Remote Controller comes with different zone dimming capabilities and a touch color wheel. It operates wirelessly with a range of 30m and is powered by AAAx2 batteries. The back of the remote features a magnet for easy attachment.
Operation
When turning on the light, the indicator will display blue, and when turning off the light, it will display red. Touching the color wheel will display the selected color. If there is no touch or press key operation after a few seconds, the touch wheel will enter sleep state to extend battery life.
Match Remote Control
There are two ways to match or delete remotes:
- Using the Controller’s Match Key: Short press match key and immediately press on/off key or zone key of the remote. LED indicator fast flash indicates successful match or delete.
- Power Restart Match: Switch off and on the power, then press on/off key or zone key on the remote multiple times for matching or deleting remotes.
Key Functions – RT1 1 Zone Dimming Remote
- S1: Turn on/off light.
- S2: Touch to change brightness.
- S3: Adjust brightness (short press for 10 levels, long press for continuous adjustment).
- S4: Small night brightness (10%).
- 30s: Turn off light after 30s (long press for 60s).
- Brightness Levels: 25%, 50%, 75%, 100%.
FAQ
How do I replace the batteries in the remote controller?
To replace the batteries, simply open the battery compartment on the back of the remote and insert two AAA batteries following the correct polarity.
What should I do if the remote control is not responding?
If the remote control is not responding, first check the battery level and replace if necessary. You can also try re-matching the remote control with the receiver following the provided instructions.
Model
1,4 ,8 zone dimming/Touch color wheel/Wireless remote 30m distance/AAAx2
battery/Magnet stuck fix
Features
- Apply to single-color LED controller.
- Ultra sensitive color a ● djustment touch wheel.
- Each remote can match one or more receiver.
- AAAx2 battery powered.
- Operate with LED indicator light.
- Magnet on the back which can be stuck on back holder
Technical Parameters
Input and Output
Output signal| RF(2.4GHz)
Working voltage| 3VDC(AAAx2)
Working current| ＜5mA
Standby current| ＜10μA
Standby time| 1 year
Remote distance| 30m(Barrier-free space)
Environment
Operation temperature| Ta: -30 OC ~ +55 OC
IP rating| IP20
Safety and EMC
EMC standard (EMC)| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certification| CE,EMC,LVD,RED
Weight
Net weight| 48 g
Gross weight| 88g
Warranty
- Warranty 5 years
Mechanical Structures and Installations
To Fix the remote, three options are offered for selection:
- Option 1: stuck the remote on any metal surfaces directly.
- Option 2: fix the remote’ back holder on the wall with two screws.
- Option 3: adhere the remote’ back holder to the wall with paster
Operation
- When turn on light, the indicator display blue. when turn off light, the indicator display red.
- When touch the color wheel, the indicator will display the same color.
- When press or touch operation is invalid (If the light is off), the indicator display red.
- To extend battery life, no touch or press key operation after a few seconds, the touch wheel will enter sleep state, you need press any key to make touch wheel quit sleep state.
Match Remote Control (two match ways)
End user can choose the suitable match/delete ways. Two options are offered for selection
Use the controller’s Match key
- Match:
- Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) of the remote. The LED indicator fast flash a few times means match is successful
- Delete :
- Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted.
Use Power Restart
- Match:
- Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.
- Delete:
- Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.
Key function
- RT1 1 zone dimming remote
- RT6 4 zone dimming remote
The remote can be used as 4 zone dimming remote or single-zone 4-channel dimming remote.
- On/Off + 4: Long press 2s set as 4 channel dimming remote, only match with one or multiple receiver of 4 channel, such as V4 or C4 controller.
- On/Off + 1: Long press 2s set as 4 zone dimming remote, each zone match with one or multiple receivers.
When set ok, the red indicator will light on longer.
- RT8 8 zone dimming remote
Safety information
- Read all instructions carefully before you begin this installation.
- When installing battery, pay attention to the battery positive and negative polarity.
- A long time without the remote control, remove the battery. When remote distance becomes smaller and insensitive, replace the battery.
- If no response from the receiver, please re-match the remote.
- Gently handle remote, beware of falling.
- For indoor and dry location use only
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>