ALPINE HDZ-653S 6.5” 2-Way Slim-fit Component Speaker Set Owner’s Manual

ALPINE HDZ-653S 6.5” 2-Way Slim-fit Component Speaker Set

CONTENTS

EXTERNAL DIMENSIONS

• Woofer (HDZ-653S/HDZ-65CS)

• Woofer (HDZ-653S/HDZ-65CS)

• Midrange Speaker (HDZ-653S)

• Haunt – parlor medium (HDZ-653S)
  

• Tweeter (HDZ-653S/HDZ-65CS)

• Tweeter (HDZ-653S/HDZ-65CS)
  

• Network (HDZ-653S)

• Filter (HDZ-653S)

• Network (HDZ-65CS)

• Filter (HDZ-65CS)
  

WIRING CONNECTION

• HDZ-653S
  

• HDZ-6SCS
  

• Network (HDZ-653S)

• Filter (HDZ-653S)

• Network (HDZ-6SCS)

• Filter (HDZ-6SCS)

INSTALLATION

• Woofer (HDZ-653S/HDZ-65CS)

• Woofer (HDZ-653S/HDZ-65CS)
  

• Midrange Speaker (HDZ-653S)

• Haunt- parlor medium (HDZ-653S)

• Tweeter (HDZ-653S/HDZ-65CS)
  Swivel flush mount
  Montage rotative affeered mint

• Tweeter (HDZ-653S/HDZ-65CS)
  Stealth (may require gluing)
  Montage cache (un collage puttered necessaire)

SPECIFICATIONS

| HDZ-653S| HDZ-65CS
---|---|---
Units Type| Woofer| 6-1/2″(16.5 cm) Carbon Cone| 6-1/2″(16.S cm) Carbon Cone
Midrange Speaker| 3-1/2″(8.9 cm) Carbon Cone|
T weeter| 1″”(2.5 cm) Carbon Cone| 1″(2.5 cm) Carbon Cone
Maximum P ea k P owe r| 300 Watts in system| 300 Watts in system
Maximum RMS P owe r| 100Watts in system| 100 Watts in system
Impedance| 4ohms| 4ohms
Sensitivity| 88 dB SPL (2.83 V @ 1 m)| 88 dB SPL (2.83 V @ 1 m)
Frequency Response| 55 Hz to 40 kHz| 55 Hz to 40 kHz
Mounting Deps/D ropin Mounting| Woofer| 2-3/4″ (6.7 cm)| 2-3/4″ (6.7 cm)
Midrange Speaker| 1-9/16″(3.9 cm)|
Cutout Diameter| Woofer                              5-5/8″ (14.2 cm)| 5-5/8″ (14.2 cm)
Midrange Speaker 1 3-1/8″ (7.9 cm)|
Recommended Amplification                                             I Up to 100 watt s RMS. per channel| Up to 100 watts RMS . perchance l

Design and specifications are subject to change without notice.

[Warning]

1. RMS Power/ Peak power specified on this product is the value in 3way (HDZ-653S) / 2way (HDZ-65CS) system connected to passive network included in this package.
   Using each speaker connected directly to amplifier without using designated network will void your warranty.

2. This product contains a high-performance tweeter.
   If there is a tweeter already installed in your car, you must disconnect its terminal.
   If you leave the original tweeter connected and connect this product in parallel, fault may occur in this product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>