EAST OAK PCL23001 Outdoor Chaise Lounge Owner’s Manual

EAST OAK PCL23001 Outdoor Chaise Lounge

IMPORTANT CAUTION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents. If any part is missing or damaged, do not attempt to assemble the product. If any part is missing or damaged, please contact customer service at support@eastoak.com.

• To obtain the longest lifespan of lounge chair, minimizing exposure to direct sunlight is recommended.
• When using the lounge chair in summer sun, do not touch the high temperature iron surface.
• Do not use harsh cleaners and disinfectants to clean textilene.
• Please clean the lounge chair in time after use or being exposed to rain.
• Some parts may contain sharp edges. Wear protective gloves if necessary during assembly.
• When using power tools, please adjust the gear to the minimum. Otherwise, it will cause damage to the parts.
• The Small Side Table has a weight limit of 11 lbs. Do not sit on it.
• Children should not climb or jump on the furniture.

SAFETY GUIDE

• For your safety and to reduce the risk of severe personal injury, the user must read and understand this Safety Guide.
• Assemble each piece only following the instructions. Using tools or hardware not included in the original packaging, or improperly assembly may cause the product to malfunction or has a risk of severe personal injury.
• Assemble on a plat and soft surface, such as carpeting, to avoid scratches or damage.
  

NOTICE

• Tighten all bolts and screws again within the first two weeks of assembly.
• Check the tightness of all bolts every two months, tighten them if necessary.

CARE & CLEANING

• To obtain the longest lifespan of lounge chair, clean the frame and cushion with a damp towel, and then dry the lounge chair thoroughly, this will remove dirt particles and prevent mildew.
• Do not clean the lounge chair with abrasive materials, bleach, or solvents.
• Store the lounge chair in a dry, sheltered place when not in use.
• Keep the lounge chair out of the fire, extreme heat, freezing conditions, and inclement weather such as rain, hail, snow, or wind.
• PLEASE NOTE that the metal paint may come off due to weather conditions.
• It is recommended to wipe the recliner with a damp cloth after use or rain to prevent stains and waterlogging (waterlogging is because textiline cloth is denser, in order to enhance the strength of the cloth, there is a loss of gap drainage).
• This Lounge is NOT a TOY. Keep your child / children at bay during the assembly process.

READ & SAVE BELOW INSTRUCTIONS BEFORE ASSEMBLY

1. Please separate and identify all parts, making sure that you have all of the parts listed.
2. To avoid any scratch during assembly, please assemble on a soft mat or similar.
3. Please assemble step by step and follow the instructions.
4. Washers must be used.
5. Do not completely fasten each screw and nut until all the screws are properly fixed.

PARTS LIST

• **Seat Frame
  A (1PC)

**

• **Leg of the Lounger
  B (4PCS)

**

• **Connecting Pipe of the Small Table
  C (1PC)

**

• **Small Side Table
  D (1PC)

**

• *M612 Screw
  E (20PCS)+Spare Part(X1)
  **

• *M635 Screw
  F (1PC)+Spare Part(X1)
  **

• Washer
  G (21PCS)+Spare Part(X2)
  

• Wrench
  H (1PC )

ASSEMBLE THE LEGS OF THE LOUNGER

Align the screw holes on the lounger seat and the legs and install the 4 legs on the lounger seat with washer G and screw E. Do not completely tighten all the screws before all screws are inserted to the screw hole.

ASSEMBLE THE SMALL SIDE TABLE

Align the hole position and install the washers and screws with a wrench, but don’t completely tighten them until the 2 screws for this part are pre- installed.

CONNECT THE SMALL TABLE TOP TO THE LOUNGER

Align the hole position and install the washers and screws with a wrench, but don’t completely tighten them until the 3 screws for this part are pre- installed.

HEIGHT ADJUSTMENT METHOD

Adjust the height by rotating the foot pad horizontally when the ground is uneven.

FEATURES

• More materials make for a more solid, stronger texture that can hold up to 396 lbs
• Large size, ergonomic and comfortable
• The backrest height can be adjusted; adjust the height based on your own needs
• Aluminum frame and iron frame processed by electrophoresis process, with strong anti-rust ability
• Tesla cotton cushion has good breathability and heat dissipation, with good antifouling performance, and is easy to clean and maintain
• Easy to assemble, with a lightweight frame that can be moved anywhere for sunbathing
• With a small table, it is convenient to place books and drinks

WHAT’S IN THE BOX

• 1 x Seat Frame
• 4 x Lounger Leg
• 1 x Connecting Pipe for the Small Table
• 1 x Small Side Table
• 1 x Accessory Kit
• 1 x Owner’s Manual

WARRANTY POLICY

GUARANTEED 3-YEAR WARRANTY
Thank you for choosing East Oak. This product is covered by our company warranty for up to 3 years from its original purchase date.

CLAIM WARRANTY
If you’d like to claim your product’s warranty, register your new product on our website at www.eastoak.com/warranty

CUSTOMER SUPPORT

Questions? Comments?
Reach out to us for expert support!

support@eastoak.com
eastoak.com
1-833-EAST-OAK (USA)
**(1-833-327-8625) Mon-Fri 8am-8pm EST
Follow eastoakliving on

Claim your 3-year warranty
at eastoak.com/warranty

Please scan the QR code to view the installation video**

Documents / Resources

| EAST OAK PCL23001 Outdoor Chaise Lounge [pdf] Owner's Manual
PCL23001, PCL23001 Outdoor Chaise Lounge, Outdoor Chaise Lounge, Chaise Lounge, Lounge
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>