Fibreshop LC and LCA Quick Connector Instruction Manual
- June 17, 2024
- Fibreshop
Table of Contents
Fibreshop LC and LCA Quick Connector
Specifications
| Component | Description |
|---|---|
| Strip Length | 40mm |
| Cleave Length | 250μm |
| Fiber Type | 0.25mm, 0.90mm, 2.0mm, 3.0mm |
Step-by-Step Instructions
- Strip the fiber to the specified length of 40mm.
- Clean the fiber with alcohol and a fiber cleaner.
- Cleave the fiber to a precise 250μm length.
- Insert the cleaved fiber into the fiber connector.
- Check the fiber length for accuracy using the provided gauge.
- Secure the fiber into the connector with the locking mechanism.
- Repeat the assembly process for additional connectors as needed.
Tools and Components
-
Fiber Stripper
Used for stripping the fiber to the correct length. -
Cleaning Tool
For cleaning the fiber with alcohol. -
Cleaving Tool
For cleaving the fiber precisely. -
Fiber Connector
The component that the fiber is inserted into and secured. -
Locking Mechanism
Used to secure the fiber within the connector. -
Fiber Length Gauge
Tool to check the accuracy of the fiber length after cleaving.
To use this product correctly, the instructions must be read carefully before use.
Please assemble the connector according to these instructions using the matched tools.
The specific operation example is referred to APC.
The product picture of this instruction is only for reference,please make the object as the standard.
Tools
Product Components
DIMENSION
INSTRUCTION
ASSEMBLY
Repeat assembly
FAQ
What types of fiber can be used with these connectors?
Connectors are compatible with 0.25mm, 0.90mm, 2.0mm, and 3.0mm fibers.
How do I know if the fiber is cleaved correctly?
Use the fiber length gauge provided to ensure the fiber is cleaved to a 250μm length.
Can I reuse the fiber connectors?
Generally, fiber connectors are not designed to be reused once they have secured a fiber.
What is the first step in preparing the fiber for connection?
The first step is to strip the fiber to a length of 40mm.