YUHAO 1203 GrandGlow Indoor Brushed Nickel Smart Ceiling Fan Instruction Manual

YUHAO 1203 GrandGlow Indoor Brushed Nickel Smart Ceiling Fan

Product Information

Specifications

• Model No.: 1203
• Type: Ceiling Fan
• Remote Control: Yes
• Smart Control: Tuya Smart WiFi Remote Control compatible
• Blade Material: Not specified
• Colour: Not specified

Product Usage Instructions

Safety Precautions
To ensure safe installation and operation of the ceiling fan, please adhere to the following safety precautions:

1. Always disconnect the power before installation.
2. Electrical work should be carried out by a qualified electrician.
3. Ensure proper grounding of electrical connections.
4. Maintain adequate clearance around the fan for safe operation.
5. Avoid using dimmers or light switches to control the fan.

Installation Steps

• Step 1: Basic Assembly of the Fan
  Follow the instructions provided in the manual to assemble the fan components.

• Step 2: Ceiling Bracket Installation
  Mount the ceiling bracket securely and hang the fan onto it following the provided guidelines.

• Step 3: Receiver and Wiring Installation
  Connect the receiver and wiring according to the instructions, ensuring all connections are secure.

• Step 4: Blade and Lighting Kit Installation
  Attach the blades and lighting kit to the fan as directed in the manual.

• Step 5: Power On and Testing
  Switch on the fan and test its operation to ensure proper functionality.

Remote Control Operation
Utilize the included remote control to conveniently operate the fan from a distance.

Troubleshooting
Refer to the troubleshooting section in the manual for guidance on resolving common issues.

Balancing
If you experience any imbalance or wobbling, use the provided blade balancing kit or visit www.pmwfan.com for further assistance.

FAQ

• Q: Can I install the ceiling fan without professional help?
  A: It is recommended that electrical connections be done by a qualified electrician to ensure safety and compliance.

• Q: How do I control the fan using the Tuya Smart WiFi Remote Control?
  A: Follow the instructions in the manual to set up and connect the fan to the Tuya Smart app for remote control functionality.

• Q: What should I do if the fan blades are too close to a wall?
  A: Ensure there is at least 30 inches of clearance between the fan blades and any obstruction for optimal airflow and safety.

• Q: Can I use dimmers or light switches to control the fan?
  A: No, direct connection to a properly protected installation circuit is recommended to avoid malfunctions and damage to the motor.

THANK YOU
We appreciate the trust and confidence you have placed in us through the purchase of this ceiling fan. We strive to continually create quality products designed to enhance your home. Thank you for choosing us!

Safety Precautions

The information contained in the following pages has been prepared to ensure your maximum enjoyment of your fan.
Please remove the fuse or turn off the circuit breaker to cut off the power before installing the fan. Ensure all electrical connections comply with local laws, regulations and national electrical codes. If you are not familiar with electrical installation and wiring, please hire a qualified electrician or consult the wiring manual.

1. For your safety, all electrical connections and disconnections should be performed by a qualified electrician.
2. Any action performed for the electrical connection of the device must be carried out after ensuring that the general power supply is disconnected, by removing the corresponding fuse or disarming the protective switch to ensure total isolation of the power supply.
3. When deciding where to mount the fan, be sure that there is at least 30 inches(76 cm) of space between the fan and any wall or other obstruction that the fan blades could collide with. The greater this distance, the more effective the airflow produced. After the fan is mounted, be sure that the blades are no less than 7ft(2.1 m) above the ground.
4. The anchor point for the fan must be able to support a weight of at least 100 pounds(45 kg). If mounting on a ceiling junction box, be sure that the fan is adequately supported to prevent loosening or turning.
5. The fan’s electrical connection must be “grounded” (the fan’s ground cable is connected to the installation’s grounding network) to avoid any branching that may be dangerous to people.
6. Do not connect the fan’s power supply to any dimmers, potentiometers, or light switches, as it will cause the fan to malfunction and/or will damage the motor. The fan must be directly connected to a properly protected installation circuit(magnetothermal differential switch with adequate size for the fan’s consumption and technical specifications). Only use the fan’s control to turn it on or stop it.
7. It is recommended to not use these types of fans along with gas installations simultaneously in the same room.
8. The fan must not be moving and must have come to a complete stop before changing its direction of rotation. This will prevent damage to its motor and to the control unit, when applicable.
9. Do not insert anything that could hit the fan’s blades into its pathway while it is moving, as this could cause damage to people, damage the blades, and offset the balance of the unit, causing vibrations and wobbling.
10. After installing the fan, ensure that all fastenings are secure and tightened to avoid any noise caused by loose elements.
11. Due to the fan’s movement, certain fastenings may become loose. Check all fastenings twice per year at a minimum to ensure that they are sufficiently tight. If necessary, they must be retightened.
12. The motor housing can be cleaned with a soft brush or a lint-free cloth to avoid scratching the surface. Clean the blades with a lint-free cloth. Important: Turn off the main power supply before starting any maintenance. Do not clean the fans with water or a damp cloth.

Note: The important warnings and instructions indicated in this manual are not guaranteed to cover all possible conditions and situations that may occur. It must be understood that common sense, precaution, and care are factors that cannot be included in all products. These factors can and must only be provided by the user who maintains and enjoys this fan.

Warranty

The manufacturer warrants the fan motor to be free from defects in workmanship and material present at the time of shipment from the factory for a period of a lifetime after the date of purchase by the original purchaser. The manufacturer also warrants that all other fan parts, excluding any glass or acrylic blades, be free from defects in workmanship and material at the time of shipment from the factory for one year after the date of purchase by the original purchaser. We agree to correct such defects without charge or at our option replace them with a comparable or superior model if the product is returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All costs of removing and reinstalling the product are your responsibility. Damage to any part such as by accident, misuse, improper installation or by affixing any accessories, is not covered by this warranty. Because of varying climatic conditions, this warranty does not cover any changes in brass finish, including rusting, pitting, corroding, tarnishing or peeling. Brass finishes of this type give the longest useful life when protected from varying weather conditions. A certain amount of “wobble” is normal and should not be considered a defect. Servicing performed by unauthorized persons shall render the warranty invalid. There is no other express warranty. We hereby disclaim any warranties, including but not limited to those of merchantability and fitness for a particular purpose to the extent permitted by law. The duration of any implied warranty that cannot be disclaimed is limited to the period as specified in the express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. The retailer shall not be liable for incidental, consequential, or special damages arising out of or in connection with product use or performance except as may otherwise be accorded by law. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion or limitation may not apply to you.

This warranty gives specific legal rights, and you may also have other rights that vary from state to state.
This warranty supersedes all prior warranties. Shipping costs for any return of product as part of a claim on the warranty must be paid by the customer.

Pre-Installation

Tools Needed

Installation kit

Blade balancing kit

Specification

Installation Instruction

Step 1 (Basic assembly of the fan)

1. Decompose drown rod.

2. Remove the screws which are used to install the blades.
   Importance: If you are going to use a long down rod, follow these steps.

3. Connecting the Spare Power Cable

4. Connecting the Spare Safety rope

5. Route all the wires from the motor the down rod through. Fix the down rod to the coupling with bolt, washer, nut, tighten the nut, and tighten the mfirmly, then insert the clevis pin. Last tighten the two screws on the coupling.

6. Assemble the canopy, coupling cover, and hanging ball through the down rod. Then insert the fixing pin, push the hanging ball up, and fix it with screws.

Step 2 (Ceiling bracket installation and fan into the installed bracket.)

1. Turn off the fan power supply at the circuit breaker box and the wall switch.

2. Can be installed on <10º sloped roof.
   Choose the following installation methods according to the actual situation of the roof.

3. Snap the assembled fan into the installed bracket.

Step 3 (Receiver and wiring installation)

1. Make the wire connection in accordance to the wiring diagram provided.
2. Put the receiver into the bracket and tidy up the wires. Rotate the canopy counter-clockwise until screw heads engage the key slots fully. Tighten the screws. Be careful not to damage or cut the wiring.

Step 4 (Install blades and lighting kit)

1. Fix blade to blade connector with screws.
2. Align the connected blade with the mounting hole, and then fix it with screws.
3. Remove the 3pc pre-installed screws from the motor assembly, and connect the terminal. Then fix the light kit to the main body with screws.

Step 5 (Switch on and ceiling fan works)

Remote Control Operation

Transmitter learning process

1. Insert the 2 pcs of batteries into the transmitter. for about 3 sec
2. Turn on the power supply to the fan. Within 10 sec, press and hold the “1” and “2” buttons for about 3 sec. Once the receiver has detected the frequency, the receiver will “Beep Beep” twice. The programming process is completed and fan is ready to use.

NOTE: The remote control device has already been code-matched when it leaves the factory. If the fan is not responding to the transmitter, repeat the transmitter learning process.

ABOUT THE MEMORY FUNCTION OF LIGHTS: Please wait for more than 3-5 seconds keep this color that you need at first, and then turn it off wait for at least 10 seconds turn on again. This light color would be your need.

IMPORTANT: The fan can only operate normally after all blades are installed. If the fan is turned on without installing the blades, the receiver will detect that the fan speed is too fast and the fan will automatically stop.

Tuya Smart WiFi Remote Control

1. Search and download “Tuya Smart” in the App Store, Google play or scan QR.

2. Install and open the app.

3. Open your App account.
   Create a new account:

   • input your mobile number or email address.
   • click to get the verification code (check your mailbox).
   • input the verification code.
   • set login password.
   • accept the permissions.
   • you have your account created.

4. Turn on Bluetooth and WiFi, connect WiFi (Note: WiFi can only use 2.4G router)

5. Link the ceiling fan: Open App, then turn on the power supply of the fan controller and press and hold the “6h” button of the remote control handle for about 5 seconds within 10 seconds after the fan is powered on. At this time, click Add device in the App main interface, the light will flash and the connection icon of the fan will appear on the App interface. Next click “Add device” button.Then you can enter the mobile phone control interface to control the fan (Note: When Bluetooth matching, the fan motor cannot work).

NOTES

1. Please check whether the WIFI account and password information are correct.
2. Reducing the distance between mobile phone, router and an receiver can connect more faster, otherwise it may cause connection failure.

Third-Party Voice Servives

Troubleshooting

WARNING: Make sure the power is off at the electrical panel box before you attempt any repairs.

breakers.
□ Check the line wire connections to the fan and switch wire connections in the switch housing.
□ Check to make sure the frequency switches from the remote control and receiver are set to the same frequency.
The fan sounds noisy.| □ Make sure all motor housing screws are snug.
□ Make sure the screws that attach the fan blade to the motor hub are tight.
□ Make sure the wire nut connections are not rattling against each other or the interior wall of the switch housing.
□ Allow a 24-hour “breaking-in” period. Most noises associated with a new fan disappear during this time.
□ If using the ceiling light kit, make sure the glassware is secured tightly.
□ Make sure there is a short distance from the ceiling to the canopy. It should not touch the ceiling.
□ Make sure your ceiling box is secure and that rubber isolator pads are used between the mounting bracket and outlet box.
The remote control is not working.| □ Do not connect the fan with wall mounted variable speed control(s).
□ Make sure the frequency switches are set correctly.

Balancing – Wobbling problems during fan operation
If the fan body wobbles during its operation, this is not a sign of malfunctioning (even if it wobbles a few centimeters). To reduce wobbling, you can turn off the fan,and:

1. Check that all blades are properly fastened by tightening their screws.
2. Check the distance between each blade and the ceiling. Measurements to the ceiling can be carried out as shown in the following diagram. If variations exist and you have already correctly tightened the screws, check that all blades have the same shape. If any of them have a shape that is visibly different, this may be causing an imbalance during fan operation.

If you have completed the previous steps and the wobbling has not resolved, you should apply dynamic balancing with the kit provided, as explained below:

1. Turn the fan on to the highest speed so that the greatest amount of wobbling is produced.
2. Turn off the fan. Select a blade and place a clip on it (see diagram) halfway between the fastening and the far edge of the blade.
3. Turn on the fan and check whether the wobbling has improved or gotten worse. Turn it off once again and if the wobbling has not improved, place the clip on another blade. Repeat this process and determine on which blade it improves the wobbling.
4. Leave the clip on the blade that produces the best results. Move the clip forward or backward on this blade until finding the position that offers the best results.
5. Afterwards, remove the clip and place one of the weights on the upper part of the centre line of the blade at the position where the clip was located.

Visit www.pmwfan.com for further assistance.

Questions, problems, missing parts? Before returning to the store, visit www.pmwfan.com for further assistance.
Retain this manual for future use.

References

• YUHAO

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>