EAST OAK RS01SR2 Heat Focusing Reflector for Patio Heater Owner’s Manual

EAST OAK RS01SR2 Heat Focusing Reflector for Patio Heater

Specifications

• Model: RS01SR2
• Brand: East Oak
• Warranty: 3-year warranty

Product Usage Instructions

1. Panel and Bracket Assembly:
   Use 6 M6 screws to fix 3 brackets on the panel. Ensure the M6 screws are on the front side of the panels. The side of the bracket with the hole should be at the bottom.

2. Fixing Protective Covers:
   Pass the 3 fixed screws through the bracket holes and attach the 3 protective covers. Do not tighten the protective covers too tightly to allow space for the next installation step.

3. Attaching Support and Deflector:
   Unscrew the two screws from the heater. Assemble the support to the deflector and fix them with screws. Ensure the support is on the opposite side of the control knob.

4. Attaching Deflector to Heater:
   Attach the deflector to the heater reflector using fixed screws. Fasten the protective covers onto the fixed screws. Ensure the support rods are fixed in the middle of the deflector.

5. Attaching Support to Heater:
   Assemble the support to the heater using screws. Make sure the deflector is on the opposite side of the control knob after assembly.

FAQ:

• Q: How do I claim the product warranty?
  A: To claim your product’s warranty, register your new product on our website at www.eastoak.com/warranty.

• Q: What should I do if any parts are missing?

• A: If any parts are missing, please contact our customer support at support@eastoak.com or call 1-833-EAST-OAK (USA) for assistance.

NOTES

• Please check all parts and components to ensure no damage or missing items before starting the product’s construction. If you have any problems or discover any missing parts, please contact customer service at support@eastoak.com.

WARRANTY POLICY

GUARANTEED 3-YEAR WARRANTY
Thank you for choosing East Oak. This product is covered by our company warranty for up to 3 years from its original purchase date.
CLAIM WARRANTY
If you’d like to claim your product’s warranty, register your new product on our website at www.eastoak.com/warranty.

PARTS  LIST

Assembly Instructions

1. Use 6 M6 Screws to fix 3 brackets on the panel. The M6 screws should be on the front side of the panels.
   TIPS : The side of the bracket with the hole is on the bottom, as shown in the picture.

2. Pass the 3 fixed screws through the holes of the brackets, and screw the 3 protective covers on. TIPS : It is recommended not to tighten the protective cover too tightly. There is a little space between the protective cover and the brackets, which is convenient for the next step of installation.

3. Unscrew the two screws from the heater. Assemble the support to the deflector and fix them with a screw.
   TIPS : Please make sure the support is on the opposite side of the control knob.

4. Attach the deflector to the heater reflector with fix screws. Then fasten the protective covers onto the fix screws. Link the assembled deflector to the patio heater.
   TIPS : The support rods should be fixed in the middle of the deflector.

5. Assemble the support to the heater with screws.
   TIPS : After assembly please make sure the deflector is on the opposite side of control knob.

support@eastoak.com eastoak.com
1-833-EAST-OAK (USA)

References

• East Oak / Patio life elevated

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>