Bol Modern Black Steel Pivot Door 3 Sections with Clear Glass Instruction Manual
- June 17, 2024
- bol
Table of Contents
Bol Modern Black Steel Pivot Door 3 Sections with Clear Glass
Product Information
Specifications:
- Compatible Wall Types: Wooden Wall, Cement Wall
- Hardware Included: ST4.8×25 screws(x2), ST4.8×38 screws(x2), M8x25 screws(x4)
- Door Opening Height: H+24mm, Door Width: W+13mm
- Maximum Door Thickness: 80mm
Product Usage Instructions
Pre-installation:
- Tools Required: Drill, Pencil
- Components List: A, B, C, D
Installation Steps:
- Mark the hole position on the wall using a pencil as per the provided measurements.
- Drill holes at the marked positions on the wall.
- Fix the top pivot plate using the provided screws (B x 1, x2).
- Loosen the screws to retract the pin.
- Fasten the screws to extend the pin inside the top pivot.
- Adjust the positioning of the door to fit the opening.
- Mount a handle on the door (Component D x 1).
Door Preparation:
Ensure the door height and width match the specified measurements for proper
installation.
FAQ:
Q: Can this door be installed on any type of wall?
A: The door is compatible with both wooden and cement walls as per the
components provided.
Components list
Pre-installation
TOOLS REQUIRED
HARDWARE INCLUDED
Door Preparation
Installation
-
Mounting Plate Drilling Hole Size.
-
Insert screws after drilling the mounting plate. Then fix the mounting plate well.
-
Mark the hole position by pencil.
-
Drill holes.
-
Fixing the top pivot plate.
-
Loosen the screws to make the pin retract.
-
Fasten the screws to make a pin pot out inside the top pivot.
-
Adjust the positioning of the door.
-
Adjust the buffer speed.
Adjust the buffer speed between the first and second speeds. Adjust the first speed, then adjust the second speed till the door works smoothly. It is the best way to adjust speed to turn speed valves 1/4 circle every time.
-
Put on black steel covers.
-
Mount a handle.
