tuya WT1 Wi-Fi And RF 2CH LED Controller User Guide
- June 17, 2024
- Tuya
Table of Contents
tuya WT1 Wi-Fi And RF 2CH LED Controller
Specifications
- Model: WT1
- Control Channels: 2
- Control Methods: Tuya APP cloud control, Voice control, Push-Dim, Wireless remote control
- Input Voltage: 12-36VDC
- Input Current: 10.5A
- Output Voltage: 2 x (12-36)VDC
- Output Current: 2CH, 5A/CH
- Output Power: 2 x (60-180)W
- Output Type: Constant voltage
- Dimming Data: Tuya APP + RF + Push Dim
- Control Distance: 30m (Barrier-free space)
- Dimming Range: 0 – 100%
- Dimming Curve: Logarithmic
- PWM Frequency: 2000Hz (default)
- Warranty: 5 years
Product Usage Instructions
Installation
The WT1 WiFi & RF 2CH LED Controller is used for controlling single-color or color temperature LED strips. Follow these steps to install the controller:
- Connect the power input (+) and (-) terminals to a 12-24VDC power source.
- Match the light type by pressing the Match/Set key before connecting to the Tuya APP network.
- Connect with an external push switch for on/off and dimming function.
Operation
To operate the controller:
- Press and hold the Match/Set key for 8 seconds until the RUN LED indicator turns white to switch to DIM mode.
- Release the key and use the Tuya APP for smart configuration or short press the Match key to pair with a dimming RF remote.
FAQ
Q: How do I connect the WT1 controller to the Tuya APP?
A: Before connecting to the Tuya APP, make sure to set the light type by pressing the Match/Set key on the controller. Then follow the app’s instructions for network connection.
Q: Can I use multiple WT1 controllers simultaneously?
A: Yes, each WT1 controller can work as a WiFi-RF converter, allowing you to control multiple RF LED controllers or dimming drivers synchronously using the Tuya APP.
Q: What is the warranty period for the WT1 controller?
A: The WT1 controller comes with a warranty of 5 years, providing protection against reverse polarity, over-heating, and short circuits.
Tuya APP cloud control/Voice control/2 Channels/Push-Dim/DC power socket input/Wireless remote control
Features
- Used for controlling single colour or color temperature LED strip.
- DC power socket input and 2-channel constant voltage output.
- Tuya APP cloud control, support on/off, color temperature and brightness adjust, delay turn on/off light, timer run, scene edit and music play function.
- Voice control, support amazon ECHO and TmallGenie smart speaker.
- Match with RF 2.4G remote control optional.
- Users need set light type by press key before Tuya APP network connection and match RF remote of the same light type.
- Each WT1 controller can also work as WiFi-RF converter, then use Tuya APP to control one or more RF LED controller or RF LED dimming driver synchronously.
- Connect with external push switch to achieve on/off and 0-100% dimming function.
- Light on/off fade time 3s selectable
Technical Parameters
Input and Output
Input voltage| 12-36VDC
Input current| 10.5A
Output voltage| 2 x (12-36)VDC
Output current| 2CH,5A/CH
Output power| 2 x (60-180)W
Output type| Constant voltage
Safety and EMC
EMC standard (EMC)| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certification| CE,EMC,LVD,RED
Dimming data
Input signal| Tuya APP + RF + Push Dim
Control distance| 30m(Barrier-free space)
Dimming gray scale| 4096 (2^12) levels
Dimming range| 0 -100%
Dimming curve| Logarithmic
PWM Frequency| 2000Hz (default)
Environment
Operation temperature| Ta: -30 OC ~ +55 OC
Case temperature (Max.)| T c: +85OC
IP rating| IP20
Warranty and Protection
Warranty| 5 years
Protection
| Reverse polarity
Over-heat Short circuit
Mechanical Structures and Installations
System wiring
Note:
- The above distance is measured in spacious (no obstacle) environment, Please refer to the actual test distance before installation.
- Please check if the WiFi router net in 2.4G band, the 5G band is not available, and do not hide your router network.
- Please keep the distance between WT1 devices and router close, and check the WiFi signals.
Wiring Diagram
For single color
Dimming remote
- Press and hold the match/set key for 8s, until the RUN LED indicator turn white, then release, the controller will become DIM type, then do smart config by tuya APP, or short press match key to match with the dimming RF remote.
For dual-colour CCT
CCT remote
Press and hold match/set key for 10s, until the RUN LED indicator turn yellow, then release, the controller will become CCT type, then do smart config by tuya APP, or short press match key to match with CCT RF remote.
Note:
- User can connect constant voltage power supply or power adapter as power input.
- Switch off the power, then switch on power, repeat again. Immediately short press match key 3 times, the light on/off time will change between 3s and 0.5s.
- For CCT light, continuous power off and on will change 3 levels color temperature (WW, NW and CW) in sequence.
Push Dim
DIM
Single color
| Click| ON/OFF
---|---|---
Double Click| Turn on at 100% or 10%(night light) and vice-versa
Long press(>1s) from OFF| Dimming UP/DOWN
Long press(>1s) from ON| Dimming UP/DOWN
CCT
Dual Color
| Click| ON/OFF
Double Click| Turn on at 100% or 10%(night light) and vice-versa
Long press(>1s) from OFF| Color temperature UP/DOWN (turn off and turn on to
return dimming)
Long press(>1s) from ON| Dimming UP/DOWN
Tuya APP network connection
Press and hold Match/Set key for 2s, or push twice Match/Set key fastly, or when press and hold Match/Set key for 8 or10s to set 2 kinds light type: Clear previous network connection, enter Smart config mode, the purple LED indicator flash fastly, the output LED will flash 10 times. Press and hold Match/Set key for 5s: Clear previous network connection, enter AP config mode, the purple LED indicator flash slowly. If smart config failed, please try AP config. Repeat power on and off for 5 consecutive times, also clear previous network connection, enter Smart config mode, the output LED will flash 10 times. If Tuya APP network connection succeed, the RUN LED indicator will stop flash purple, and turn corresponding light type color (White: DIM, Yellow: CCT. and in Tuya APP, you can find DIM or CCT device.
Tuya APP interface
DIM:
- Touch brightness slide to adjust brightness
CCT:
- Touch color wheel to adjust color temperature. Touch brightness slide to adjust brightness
WT1 match remote control (Optional)
End user can choose the suitable match/delete ways. Two options are offered for selection:
Use the WT1’s Match key
- Match:
- Short press match key of WT1, immediately press on/off key (single zone remote) or zone key (multiple zone remote) on the remote. The LED indicator fast flash a few times means match is successful.
- Delete:
- Press and hold match key of WT1 for 15s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted
Use Power Restart
- Match:
- Switch off the power of WT1, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.
- Delete:
- Switch off the power of WT1, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.
WT1 work as WiFi-RF converter to match RF LED controller or dimming driver
End user can choose the suitable match/delete ways. Two options are offered for selection:
Use the controller’s Match key
- Match:
- Short press match key of the controller, immediately press on/off key on the Tuya APP. The LED indicator fast flash a few times means match is successful.
- Delete:
- Press and hold match key of the controller for 5s, The LED indicator fast flash a few times means match was deleted
Use Power Restart
- Match:
- Switch off the power of the controller, then switch on power, repeat again. Immediately short press on/off key 3 times on the Tuya APP. The light blinks 3 times means match is successful.
- Delete:
- Switch off the power of the controller, then switch on power, repeat again. Immediately short press on/off key 5 times on the Tuya APP. The light blinks 5 times means match was deleted
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>