GAIATOP K-116 Space Heater Instruction Guide
- June 8, 2024
- GAIATOP
Table of Contents
GAIATOP K-116 Space Heater
Consider this: it’s a cold winter night, and you’re snuggling on your couch with your loved ones in the toasty environment created by our heater in a matter of seconds. A programmable 24-hour timer is included with our multipurpose space heater. Rather than gritting your teeth while waiting for the room to heat up, have a warm room wait for you. Our tower space heater can be installed both vertically and horizontally.
Please use your heater with confidence; the fireproof materials and intelligent overheat protection feature will keep you and your loved ones safe. Don’t leave the warmth and comfort of your bed to adjust the room’s temperature. Take advantage of the Aikope indoor heater’s remote control and avoid moving an inch. We made certain that your space heater is not only fast and dependable, but also energy-efficient. This ECO mode will help keep your home warm while lowering your utility bills.
- PRODUCT NAME PTC Ceramic Heater
- BRAND GAIATOP
- RATED VOLTAGE 110 V~ 120 V
- RATED POWER 1000 w
- PRODUCT WEIGHT 5 Ounces
- PRODUCT MODEL K-116
- RELATED FREQUENCY 60 Hz
- PACKING SIZE 1×6.8×7.4in
- OVERALL WEIGHT 4 Ounces
PRODUCT INTRODUCTION
The series heaters produced by our company are designed according to the advanced foreign technology, combined with the needs of domestic users, with the features such as simple operation, attractive appearance, deft design, reasonable internal layout, compact structure, safe and reliable, fast heating, low power consumption, is the ideal warming appliance for homes and offices.
PRODUCT MIX
- Grid Guard
- Housing
- Wooden Tripod
- Skidproof Rubber Pad
- Rear Grid Guard
- Power Switch
- Shift Switch
- Gear indicator
INSTALLATION MODE
FUNCTION CHARACTERISTICS
- Delicate structure, attractive appearance.
- Advanced PTC ceramic heating element, high electrothermal conversion efficiency, no open flame, fast warming, safe and reliable, and can automatically reduce the input power with the continuous rising of indoor temperature to achieve energy saving effect.
- Mechanical switch and electronic switch combined control, easy and convenient operation.
- Shift function: the three gears are controlled at will, both warm and cold air are all applicable.
- The default working time of the product is 6 hours, and it will power off automatically after 6 hour.
USAGE
Please insert the power plug into the socket with voltage of 110 V- 120 V before use
- STEP 1 Turn on the back-power switch, energize the whole machine and enter the standby state.
- STEP 2 Press the top gear switch to enter the first gear natural wind mode (this mode is not heated, corresponding to the work indicator light– blue light–is always on).
- STEP 3 Press the top gear switch again and enter the medium temperature hot air mode (in this mode, enter the medium temperature constant temperature hot air state, the average heating power is 500W, the natural wind indicator is off, and the medium temperature corresponding indicator- red light — is always on).
- STEP 4 Press the top gear switch for the third time to enter the high-grade hot air mode (the maximum power under this mode is 1000W, the medium temperature indicator is off, and the indicator corresponding to high temperature– red light — is always on).
- STEP 5 Press the gear switch again to enter the heat dissipation mode (in this mode, the high temperature indicator flashes, and the heater is heated under the closed state to blow out natural wind). When the temperature of the heating coil drops below 60 degrees, or the maximum heat dissipation is 10 seconds, it will automatically extinguish and enter the standby state.
- STEP 6 Turn off the back-power switch and the heater stops working.
NOTE
in the working state, the heater is topple and fall at an angle of more
than 45 degrees, or upside down. Automatically turn off the heating and
blowing immediately, while 3 LED lights flash at the same time.
CAUTIONS
- When using it for the first time, please check whether the power supply you use conforms to the requirements of the product, and make sure that the socket you use is well grounded. Note that the rated current of the socket should be more than 10A.
- This product is strictly prohibited to be used in the environment with inflammable and explosive articles, and is strictly prohibited to be used in the environment with severe dust and oil pollution, and the ambient temperature should not exceed 30°C.
- Do not use this heater around bathtub, shower head or swimming pool.
- Do not cover the heater. Do not bake on the heater to prevent fire.
- When cleaning maintenance, first unplug the power plug, until the body cooling can be carried out.
- When the end of use, going out or no use for a long time, first turn off the power switch, and then unplug the power plug.
- If the power cord is damaged, it must be replaced by a professional from the manufacturer, its maintenance department or similar department to avoid danger.
- The heater must be placed on a flat floor or table top for use.
- It is forbidden to touch the protective screening cover when the heater is working to prevent high temperature scald; Pay special attention to children.
- To extend the life of the product, do not move the heater when heating.
- If the heater is covered or improperly placed, it will cause a fire. Therefore, it is not allowed to use the heater with a programmer, timer or any other device that can automatically switch on the power supply.
- Do not use wet hands to operate the heater switch or pull out the power cord plug, in case of electric shock.
- Protective covers do not provide overall protection for children or the disabled; Children should be supervised to ensure that they do not play with the heaters. This product is only suitable for indoor use. Do not use it outdoors.
- The heater shall not be placed directly under the power outlet for use, and shall not be directly facing the outlet or other flammable materials.
- Do not bend, pull or tangle the power cord in case its overheating.
- This product is not suitable for use by persons with physical, sensory or intellectual disabilities or who lack experience and common sense, unless Someone else can ensure their safety and supervise them.
- Remove the power plug before moving, and do not move until the body cools. Be careful when moving. Do not directly pull the power cord to move the body.
- This product should not be placed next to curtains and indoor furniture. It should be placed more than 50cm away from the wall and furniture. The top of the product should not be blocked within 50cm to facilitate air circulation.
- Do not use and store in damp and dusty places for a long time, so as not to cause shell corrosion or cause leakage of electricity, inductance and other accidents due to moisture.
- Do not randomly decompose the body or modify the product in any way to avoid danger.
- It is normal for the product to make a slight noise when the power is switched on.
A WARNING: to avoid overheating of the body, do not cover the heater with foreign matter.
MAINTENANCE
- Do not approach the open fire, so as to avoid discoloration and deformation of the body.
- Clean the air inlet and outlet grille regularly to avoid blockage.
- Use a soft cloth with neutral detergent to remove dirt from the surface, then dry with a dry cloth.
Frequently Asked Questions
Are you a factory or trading company?
We are a factory.
Where is your factory located? How can I visit there?
Our factory is located in Shenzhen, China. You can fly to Shenzhen airport directly. All our clients, from home or abroad, are warmly welcome to visit us!
What is your main product?
Our main products are ceramic heater and electric heater.
What is your MOQ?
Our MOQ is 1 piece for each model.
Can you accept OEM service?
Yes, we can accept OEM service.
What makes this heater portable?
you can take its legs, it will be more portable.
I ordered two and neither one will turn on after I’ve plugged them in, do they need to “charge up” a bit first?
I’ve noticed the safety features are touchy. If the bottom leg pieces are not on correctly then it would not allow machine to turn on. Be careful which leg you place where on heater during assembly because one leg is shorter than the other two. Try moving legs around and giving it another shot if all 3 lights are blinking.
Is it safe to use in a room in the basement?
It doesn’t get any room very warm, only direct contact on something.
In what country is the gaiatop ptc ceramic space heater manufactured?
China
The heater is not staying on heat why?
I’ve never written a review. But this product is garbage. Don’t buy it. Won’t even stay on
Mine keeps turning off when we use it at night. Is that supposed to happen? I don’t see a timer mentioned in the description.
It does shut off after 6 hours. I actually prefer that so I don’t have to keep track of it in the mornings.
Does this heater glow when hot? I’d like to keep my room dark while it’s on.
It does not glow. Great heater!
Wrong size legs received
Simply do an exchange! Send product back in packaging free more the issue on the app as well!
Can this run on batteries?
No, it does not have a battery compartment as far as I can tell
Top lights blinking and will not tune on?
Try pressing the round button on top a few times. It cycles through all three lights blinking first, press the button again for the fan function, then press for low heat, and press for high heat. The lights on top will indicate which function it is on. If it doesn’t do this then it’s broken and send it back.
Video
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>