QueenFun MFMD-US Metal Frame Mirror Instruction Manual

: June 17, 2024
: QueenFun

Table of Contents

Installation Instruction
BRAND SUPPORT
PACKING LIST
INSTALLATION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**QueenFun MFMD-US Metal Frame Mirror Instruction Manual

**

Installation Instruction

Please read this instruction carefully before the installation and keep it for the future use and the warranty. If you have any problem, please feel free to contact us queenfun06@outlook.com

BRAND SUPPORT

Thanks for choosing us!

Queen Fun,a brand which is professional on produce the mirrors.

Your suggestions is important to us, we will appreciate if you let us know your ideas and we will improve our products to satisfy our customers.

For any problems, such as product damage/missing accessories/ mounting questions etc., please do not hesitate to contact us. Our official email address : queenfun06@outlook.com

Manufacturer warranty for 2 years from date of purchase.

Warm Remind: In order to facilitate the use of Queen fun products, please read this instruction carefully before the installation and keep it for the future use and the warranty.

PACKING LIST

Mirror x 1
Bracket x 1
M4*40 Screws x（3+2）
Anchors x（3+2）
Gloves x 1

INSTALLATION

Advised Installation Tools (Not offering)

Electric Drill
Hammer
Marker Pen
Tape Measure
Level
Phillips Screwdriver
Safety Goggles

Before installation, please confirm the installation position and installation height of the hang bracket supplied, and use a spirit level to make sure the bracket be leveled.
Then mark the hole positions on the wall.
Tips : The distance between the bottom of barcket and the top of the mirror is 2 (73.6mm).
The recommended installation safety distance is 3 inch(at least) from the faucet.

Tips: The mirror can be hung on horizontally or vertically.
You can choose the hanging method according to your preference.
To punch holes on the marked spots with an electric drill, and then punch the wall anchors with a hammer. 15/64” (6mm) drill bit, drilling depth in 13/4” (45mm).

Note: Please wear goggles and pay attention on your safety.
Mount the bracket to the wall with screws.
Align the mirror hook with the bracket slot, slowly lower the mirror so that the hook fits into the slot, and gently shake the mirror to ensure that the mirror is securely installed.