X Rocker 5113401 Flash 2.0 Gaming Chair User Guide

June 17, 2024
X-Rocker

X Rocker 5113401 Flash 2.0 Gaming Chair User Guide
X Rocker 5113401 Flash 2.0 Gaming Chair

SWITCHTM CONNECTION GUIDE

Connection

  1. Connect the B1 cable to the bottom of the Switch TM via the headset socket.***
  2. Connect the other end of the B1 cable to the chair via the green input port.

XBOX ONETM /SERIESTM CONTROLLER GUIDE

  1. Connect the B1 cable to the bottom of the Xbox TM controller via the headset socket.**
  2. Connect the other end of the B1 cable to the chair via the green input port.
  3. The Xbox TM will automatically recognize the connection and pass through to the product.
  4. To increase volume, press the guide button, navigate to the speaker icon and increase the headset volume setting.

PS4TM DUALSHOCK 4TM CONNECTION GUIDE

  1. Connect the B1 cable to the bottom of the PS4TM controller via the headset socket.

  2. Connect the other end of the B1 cable to the chair via the green input port.

  3. With the PS4TM turned on, go to the main menu (or locate the main menu screen).
    Press and hold the PS button on the PS4TM controller until the quick menu appears on screen.

  4. In this menu select [Adjust sound and devices].

  5. Then select [Output to Headphones].

  6. Change the setting from [Chat Only] to [All Audio].

  7. Make sure the volume in the previous menu is set to the maximum.

PS5TM DUALSENSETM CONNECTION GUIDE

  1. Connect the B1 cable to the bottom of the PS5TM Dual sense controller via the headset socket.
  2. Connect the other end of the B1 cable to the chair via the green input port.
  3. Press the Play Station TM button once to bring up the control center.
  4. Select [Sound] > [Output Device] > [Headset (controller)].
  5. Ensure that [Output to Headphones] is correctly set to [All Audio].
  6. You can check this by going to [Settings] > [Sound] > [Audio Output] > [Output to headphones] > [All Audio].

** You may need an Xbox One TM headset adapter if a headset socket is not available on your controller. These are available separately through any gaming retailer.

CONNECT TO TV (WIRED)

Connection

  1. Connect the B1 cable to X Rocker control panel INPUT socket.
  2. Connect other end of the B1 3.5mm end into the headphone socket of your television.*
  3. Once connected to your TV, increase volume to 50% of the maximum for the best sound level.**
  • If your TV does not feature a headphone socket then you may need to purchase an additional TO Slink adapter to get connected directly to a console for audio.
    **Depending on your TV, you may need to increase the headphone volume separately in the TV sound settings.

TROUBLESHOOTING TIPS

NO POWER GOING TO THE CONTROL PANEL

  • Make sure the power cable is connected correctly.
  • Make sure that the power source is working correctly.
  • With the chair turned to the ON position, give the power cable a slight wiggle in the port. If any light flickers (or not) please contact support (UK: xrockeruk.com/pages/support).

NO SOUND

  • Connect a mobile phone to the X Rocker using the phone connection guidelines in the manual to test the chair for sound.
  • Confirm that the device/system is correctly configured as per previous connection guide.
  • Make sure that you indeed have a headphone socket on your TV. This will typically be marked with a headphone symbol or “H/P OUT”.

STEREO SPEAKERS DO NOT PRODUCE SOUND/SOUND IS FAINT

  • Please make sure the volume of the source device is at a higher level to strengthen the audio signal.

THE CABLES CONNECTED TO MY X ROCKER HAVE BEEN BROKEN ACCIDENTALLY

  • Please contact X Rocker support (details below) regarding this issue.

DON’T HAVE A HEADPHONE SOCKET ON YOUR TV?

  • You may need to purchase a TO Slink adapter. If you are unsure as to which to purchase, please contact X Rocker support (details below) regarding this issue.

NEED ADDITIONAL ASSISTANCE? CONTACT X ROCKER SUPPORT:

WWW.XROCKERGAMING.COM
XROCKERGAMING.COM/PAGES/SUPPORT

WWW.XROCKERUK.COM
XROCKERUK.COM/PAGES/SUPPORT

HEALTH AND SAFETY INFORMATION

  • For the first time use and installation of your X Rocker product, please ensure that cables and power supplies are handled by a adult to ensure safe and correct usage.
  • Make sure to unplug the X Rocker Power supply from the mains socket before cleaning.
  • Avoid direct contact with liquids. To clean, wipe with a damp cloth. If a spillage occurs, switch off the X Rocker and wait for the product to dry before reusing.
  • Do not use any type of abrasive pad or abrasive cleaning solutions as these may damage the X Rocker surface material.
  • Please consult X Rocker Support before unscrewing and disassembling any of the electrical components or undertaking any changes to the chair. If any unauthorized modifications or repairs are made before consultation, then this will void your warranty.
  • To reduce potential trip hazards or entanglement hazards, arrange and secure any cables so that people and pets are not likely to trip over or accidentally pull on them as they move around or walk through the area.
  • Please be careful when rotating and swiveling the X Rocker when in use. Cables and wires may be pulled or damaged in the process and cause damage to the X Rocker control panel or cabling.
  • If any of the cables or electrical equipment become damaged in any way, stop using immediately and contact X Rocker for more details on how to replace the component.
  • Do not stand on the chair at any time or exceed the 120kg weight limit via other means.
  • Do not lean back on the chair or force the chair to the point in which the pedestal would lift off the ground as this will potentially cause damage to the product or injury to the user.
  • X Rocker armrests are designed for support and comfort during gameplay, please do not stand or sit of the arms directly. Do not apply weight to the armrests when leaving the chair to ensure long term durability.
  • Do not use the X Rocker speakers at high volume for any extended period. To avoid hearing damage, use your speaker at a comfortable, moderate volume level. Parents, please monitor your child’s usage to avoid long term hearing loss or discomfort.
  • When not in use, keep cables and power supplies out of reach of children, please also ensure that these are not subject to harsh impacts such as dropping or throwing the components.
  • Never place any type of candle or naked flame on or near the X Rocker at any time. While X Rocker products are compliant with UK and European fire safety regulations, prolonged exposure to naked flames will result in damage to the product and other safety hazards.

POWER SUPPLY SAFETY INFORMATION

ATTENTION:
A. To reduce the risk of fire, electric shock or product damage, do not expose the X Rocker power supply to rain, moisture, dripping or splashing. No objects filled with liquids, such as vases, should be placed near the power supply. If you spill any liquid into the power supply, it can cause serious damage. Switch it off at the mains immediately. Withdraw the power supply and consult your dealer.
B. Always disconnect the power supply from the mains before connecting/disconnecting other devices or moving the X Rocker.
C. Only use the supplied cables, power supplies and accessories specified by and manufactured by X Rocker.
D. Avoid extreme degrees of temperature, either hot or cold. Place the unit well away from heat sources such as radiators or gas/electric fires.
E. Avoid exposure to direct sunlight and other sources of heat.
F. Ensure that cables and power supplies are kept in a safe location, out of the reach of children to avoid any potential hazards that include; dropping, throwing, tripping over, cutting etc. If you encounter any visible notches or cuts in the power supply or other cables, avoid using the product and contact X Rocker Support for more assistance.

Power Supply Unit trademark: BI
Model name: BI12T-050100-BdU
Input: AC 100-240V ~ 50/60Hz 0.5A
Output: DC 5V 1.0A

NEED ADDITIONAL ASSISTANCE? CONTACT X ROCKER SUPPORT

WWW.XROCKERGAMING.COM
XROCKERGAMING.COM/PAGES/SUPPORT

WWW.XROCKERUK.COM
XROCKERUK.COM/PAGES/SUPPORT

Missing parts?
Contact X Rocker Support

XROCKERGAMING.COM
XROCKERGAMING.COM/PAGES/SUPPORT

WWW.XROCKERUK.COM
XROCKERUK.COM/PAGES/SUPPORT

VIEW LATEST INSTRUCTIONS ONLINE:
QR Code
Company logo

Documents / Resources

| X Rocker 5113401 Flash 2.0 Gaming Chair [pdf] User Guide
5113401 Flash 2.0 Gaming Chair, 5113401, Flash 2.0 Gaming Chair, 2.0 Gaming Chair, Gaming Chair
---|---

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

X-Rocker User Manuals

Related Manuals