Lenovo T24i-30 ThinkVision 23.8 60Hz IPS Full HD Monitor User Guide

Think Vision
ThinkVision T24i-30
User Guide
Machine Types: 63CF-MARX-WW
Think

T24i-30 ThinkVision 23.8 60Hz IPS Full HD Monitor

Product numbers
A22238FT0
63CF-MARX-WW
F22238FT0
63CF-MARX-WW

First Edition (July 2022)
© Copyright Lenovo 2022.
LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure.
LIMITED AND RESTRICTED RIGHTS NOTICE: If products, data, computer software, or services are delivered pursuant a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925.

Safety information

General Safety guidelines

For tips to help you use your computer safely, go to: http://www.lenovo.com/safety
Before installing this product, read the Safety Information.

This equipment is not suitable for use in locations where children are likely to be present, avoid hurting your child when machine falling down.

Chapter 1.Getting started

This User’s Guide provides detailed operation instructions for the user. For quick instruction overview, please see the Setup Poster for brief information.
T24i-30 supports Lenovo Accessories and Display Manager-ThinkColour.
Formerly Lenovo Display Control Center.

Shipping contents

The product package should include the following items:
■ Information Flyer
■ Flat Panel Monitor
■ Power Cord
■ DP Cable(Optional)
■ HDMI Cable
■ USB 3.0 Cable
■ Base
■ Stand

*: Depending on many factors such as the processing capability of peripheral devices, file attributes, and other factors related to system configuration and operating environments, the actual transfer rate using the various USB connectors on this device will vary and is typically slower than the data rates as defined by the respective USB specifications: – 5 Gbit/s for USB 3.1 Gen 1; 10 Gbit/s for USB 3.1 Gen 2 & 20 Gbit/s for USB 3.2.

Notice for use
To set up your monitor, please see the illustrations below.
Note: Do not touch the monitor within the screen area. The screen area is glass and can be damaged by rough handling or excessive pressure.

1. Take out the Top cushion and accessories.

2. Mounting the stand to monitor’s recess.
   • Insert the three tabs on the upper part of the stand to the groove on the back of the monitor.
   • Press the stand down till it snaps into place.

3. Insert the base towards the stand and tighten the thumbscrew.

4. Stand up the monitor with both hands carefully.
   Note: To install a VESA mount, please see “Wall Mounting (Optional)”on page 2-11.

Product overview

This section will provide information on adjusting monitor positions, setting user controls, and using the cable lock slot.
Types of adjustments
Tilt

Please see the illustration below for an example of the tilt range.

Swivel
With the built-in pedestal, you can tilt and swivel the monitor for the most comfortable viewing angle.

Height Adjustment
For height adjustment, user needs to press down or lift up the monitor.

Monitor

• Adjust the screen position before rotating the monitor screen. (Make sure that the monitor screen ascent to its highest point, and it inclines backward at 23.5°.)
• then rotate clockwise until the monitor stops at 90°.

Monitor controls
The keypad controls on the back cover are accesses to various functions.

For information on how to utilize these keypad controls, please see “Adjusting your monitor image”on page 2-3.
Cable lock slot
Your monitor is equipped with a cable lock slot located on the rear of your monitor

Setting up your monitor
This section provides information on how to set up your monitor.
Connecting and turning on your monitor
Note: Be sure to read the Safety information on page iv before carrying out this procedure.

1. Power off your computer and all attached devices, and unplug the computer power cord.
   

2. Connect the cables according to below icon indication.
   

3. For computer in DisplayPort connecting.
   For other regions Lenovo recommends that customers who require to use the DP Cable on their monitor purchase the “Lenovo DisplayPort to DisplayPort Cable 0A36537” www.lenovo.com/support/monitoraccessories.
   

4. For computer in HDMI connecting.
   Lenovo recommends that customers who require to use the HDMI input on their monitor purchase the “Lenovo HDMI to HDMI cable OB47070” www.lenovo.com/support/monitor accessories.
   

5. For computer in Analog Signal Cable connecting.
   

6. Connect one end of the USB cable to the USB upstream terminal on the back of the monitor,and connect the other end of the USB cable to an appropriate USB port on your computer.
   

7. Connect one end of the USB cable to the USB downstream terminal on the side of the monitor,and connect the other end of the USB cable to an appropriate USB port on yourdevice.
   Note:
   1.The USB downstream port does not provide power while the monitor is switched off.
   2.Power output for USB-A: 5V/0.9A.
   

8. Connect the audio cable of the sound box and the audio jack of the monitor to transmit audio sources from DP and HDMI.
   Note: The audio output in Display Port, HDMI modes.
   Please be aware that excessive and/or extreme volume might damage your hearing ability.
   

9. Insert the power cord into the monitor, then plug the monitor power cord and the computer cord into grounded electrical outlets.
   Note: A certified power supply cord has to be used with this equipment. The relevant national installation and or equipment regulations shall be considered. A certified power supply cord not lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation H05VV-F 3G 0.75mm² ) shall be used. Alternative a flexible cord be of synthetic rubber according to IEC 60245 (designation H05RR-F 3G 0.75mm²or H05VVH2-F2 3G 0.75mm² ) shall be used.
   

10. Power on the monitor and the computer.
    

11. When you install the monitor driver, download the driver that corresponds to your monitor model from the Lenovo website https://pcsupport.lenovo.com/solutions/t24i_30. Refer to the “Manually installing the monitor driver”on page 3-5 section to install the driver.
    

Registering your option
Thank you for purchasing this Lenovo™ product. Please take a few moments to register your Product and provide us with information that will help Lenovo to better serve you in the future. Your feedback is valuable to us in developing product and services that are important to you, as well as in developing better ways to communicate with you. Register your option on the following Web site: http://www.lenovo.com/register
Lenovo will send you information and updates on your registered product unless you indicate on the Web site questionnaire that you do not want to receive further information.

Chapter 2.Adjusting and using your monitor

This section will give you information on adjusting and using your monitor.

Comfort and accessibility
Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use to suit your individual needs and the kind of work that you perform. In addition, use healthy work habits to maximize your performance and comfort while using your computer. For more detailed information on any of these topics, visit the Healthy Computing Web site at: http://www.lenovo.com/healthycomputing/.
Arranging your work area
Use a work surface of appropriate height and available working area to allow you to work in comfort.
Organize you work area to match the way you use materials and equipment. Keep your work area clean and clear for the materials that you typically use and place the items that you use most frequently, such as the computer mouse or telephone, within the easiest reach. Equipment layout and setup play a large role in your working posture. The following topics describe how to optimize equipment setup to achieve and maintain good working posture.

Positioning and viewing your monitor

Position and adjust your computer monitor for comfortable viewing by considering the following items:

• Viewing distance: Recommended viewing distance between the eye and the monitor screen is 1.5 x the diagonal of the screen. Solutions in meeting this required distance in cramped office situations include pulling desk away from wall or divider to make room for monitor, using flat panel or compact displays placing the monitor in the desk corner, or placing the keyboard in an adjustable drawer to create a deeper working surface.
• Monitor height: Position the monitor so your head and neck are in a comfortable and neutral (vertical, or upright) position. If your monitor does not have height adjustments, you might have to place books or other sturdy objects under the base of the monitor to achieve the desired height. A general guideline is to position the monitor such that the top of the screen is at or slightly below your eye-height when you are comfortably seated. However, be sure to optimize your monitor height so the line of site between your eyes and the center the monitor suits your preferences for visual distance and comfortable viewing when your eye muscles are in a relaxed state.
• Tilt: Adjust the tilt of your monitor to optimize the appearance of the screen content and to accommodate your preferred head and neck posture.
• General location: Position your monitor to avoid glare or reflections on the screen from overhead lighting or nearby windows.

The following are some other tips for comfortable viewing of your monitor:

• Use adequate lighting for the type of work you are performing.
• Use the monitor brightness, contrast, and image adjustment controls, if equipped, to optimize the image on your screen to meet your visual preferences.
• Keep your monitor screen clean so you can focus on the screen’s contents.

Any concentrated and sustained visual activity can be tiring for your eyes. Be sure to periodically look away from your monitor screen and focus on a far object to allow your eye muscles to relax. If you have questions on eye fatigue or visual discomfort, consult a vision care specialist for advice.

Quick tips for healthy work habits

The following information is a summary of some important factors to consider to help you remain comfortable and productive while you use your computer.

• Good posture starts with equipment setup: The layout of your work area and the setup of your computer equipment have a large effect on your posture while using your computer.
  Be sure to optimize the position and orientation of your equipment by following the tips outlined in “Arranging your work area”on page 2-1so you can maintain a comfortable and productive posture. Also, be sure to use the adjustment capabilities of your computer components and office furniture to best suit your preferences now and as your preferences change over time.

• Minor changes in posture can help avoid discomfort: The longer you sit and work in front of your computer, the more important it is to observe your working posture. Avoid as summing any one posture for an extended period of time. Periodically make minor modifications in your posture to help deter any discomforts that might arise. Make use of any adjustments that your office furniture or equipment provide to accommodate changes in posture.

• Short, periodic breaks help ensure healthy computing: Because computing is primarily a static activity, it is particularly important to take short breaks from your work. Periodically, stand up in front of your work area, stretch, walk for a drink of water, or  otherwise take a short break from using your computer. A short break from work gives your body a welcome change in posture and helps to ensure you remain comfortable and productive while you do work.

Accessibility information
Lenovo is committed to providing greater access to information and technology to people with disabilities. With assistive technologies, users can access information in the way most appropriate to their disability. Some of these technologies are already provided in your operating system; others can be purchased through vendors or accessed at: https://lenovo.ssbbartgroup.com/lenovo/request_vpat.php

Adjusting your monitor image
This section describes the user control features used to adjust your monitor image.

Using the direct access controls
The direct access controls can be used when the On Screen Display (OSD) is not displayed.

Table 2-1. Direct access controls

| Icon| Name| Description
---|---|---|---
| | Enter key| •  Press to open main menu while there is no any OSD on the screen.
•  Press to enter next level on main menu or sub menu , or move backwards through the sub menus.
•  Press and hold for 10 seconds to Lock/un-Lock all menu.
| Right key| •  It is a shortcut  for adjusting Color mode while there is no OSD on the screen.
•  Press to enter sub menu.
•  Press to decrease current values on adjustment bar..
| Left Key| •  Press to move backwards through the sub menus.
•  Press to increase current values on adjustment bar.
| Down Key| •  It is a shortcut for changing Contrast setting while there is no OSD on the screen.
•  Press to move lighting-indicator on main menu down to next one.
•  Press to decrease current values on adjustment bar
| Up Key| •  It is a shortcut  for adjusting Brightness while there is no OSD on the screen.
•  Press to move lighting-indicator on main menu up to last one.
•  Press to increase current values on adjustment bar.
| Input Source| It is a shortcut for changing input signal while there is no OSD on the screen or on power-saving  mode.
DDC-CI| Press and hold for 10 seconds to Enable/Disable the “DDC/CI”.
| Power button| Turns the monitor on/off. White indicates power on. Orange indicates standby/ power saving mode.

Using the On-Screen Display(OSD) controls
To adjust the settings, the user controls can be viewed through the OSD.

To use the controls:

1. Press to open the main OSD menu.
2. Use or to move among the icons. Select an icon and press to access the selected function. If there is a sub-menu, you can move between options using or , then press to select that function. Use or to make adjustments then press to save.
3. Press to move backwards through the sub-menus and exit from the OSD.
4. Press and hold for 10 seconds to lock the OSD. This will prevent accidental adjustments to the OSD. Press and hold for 10 seconds to unlock the OSD and allow adjustments to the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key, Press and hold for 10 seconds to disable/enable DDC/CI function. A message “DDC/CI disable” is shown on the screen.
6. The ENERGY STAR option resets all user settings to default values so that the monitor can meet the requirements of Energy Star.

Energy Star is an energy saving program for consumer electronics led by the U.S.
government. It was launched in 1992 by EPA and DOE to reduce energy consumption and greenhouse gas emissions. Energy Star logo is a symbol of energy conservation and environmental protection. It improves the concept of energy efficiency of  consumers and manufacturers, and effectively guides the market.
The regulation of Energy Star improves energy efficiency and reduces air pollution by using more energy-efficient equipment in homes, offices and factories. One way to achieve this goal is to use management to reduce energy consumption when products  are not in use. The default settings for monitors conform to Energy Star certification. Any changes by users for more features and functionalities may increase power consumption, which will exceed the limitation of Energy Star’s standard. If the user  changes the options related to energy efficiency when using, such as brightness, color mode, etc., select All Reset Factory or choose the Energy Star option, the power consumption will be restored to the energy efficiency with Energy Star standard. For more information, please refer to (www.energystar.gov/products).
All products of Energy Star will be posted online and can be accessed directly by governments, public institutions and consumers.

Table 2-2. OSD functions

OSD Icon on Main Menu| Sub menu| Description| Controls and Adjustments
---|---|---|---
Monitor Controls| Brightness| Adjusts overall screen brightness.| All input ports
Contrast| Adjusts difference between light and dark areas.
Dynamic Contrast| •Off
•on
Over Drive| •Off
•Normal
•Extreme
Color Mode
•sRGB| •Neutral
•Warm
•Cool Custom
•R: Increases or decreases the saturation of ‘red’ in the image.
•G: Increases or decreases the saturation of ‘green’ in the image.
•B: Increases or decreases the saturation of ‘blue’ in the image.
Quick settings| Right key| •Brightness
Contrast
•Color mode Automatic
•language| All input ports
Up key
Down key
Port Settings| Input Signal| •Auto
•Disp layPort
•HDMI • VGA| All input ports
DP Select| •DP 1. 2
•DP 1.1| Only for DP ports
Advanced settings| Image Position| •H. Position
•V. Position| Only for VGA ports
Image Setup| •tic
•Automatic
Button repeat rate| •Default
•Slow
•Off| All input ports
As t ratio pec| •Full Screen
•Orginal AR
LED indicator| •On
•Off
Note: When the LED indicator is on, the LED is on; when the LED indicator is off, the LED is always off.|
Power button lock| •On. Off|
Menu settings| Information| Shows resolution, refresh rate, and product ils.
Ndetaote: This screen offers information only, and (does) not allow for setting changes.| All input ports
Language| Select OSD Languages.
Note: The language chosen only affects the language of the OSD.  It has no effect on any software running on the computer.
OSD timeout| To automatically turn off OSD after a preset period of time.
OSD position| Adjusts menu location.
OSD rotation| • Normal
• 90
• 270
Transparency| Adjusts menu transparency.
Factory reset| • Reset
• No

*The use of Extreme Mode (response time) may result in reduced display quality when fast moving video graphics are displayed.
Users should check Extreme Mode (response time) to verify if it is compatible with any applications they would like to use it with.
Low Blue Light: The display uses the low blue light panel. It complies with TÜV Rheinland Low Blue Light Hardware Solution certification under factory reset/default setting (Low Blue Light=Standard, Brightness:75%, Contrast: 75%, CCT: Warm)

Selecting a supported display mode
The display mode of the monitor uses is controlled by the computer. Therefore, refer to your computer documentation on how to change display modes.
The image size, position and shape might be changed when the display mode changes. This is normal and the image can be re-adjusted using automatic image setup and the image controls. Unlike CRT monitors, which require a high refresh rate to minimize  flicker, LCD or Flat Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently configured to a display mode outside the range of this monitor, you may need to reattach the CRT monitor temporarily until you have re-configured the system; preferably to 1920  x 1080 at 60 Hz, which is a common display mode.
The display modes shown below have been optimized at the factory.

Table 2-3 Factory set display modes

Understanding power management
Power management is invoked when the computer recognizes that you have not using your mouse or keyboard for a user-definable period. There are several states as described in the table below.
For optimal performance, switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day.

Table 2-4. Power indicator

State| Power Indicator| Screen| Restoring Operation| Compliance
---|---|---|---|---
On| White| Normal| |
Standby/Suspend| Amber| Blank| Press a key or move the mouse.
There may be a slight delay reappears.
Note: Standby also occurs if there is no  image output to the monitor.| ENERGY STAR
Off| Off| Blank| Press power key to switch on There may  be a slight delay before the image  reappears.| ENERGY STAR

Power Management Modes

VESA Modes| Horizontal Sync| Vertical Sync| Video| Power Indicator| Power Consumption
---|---|---|---|---|---
Normal operation| Active| Active| Active| White| 51 W (maximum)*
14 W (typical)
Active-off mode| Inactive| Inactive| Off| Amber| Less than 0.5 W
Switch off| –| –| –| Off| Less than 0.3 W
Energy Star| Power Consumption
---|---
PON| 13 W
ETEC| 41.6 kWh

Caring for your monitor
Be sure to turn off the power before you perform any maintenance on the monitor.

Do not:

• Apply water or liquid directly to your monitor.
• Use solvents or abrasives.
• Use flammable cleaning materials to clean your monitor or any other electrical equipment.
• Touch the screen area of your monitor with sharp or abrasive items. This type of contact may cause permanent damage to your screen.
• Use any cleaner which contains an anti-static solution or similar additives. This may harm the coating of the screen area.

Do:

• Lightly dampen a soft cloth with water and use this to gently wipe the covers and the screen.
• Remove grease or finger marks with a damp cloth and a little mild detergent.

Detaching the monitor base and stand
Step 1: Place the monitor on a soft and flat surface.
Step 2: Press and hold the stand release button.
Step 3: Lift the stand up and away from the monitor.

Wall Mounting (Optional)
Refer to the instructions that come with the base mounting kit. To convert your LCD display from a desk-mounted to a wall-mounted display, do the following:
Step 1: Verify that the Power button is turned Off, then disconnect the power cord.
Step 2: Lay the LCD display face down on a towel or blanket.
Step 3: Remove the base from the monitor, refer to “Detaching the monitor base and stand”.
Step 4: Attach the mounting bracket from the VESA compatible wall mounting kit (100mm x100mm distance), VESA Mounting Screw M4 x 12 mm.

Step 5: Attach the LCD display to the wall, and follow the instructions in the wall-mounting kit.
For use only with UL Listed Wall Mount Bracket with minimum weight/load: 8kg

Chapter 3.Reference information

This section contains monitor specifications, instructions to manually install the monitor driver, troubleshooting information.

Monitor specifications
Table 3-1. Monitor specifications for type-model T24i-30/63CF-MARX-WW

1.5A
Power consumption
Note: Power consumption figures  are for the monitor and the power supply combined.
Note: Typical power consumption is  tested under OSD default setting.| Normal operation| <51 W (Max)
<14 W (Typical)
Standby/Suspend| <0.5 W
Off| <0.3 W at 100VAC and 240VAC
DP| Interface| DP
Input signal| VESA TMDS (Panel Link™)
Horizontal addressability| 1920 pixels (Max)
Vertical addressability| 1080 lines (Max)
Clock frequency| 170 MHz (Max)
HDMI| Interface| HDMI
Input signal| VESA TMDS (Panel Link™)
Horizontal addressability| 1920 pixels (Max)
Vertical addressability| 1080 lines (Max)
Clock frequency| 170 MHz (Max)
Communications| VESA DDC/CI|
---|---|---
Supported Display Modes| Horizontal frequency| 30 kHz – 83 kHz
Vertical frequency| 50 Hz – 75 Hz
Native Resolution| 1920 x 1080 @ 60 Hz
Temperature| Operating| 0° to 40°C (32°F to 104° F)
Storage| -20° to 60°C (-4°F to 140° F)
Shipping| -20° to 60°C (-4° F to 140° F)
Humidity| Operating| 10% to 80% non-condensing
Storage| 5% to 95% non-condensing
Shipping| 5% to 95% non-condensing

Troubleshooting
If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem.

Table 3-2. Troubleshooting

The words” Out of Range” are shown on the screen, and the power indicator is flashing white.| The system is set to a display mode  which is not supported by  the monitor| • If you are replacing an old monitor, reconnect it and adjust  the display mode to within the  specified range for your new  monitor.
• If using a Windows system,  restart the system in safe mode,  then select a supported display  mode for your computer.
• If these options do not work,  contact the Customer Support Centre.| “Selecting a supported display mode”on page  2-6
The image quality is unacceptable| The video signal cable is not  connected with the monitor or   system completely.| Be sure the signal cable is firmly plugged into the system and  monitor.| “Connecting and turning on your monitor”on  page 1-6
The color settings may be incorrect.| Select another color setting from  the OSD menu.| “Adjusting your monitor image”on page 2-3
The automatic image setup  function was not performed.| Perform automatic image setup.| “Adjusting your monitor image”on page 2-3
The power indicator is not lit and  there is no image.| • The monitor’s power switch is not  switched on.
• The power cord is loose or  disconnected.
• There is no power at the outlet.| • Be sure the power cord is  connected properly.
• Be sure the outlet has power.
• Power on the monitor.
• Try using another power cord.
• Try using another electrical outlet.| “Connecting and turning on your monitor”on  page 1-6
Screen is blank and power indicator is amber.| The monitor is in Standby/ Suspend mode| • Press any key on the keyboard or  move the mouse to restore operation.
• Check the Power options settings  on your computer.| “Understanding power management”on page  2-8
The power indicator is amber, but  there is no image| The video signal cable is loose or  disconnected from the system or monitor| Be sure the video cable is connected with the system properly| “Connecting and turning on your monitor”on  page 1-6
| The monitor brightness and  contrast are at the lowest setting.| Adjust the brightness and contrast  setting on the OSD menu.| “Adjusting your monitor image”on page 2-3
One or more of the pixels appear discolored| This is a characteristic of the LCD  technology and is not an LCD  defect| If there are more than five pixels missing, contact the Support  Center| “Appendix A. Service and Support”on page A-1
• Fuzzy lines in text or a blurryimage
• Horizontal or vertical lines  through the image.| • Image setup has not been optimized
• Your system DisplayProperties setting have not been optimized.| Adjust the resolution settings on  your system to match the native  resolution for this monitor: 1920 x  1080 at 60 Hz.| “Adjusting your monitor image”on page 2-3
Perform automatic image setup.If automatic image setup does not  help, perform manual imagesetup.| “Selecting a supported display mode”on page  2-6
When working in the native resolution, you may find  additional  improvements by  adjusting the Dots Per Inch (DPI)  setting on your system.| See the Advanced section of your system’s  display properties.

Manually installing the monitor driver
Below are steps for manually installing the monitor driver in Microsoft Windows 10, Microsoft Windows 10.

Installing the monitor driver in Windows 10
To use the Plug and Play feature in Microsoft Windows 10, do the following:

1. Turn off the computer, all attached devices.

2. Ensure that the monitor is connected correctly.

3. Turn on the monitor and then the system unit. Allow your computer to start the Windows 10 operating system.

4. From the Lenovo website https://pcsupport.lenovo.com/solutions/t24i__30, find the corresponding monitor driver and download it to a PC to which this monitor is connected (such as a desktop).

5. On the Desktop, move mouse to bottom-left corner of screen, right-click choose Control Panel, then double click the icon of Hardware and Sound, and then click Display.

6. Click the Change the display settings tab.

7. Click the Advanced Settings icon.

8. Click the Monitor tab.

9. Click the Properties button.

10. Click the Driver tab.

11. Click Update Driver, then click Browse the computer to find the driver program.

12. Select Pick from the list of device driver program on the computer.

13. Click the Hard Disk button. By clicking the Browse button, browse and point to the following path:
    X:\Monitor Drivers\Windows 10
    (where X indicates “the folder in which the downloaded driver is located” (such as a desktop)).

14. Select the “lent24i-30.inf” file and click the Open button. Click the OK button.

15. In the new window, select LEN T24i-30 and click Next.

16. After the installation is complete, delete all downloaded files and close all windows.

17. Restart the system. The system will automatically select the maximum refresh rate and corresponding Color Matching Profiles.

Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640 x 480 at refresh rate of 60 Hz.

Installing the monitor driver in Windows 11
To use the Plug and Play feature in Microsoft Windows 11, do the following:

1. Turn off the computer, all attached devices.

2. Ensure that the monitor is connected correctly.

3. Turn on the monitor and then the system unit. Allow your computer to start the Windows 10 operating system.

4. From the Lenovo website https://pcsupport.lenovo.com/solutions/t24i__30, find the corresponding monitor driver and download it to a PC to which this monitor is connected (such as a desktop).

5. On the Desktop, move mouse to bottom-left corner of screen, right-click choose Control Panel, then double click the icon of Hardware and Sound, and then click Display.

6. Click the Change the display settings tab.

7. Click the Advanced Settings icon.

8. Click the Monitor tab.

9. Click the Properties button.

10. Click the Driver tab.

11. Click Update Driver, then click Browse the computer to find the driver program.

12. Select Pick from the list of device driver program on the computer.

13. Click the Hard Disk button. By clicking the Browse button, browse and point to the following path:
    X:\Monitor Drivers\Windows 11
    (where X indicates “the folder in which the downloaded driver is located” (such as a desktop)).

14. Select the “lent24i-30.inf” file and click the Open button. Click the OK button.

15. In the new window, select LEN T24i-30 and click Next.

16. After the installation is complete, delete all downloaded files and close all windows.

17. Restart the system. The system will automatically select the maximum refresh rate and corresponding Color Matching Profiles.

Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz.

Getting further help
If you still can’t solve your problem, please contact the Lenovo Support Center. For more information on contacting the Support Center, please see Appendix A.“Service and Support” on page A-1.

Service information
Customer responsibilities
The warranty does not apply to a product which has been damaged due to accident, misuse, abuse, improper installation, usage not in accordance with product specifications and instructions, natural or personal disaster, or unauthorized alterations, repairs or modifications.
The following are examples of misuse or abuse and not covered by warranty:

• Images burned on to the screen of a CRT monitor. Burned image is preventable by utilizing a moving screen saver or power management.
• Physical damage to covers, bezel, base and cables.
• Scratches or punctures on monitor screens.

Service parts
The following parts are for use by Lenovo service, or Lenovo aurthorized dealers, to support the customer warranty. Parts are for service use only. The table below shows information for model 63CF-MARX-WW.

Table 3-3. Repair parts list (F22238FT0)

FRU (FIELD REPLACEABLE UNIT) PART NUMBER| Description| Machine Type/ Model (MTM)| Color
---|---|---|---
5D11K07910| T24i-30 – 23.8 inch FRU Monitor
(HDMI)| 63CF| Raven Black
5C11K08013| T24i-30 USB Type-A to B cable 1.8m| 63CF| Raven Black
5C11J37841| T24i-30  HDMI cable 1.8m| 63CF| Raven Black
5SE1K07912| T24i-30 – FRU Stand and Base| 63CF| Raven Black

Table 3-3. Repair parts list (A22238FT0)

FRU (FIELD REPLACEABLE UNIT) PART NUMBER| Description| Machine Type/ Model (MTM)| Color
---|---|---|---
5D11K07913| T24i-30 – 23.8 inch FRU Monitor
(HDMI)| 63CF| Raven Black
5C11H81829 (Pick up from T24i_-30)| T24i-30 USB Type-A to B cable 1.8m| 63CF| Raven Black
5C11J07491| T24i-30  HDMI cable 1.8m| 63CF| Raven Black
5SE1K07911| T24i-30 – FRU Stand and Base| 63CF| Raven Black

Appendix A. Service and Support

The following information describes the technical support that is available for your product, during the warranty period or throughout the life of the product. Refer to your Lenovo Statement of Limited Warranty for a fully explanation of Lenovo warranty terms.

Registering your option
Register to receive product service and support updates, as well as free and discounted computer Accessories and content. Go to: http://www.lenovo.com/support

Online technical support
Online technical support is available during the life of your product through the Lenovo Support Web site at http://www.lenovo.com/support
Product replacement assistance or exchange of defective components also is available during the warranty period, assistance for replacement or exchange of defective components is available. In addition, if your option is installed in a Lenovo computer, you  might be entitled to service at your location. Your technical support representative can help you determine the best alternative.

Telephone technical support
Installation and configuration support through the Customer Support Center will be available until 90 days after the option has been withdrawn from marketing. After that time, the support is cancelled, or made available for a fee, at Lenovo’s discretion.
Additional support is also available for a nominal fee.
Before contacting a Lenovo technical support representative, please have the following information available: option name and number, proof of purchase, computer manufacturer, model, serial number and manual, the exact wording of any error message, description of the problem, and the hardware and software configuration information for your system.
Your technical support representative might want to walk you through the problem while you are at your computer during the call.
Telephone numbers are subject to change without notice. The most up-to-date telephone list for Lenovo Support is always available at: http://consumersupport.lenovo.com

Calls made from outside the Sao Paulo region: 0800-701-4815
(Portuguese)
Country or Region| Telephone Number
---|---
Brunei Darussalam| 800-1111 (English)
Canada| 1-800-565-3344 (English, French)
Chile| 800-361-213(Spanish )
China| Technical Support Line:  400-100-6000 (Mandarin)
China
(Hong Kong S.A.R.)| (852) 3516-8977
(Cantonese, English, Mandarin)
China
(Macau S.A.R.)| 0800-807 / (852) 3071-3559
(Cantonese, English, Mandarin)
Colombia| 1-800-912-3021 (Spanish)
Costa Rica| 0-800-011-1029( Spanish )
Croatia| 385-1-3033-120(Croatian)
Cyprus| 800-92537(Greek)
Czech Republic| 800-353-637(Czech)
Denmark| Warranty service and support: 7010-5150 (Danish)
Dominican Republic| 1-866-434-2080(Spanish )
Ecuador| 1-800-426911 (OPCION 4) (Spanish )
Egypt| Primary: 0800-0000-850
Secondary:0800-0000-744
(Arabic, English)
El Salvador| 800-6264 (Spanish)
Estonia| 372-66-0-800
(Estonian, Russian, English)
Finland| Warranty service and support: +358-800-1-4260(Finnish)
France| Warranty service and support (hardware): 0810-631-213(French)
Germany| Warranty service and support: 0800-500-4618 (toll-free)
(German)
Greece| Lenovo Business Partner (Greek)
Guatemala| Dial 999-9190, wait for operator, and request to reach 877-404-9661 (Spanish)
Honduras| Dial 800-0123(Spanish)
Hungary| +36-13-825-716 (English, Hungarian)
India| Primary: 1800-419-4666 (Tata) Secondary: 1800-3000-8465 (Reliance)
Email: commercialts@lenovo.com (English and Hindi)
Indonesia| 1-803-442-425 62 213-002-1090 (Standard Charges Apply)
(English, Bahasa Indonesia)
Ireland| Warranty service and support: 01-881-1444 (English)
Country or Region| Telephone Number
---|---
Israel| Givat Shmuel Service and Center: +972-3-531-3900
(Hebrew, English)
Italy| Warranty service and support: +39-800-820094 (Italian)
Japan| 0120-000-817
(Japanese, English)
Kazakhstan| 77-273-231-427(Standard charges Apply) (Russian , English)
Korea| 080-513-0880 (Collect Call)
02-3483-2829 (Toll Call) (Korean)
Latvia| 371-6707-360(Latvian, Russian, English)
Lithuania| 370 5278 6602(Italian, Russian, English )
Luxembourg| ThinkServer and ThinkStation: 352-360-385-343 ThinkCentre and ThinkPad: 352-360-385-222   (French)
Malaysia| 1-800-88-0013 03-7724-8023 (Standard Charges Apply) (English)
Malta| 356-21-445-566(English, Italian, Maltese Arabic)
Mexico| 001-866-434-2080(Spanish)
Netherlands| 020-513-3939 (Dutch)
New Zealand| 0508-770-506 (English )
Nicaragua| 001-800-220-2282 (Spanish)
Norway| 8152-1550(Norwegian)
Panama| Lenovo Customer Support Center: 001-866-434(Toll-Free)(Spanish)
Peru| 0-800-50-866 (OPCION 2) (Spanish)
Philippines| 1-800-8908-6454 (GLOBE subscribers)
1-800-1441-0719 (PLDT subscribers) (Tagalog, English)
Poland| Laptops and tablets branded with logo Think: 48-22-273-9777
ThinkStation and ThinkServer: 48-22-878-6999
(Polish, English )
Portugal| 808-225-115 (Standard Charges Apply) (Portuguese)
Romania| 4-021-224-4015(Romanian)
Russia| +7-499-705-6204
+7-495-240-8558
(Standard Charges Apply)(Russian)
Singapore| 1-800-415-5529 6818-5315 (Standard Charges Apply)
(English, Mandarin, Bahasa Malaysia)
Slovakia| ThinkStation and ThinkServer: 421-2-4954-5555
Slovenia| 386-1-2005-60 (Slovenian)
Spain| 34-917-147-833(Spanish)
Sri Lanka| +9477-7357-123 (Sumathi Information systems) (English)
Country or Region| Telephone Number
---|---
Sweden| Warranty service and support: 077-117-1040 (Swedish)
Switzerland| Warranty service and support: 0800-55-54-54 (German, French, Italian)
Taiwan| 0800-000-702 (Mandarin)
Thailand| 001-800-4415-734
(+662) 787-3067 (Standard Charges Apply)(Thai, English)
Turkey| 444-04-26 (Turkish)
United Kingdom| Standard warranty support: 03705-500-900 ( local rate) Standard warranty support: 08705-500-900(English)
United States| 1-800-426-7378 (English)
Uruguay| 000-411-005-6649 (Spanish)
Venezuela| 0-800-100-2011 (Spanish)
Vietnam| 120-11072 (Toll Free)
84-8-4458-1042 (Standard Charges Apply) (Vietnamese, English)

Appendix B.Notices

Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product,  program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead.  However, it is the user’s responsibility to evaluate and verify the operation of any other product, program, or service.
Lenovo may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing to:

Lenovo (United States), Inc.
1009 Think Place – Building One
Morrisville, NC 27560
U.S.A.
Attention: Lenovo Director of Licensing

LENOVO PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR  FITNESS FOR A PARTICULAR PURPOSE.
Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.
This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. Lenovo may make improvements and/or changes in  the product(s) and/or the program(s) described in this publication at any time without notice.
The products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons.
The information contained in this document does not affect or change Lenovo product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Lenovo or third  parties. All information contained in this document was obtained from specific environments and presented as an illustration. The result obtained in other operating environments may vary.

Recycling information
Lenovo encourages owners of information technology (IT) equipment to responsibly recycle their equipment when it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners in recycling their IT products. For information  on recycling Lenovo products, go to:

http://www.lenovo.com/recycling

Collecting and recycling a disused Lenovo computer or monitor
If you are a company employee and need to dispose of a Lenovo computer or monitor that is the property of the company, you must do so in accordance with the Law for Promotion of Effective Utilization of Resources. Computers and monitors are categorized  as industrial waste and should be properly disposed of by an industrial waste disposal contractor certified by a local government. In accordance with the Law for Promotion of Effective Utilization of Resources, Lenovo Japan provides, through its PC Collecting and Recycling Services, for the collecting, reuse, and recycling of disused computers and monitors. For details, visit the Lenovo Web site at https://www.lenovo.com/jp/ja/services_warranty/recycle/pcrecycle/. Pursuant to the Law for Promotion of Effective  Utilization of Resources, the collecting and recycling of homeused computers and monitors by the manufacturer was begun on October 1, 2003. This service is provided free of charge for home-used computers sold after October 1, 2003. For details, visit the  Lenovo Web site at https://www.lenovo.com/jp/ja/services_warranty/recycle/personal/.
Disposing of Lenovo computer components
Some Lenovo computer products sold in Japan may have components that contain heavy metals or other environmental sensitive substances. To properly dispose of disused components, such as a printed circuit board or drive, use the methods described above  for collecting and recycling a disused computer or monitor.

Trademarks
The following terms are trademarks of Lenovo in the United States, other countries, or both:
Lenovo
The Lenovo logo
ThinkCentre
ThinkPad
ThinkVision
Microsoft, Windows, and Windows NT are trademarks of the Microsoft group of companies.
Other company, product, or service names may be trademarks or service marks of others.

Power cords and power adapters
Use only the power cords and power adapters supplied by the product manufacturer. Do not use the AC power cord for other devices.

References

• Energy Efficient Products | ENERGY STAR
• Lenovo Official US Site | Laptops, PCs, Tablets & Servers | Lenovo US
• lenovo.com/healthycomputing/
• Registration - Lenovo Support US
• Regulatory Compliance | Personal Computer Safety | Lenovo US
• Lenovo Support | Drivers, Troubleshooting, Warranty, Repair | Lenovo Support US
• Lenovo Support | Drivers, Troubleshooting, Warranty, Repair | Lenovo Support US
• Monitors Accessories - Reference Guide - Lenovo Support US
• Page Not Found - Lenovo Support US
• ThinkVision T24i-30 - Overview - Lenovo Support US

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>