GAIATOP HW-02 Hand Warmers User Manual
- June 17, 2024
- GAIATOP
Table of Contents
Hand Warmer
HW-02
User Manual
Product Parameters
Product Name: Hand Warmer
Product Model: HW-02
Input: 5V/1A
Battery Capacity: 2000mAh
Charging Time: About 2.5 hours
WarmingTime: About 3 hours
Warming Temperature: About 122°F-131°F
Material: ABS, PC, Aluminum, Silicone
Input Port: Tyoe-C
Size: 60.560.522mm/2.42.40.9in
Packing List: Hand warmer 1, Type-C charging cable
1, User manual 1, Silicon hand strap 2
Product Descriptions
The product has the characteristics of hand warmer function. It has built-in
over-current, over-voltage, over-temperature, short-circuit protection and
other multiple security protection circuits.
Operation Instructions
Using The Unit As A Warmer
- Long press the Power Button for 3s, the LED light of switch will show in red for 2s, it means the unit is warming up and the surface temperature will reaches 122°F-131°F.
- Long press the Power Button again for 3s to turn off the unit, and the LED light on the switch will display green for 2s.
Using The Unit As A LED Torch Light
- Short press the Power Button, the LED torch light will turn on.
- Short press the Power Button again, the LED torch light will turn off.
Charging The Unit
- Please fully charge the unit before using it for the first time.The charging voltage is 5V/1A.
- Charge the unit with the USB cable from computer or USB socket AC; the charging LED will show in red color during charging.
- When the red charging LED Indicator turns to green color, it means the charging is finished.
- If the LED light turns red and flashes three times, the unit is in low power.
- For a better battery performance, it is recommend- ed to recharge the appliance after the battery is exhausted.
- Always place the appliance in a safe and flat surface to charge.
- Do not charge the unit under a cover or inside the carrying pouch, it may cause overheating.
- Do not charge the unit over the recommended period, it will shorten life-span of the battery or may cause explosion.
Notes:
- The warmer and LED torch light can be used in the same time.
- The unit will not operate when charging is in process.
- Stop using the warmer if erythema, itch, blain is detected.
Use Environments
Use ambient temperature: Non-tropical area below O°F to 104°F.
Storage ambient temperatures: 0°F to 104°F degrees Celsius.
Remarks: Product performance (operating time & surface temperature) varies in
different environments.
Cautions
- This appliance is for warming and LED light purposes only; do not use for any purpose other thandescribed in this manual.
- Do not dispose of the appliance in fire, the Li-ion battery may cause explosion.
- Do not immerse the USB cord and the unit into water.
- Do not store the appliance in hot environment. High temperature may shorten the life span of the appliance or damage the battery.
- Do not disassemble the appliance by yourself.
- Do not put the appliance inside or next to a microwave oven, oven or other high temperature equipment, this may cause fire or explosion.
- Do not use the appliance near explosive or inflammable materials; it may cause fire or explosion.
- Do not use the appliance in bathroom or wet and damp areg; this may damage the appliance.
- Always keep the appliance dry.
- Do not use the appliance with unoriginal parts or accessories.
- Stop using or charging the appliance if strange odor, overheating is detected.Take the appliance tothe repairing centre for examination.
- If battery leakage is detected, stop using the appliance.Avoid contacting the liquid with eyes andskin.
- If the appliance is damaged, it must be repaired by the manufacturer, its service agent or a similarly qualified person to avoid hazard.
- Do not use chemicals, cleaning solvents or strong detergents to clean the appliance.Use a soft dry cloth to clean the surface of the unit.
- If the unit is not in use for a long period, fully charge it and store it in a cool, dry place.Keep it away from children.
- This appliance is not intended for use by children or other persons without assistance or supervision if their physical, sensory or mental capabilities prevent them from using it safely. Children should be supervised to ensure that they do not play with the appliance.
Name: Prolinx Global LTD
Add: 27 Old Gloucester Street, London, WCIN 3AX, UK
Contact person: Mr. Nianzhuang Liu
Tel/fax 0044 20 39661193
E-mail: eu@eulinx.Eu
Name: Prolinx GmbH
Add: Brehmstr 56, 40239, Dusseldorf
Contact person: Jie Xue
Tel/fax. 0049 2n 3105 4698
E-mail: eu@eulinx.Eu
© Manufacturer: Shenzhen Gaiatop Network Technology Co., Ltd.
All Rights Reserved / Designed by Gaiatop
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>