Saqico Q93 Upgraded Head Strap for Meta Oculus Quest 3 User Guide
- June 17, 2024
- Saqico
Table of Contents
Saqico Q93 Upgraded Head Strap for Meta Oculus Quest 3 User Guide
Important Note:
Before installing, be sure to confirm the letter “L” and “R” icon on the
buckle and extension arm. Once mixed, it will be troublesome to remove the
buckles, and you may need a straight tool to pry the buckles.
Package Include
- With 360° Round Rotation Knob frame structure
- Upper head strap frame structure
- Lower head strap frame structure
- L round buckle
- R round buckle
- L long strip buckle
- R long strip buckle
- Large Sponge pads
- Small Sponge pads
- Top strap pad
Installations Instruction
Install buckles with arm band
Use the Part 1: Rotate the 360° Round Rotation knob counterclockwise to extend the band to the Longest Position.
1360° Round Rotation Knob frame structure
Find the Part 4 L round buckle and Part 6L long strip buckle as the Picture
6L long strip buckle
4 L round buckle
1 extend band L “hole”
Use Part 1 extend band L “hole” to fit the 6L”hole”, as the Picture Make sure
The “L” mark of 1 and 6 are upwards as the Picture
Use the Part 4″L” to press on it. Make sure middle of Part 4″ small circular
colunm” into the hole, and Part 4 feet align with the 4 holes. also the Part 4
“Gap” side is align with part 1″L”extend dege Then hard press the 4 feet into
the 4 holes.
Please pay attention: you need Press a little hard to press it in, and Once Press inside, It can’t be disassembled. So Please make sure all the Part use is correct and follow our guidance, expecially the “L” and “R”, up or down etc.
Find the Part., use the Same way as the left “step” to complete the Right Section.
Install the head strap frame structure
Put the part 2 into “up” hole of the part 1.
Then Push hard align with the mark ” ” Postion to the Right.
Ensure stability without falling off.
Use the same way, put the into down hole of the part 1.
Install with the Sponge Pads
Stick the small Sponge “Part on the inner surface of Part 2
Stick the large Sponge “Part 8 on the inner surface of Part 11
Put the Top strap pad “Part 10” through the part 2 hole
Install with your VR Headset
Use The Part 10″ Top Strap Pad through the The VR Headset Top “Hole”
Use the part fit into the VR L “ear” Hold the Side of Postion and hard press
the other side of Until heard a “Click “Sound means it is installed.
Use the same way install the “R” side. adjust the elastic black band and rotate the knob to adjust the headset with your head.
Customer Service
Saqico is devoted to providing you high quality product for more comfortable
and immersive gaming experience wandering in the VR world.
If you have any problems, please feel free to contact us.
E-mail: customerafterservice@gmail.com
24 Hours Services
Please Scan the right QR Code for get Video Installations
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>