ICY BOX IB-DK4061-CPD Mobile USB Type-C Notebook DockingStation User Manual
- June 17, 2024
- ICY BOX
Table of Contents
ICY BOX IB-DK4061-CPD Mobile USB Type-C Notebook DockingStation User Manual
Please read carefully the following information to prevent injuries, damage to material and device as well as data loss:
Warning levels
Signal words and safety codes indicate the warning level and provide immediate information in terms of the probability of occurrence as well as the type and severity of the consequences if the measures to prevent hazards are not complied with.
DANGER
Warns of a directly hazardous situation causing death or serious injury.
WARNING
Warns of a potentially hazardous situation that may cause death or serious
injury.
CAUTION
Warns of a potentially hazardous situation that may cause minor injury.
IMPORTANT
Warns of a potential situation that may cause material or environmental
damage and disrupt operative
processes.
Risk of electrical shock
WARNING
Contact with parts conducting electricity Risk of death by electrical shock
- Read the operating instructions prior to use
- Make sure the device has been de-energised prior to working on it
- Do not remove contact protection panels
- Avoid contact with conducting parts
- Do not bring plug contacts in contact with pointed and metal objects
- Use in intended environments only
- Operate the device using a power unit meeting the specifications of the type plate only!
- Keep the device/power unit away from humidity, liquid, vapour and dust
- Do not modify the device
- Do not connect the device during thunderstorms
- Approach specialist retailers if you require repairs
Hazards during assembly (if intended) Sharp components
CAUTION
Potential injuries to fingers or hands during assembly (if intended)
- Read the operating instructions prior to assembly
- Avoid coming into contact with sharp edges or pointed components
- Do not force components together
- Use suitable tools
- Use potentially enclosed accessories and tools only
Hazards caused by a development of heat Insufficient device/power unit ventilation
IMPORTANT
Overheating and failure of the device/power unit
- Prevent externally heating up components and ensure an exchange of air
- Do not cover the fan outlet and passive cooling elements
- Avoid direct sunlight on the device/power unit
- Guarantee sufficient ambient air for the device/power unit
- Do not place objects on the device/power unit
Hazards caused by very small parts and packaging Risk of suffocation
WARNING
Risk of death by suffocation or swallowing
- Keep small parts and accessories away from children
- Store/dispose of plastic bags and packaging in an area that is inaccessible to children
- Do not hand over small parts and packaging to children
Potential data loss Data lost during commissioning
IMPORTANT Potentially irreversible data loss
- Always comply with the information in the operating instructions/quick installation guide
- Exclusively use the product once the specifications have been met
- Back up data prior to commissioning
- Back up data prior to connecting new hardware
- Use accessories enclosed with the product
Cleaning the device Harmful cleaning agents
Scratches, discolouration, damage caused by moisture or short circuit in the device
- Disconnect the device prior to cleaning
- Aggressive or intense cleaning agents and solvents are unsuitable
- Make sure there is no residual moisture after cleaning
- We recommend cleaning devices using a dry, anti-static cloth
Disposing of the device Environmental pollution, unsuitable for recycling
Potential environmental pollution caused by components, recycling circle interrupted This icon on product and packaging indicates that this product must not be disposed of as part of domestic waste. In compliance with the Waste Electrical and Electronic Equipment Directive (WEEE) this electrical device and potentially included batteries must not be disposed of in conventional, domestic waste or recycling waste. If you would like to dispose of this product and potentially included batteries, please return it to the retailer or your local waste disposal and recycling point.
If you have any questions, please do not hesitate to contact our support at support@raidsonic.de or visit our website at www.icybox.de.
Manual IB-DK4061-CPD
Package content
1x IB-DK4061-CPD, 1x manual
View
-
USB 3.2 Gen 1 Type-C® host computer interface
-
HDMI® 1: HDMI® 2.1 interface with up to 7680×4320@30 Hz
-
USB 2.0 Type-A interface, data transfer rates up to 480 Mbit/s and 5 V/0.5 A charging support
-
USB 3.2 Gen 1 Type-C® interface, data transfer rates up to 5 Gbit/s and 5 V/0.9 A charging support
-
USB Type- C® PD 3.0 interface with Power Delivery support up to 100 watts (no data transfer)
-
USB 3.2 Gen 1 Type-A interface, data transfer rates up to 5 Gbit/s and 5 V/0.9 A charging support
-
USB 3.2 Gen 1 Type-A interface, data transfer rates up to 5 Gbit/s and 5 V/0.9 A charging support
-
USB 2.0 Type-A interface, data transfer rates up to 480 Mbit/s and 5 V/0.5 A charging support
-
SD 2.0 card reader, data transfer rates up to 25 MB/s microSD 2.0 card reader, data transfer rates up to 25 MB/s
-
Gigabit LAN interface with up to 10/100/1000 Mbit/s
-
HDMI® 1: HDMI® 1.4 interface with up to 3840×2160@30 Hz
-
3.5 mm headset jack
Legacy USB standards| Current USB standards| Data transfer rat
e
---|---|---
USB 3.0 = USB 3.1 (Gen 1)| = USB 3.2 Gen 1| = 5 Gbit/s
USB 3.1 = USB 3.1 (Gen 2| = USB 3.2 Gen 2| = 10 Gbit/s
USB 3.2 (Gen 2×2)| = USB 3.2 Gen 2×2| = 20 Gbit/s
| = USB4® Gen 3×2| = 40 Gbit/s
Requirements
- Windows®, macOS®, Chrome OS™
- DisplayPort™ Alt Mode and Power Delivery support required!
- Supports MST (Multi Stream Protocol) for Windows® based computers (macOS® based computers only support SST (Single Stream Protocol))
- The device is compatible with Thunderbolt™ 3/4/USB4® Type-C® equipped computers
- Multi-LUN card readers – allow the use of two cards simultaneously
- No power supply included (only necessary for Power Delivery)
USB Type-C®
Not all USB Type-C® host ports support the full functionality of the USB
Type-C® standard. Some ports might only provide data transfer without
supporting Power Delivery or DP Alt Mode over USB.
To use this dock to its full potential, make sure that the USB Type-C® host
port of
USB Type-C™ ≠ USB Type-C™
Important!
This ICY BOX product requires the usage of DisplayPort™ Alt Mode
technology over the USB Type-C™ connector. Not all computers, notebooks or
tablets with a USB Type-C™ interface support the DisplayPort™ Alt Mode.
Please check the specifications of your computer system as well as its USB
Type-C™ interface or use the ICY BOX product with a Thunderbolt™ 3 connector.
your computer supports USB Power Delivery and DP Alt Mode or Thunderbolt™ 3/4/USB4®.
Please consult your host PC documentation or contact the PC manufacturer to confirm compatibility with these technologies. For safety, check whether the host PC Bios Version is the latest and confirm compatibility with USB Type-C® Power Delivery and/or DP Alt Mode before application.
Starting up
-
Connect the USB Type-C® cable to the supported USB Type-C® interface of your computer.
-
Connect your devices to the corresponding interfaces of the dock.
Use of memory card slots
SD card
Insert the SD card into the SD card slot with the bevelled corner first. The
golden PINs of the card must show downwards (ICY BOX logo at the top).
microSD card
Insert the microSD card into the microSD card slot with the bevelled corner
first. The golden PINs of the card must show upwards (ICY BOX logo at the
top).
Multi-LUN card readers allow the use of two cards simultaneously
Configure a display device
Please set up your display settings according to your operating system and
requirements.
For detailed information refer to the corresponding operation manual and
description of your operating system.
Note: Video output capabilities are dependent on the video graphics card
and
hardware specifications of your connected host computer. Certain video
graphics cards and operating systems have limited MST and DisplayPort™
support, while some monitors will also limit the available resolution.
Supported video resolutions
The IB-DK4061-CPD supports 8K resolutions if the connected displays and the
graphics unit support it.
Supported video resolutions
Video matrix (Host PC = USB Type-C® DP Alt Mode, DP 1.2), maximum resolutions (Windows)
| Inputs (plug-in)| Output
Number of displays| HDMI® 1| HDMI® 2| HDMI® 1| HDMI® 2
Dual video output| ✓| ✓| 920×1080@60 Hz| 1920×1080@60 Hz
Single video output| ✓| | 3840×2160@30 Hz|
| ✓| | 3840×2160@30 Hz
Video matrix (Host PC = USB Type-C® DP Alt Mode, DP 1.4, DSC), maximum resolutions (Windows)
| Inputs (plug-in)|
Output
Number of displays
| HDMI® 1| HDMI® 2| HDMI® 1| HDMI® 2
Dual video output| ✓| ✓| 920×1080@60 Hz|
1920×1080@60 Hz
Single video output
| ✓| | 3840×2160@30 Hz|
| ✓| |
3840×2160@30 Hz
Video matrix (Host PC = USB Type-C® DP Alt Mode), maximum resolutions (macOS)
| Inputs (plug-in)|
Output
Number of displays
| HDMI® 1| HDMI® 2| HDMI® 1| HDMI® 2
Dual video output| ✓| ✓| 920×1080@60 Hz|
1920×1080@60 Hz
Single video output
| ✓| | 3840×2160@30 Hz|
| ✓| |
3840×2160@30 Hz
Windows® display configuration
NOTE: The screenshots might vary slightly with the operating system.
Extended monitor application under MST technology (MultiStreamTransport protocol)
Arrange your displays
Once the extra monitors are connected, they can be configured to either mirror
mode, extended mode or be configured to the setting of the primary display.
e.g: extending your monitors
-
* Position the mouse anywhere on the Windows® desktop-
Right-click and select Display settings to bring up the configuration window.
-
Refer to the Display configuration section
-
Identify your monitors by clicking the Identify button.
-
Select the relevant monitor for the following settings by clicking the identified monitor symbol
-
Select Multiple displays > Extend desktop to this display if you wish to extend a monitor.
-
Click Keep changes to confirm and exit.
-
Once the setting is completed, simply drag and drop the application icons to arrange your monitors.
(However, some applications may not support the display on the extended desktop)
-
Setting the right resolution and frequency of your displays
There are two possibilities to choose the resolution of the selected monitor:
-
Standard
-
Identify your monitors by clicking the Identify button.
-
Select the relevant monitor by clicking the identified monitor symbol.
-
Click on Display resolution
-
Choose the right resolution from the drop-down menu. Refer to the video matrix table!
-
Click Keep changes to confirm and exit.
-
-
Advanced display settings
-
Identify your monitors by clicking the Identify button.
-
Click on Advanced display settings.
-
A new page opens up
-
Select the relevant monitor by clicking Choose display
-
Click on Display adaptor properties for Display X.
-
A new window opens up
Click on List All Modes
A new window opens up
Click on a valid mode according to your demands.
Repeat for each attached monitor if necessary.
macOS® Display configuration
Once the extra monitors are connected, they can be configured to mirror mode
or extend mode.
Click on System Preferences
Click on Displays
A new window opens up
Click Arrangement.
Select the corresponding monitor symbol by clicking and holding the symbol of
the monitor that shall be placed in order to do the positioning.
To set up scaled resolutions of the monitor displays, click the Display tab.
In the window that now opens for the respective display, you can set your
desired resolutions separately. Select the option Scaled and then select the
appropriate size in the field below.
Advanced display settings
Hold down the option key and click on Scaled again and an advanced menu for
setting resolution and repetition frequency opens.
Please select your preferred settings here.
Repeat for each attached monitor if necessary
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>