PETEMPO PAF-01 Automatic Pet Feeder User Manual

PETEMPO PAF-01 Automatic Pet Feeder

Exploring Your Pet Feeder

Specifications

Assembling Your Pet Feeder

1. Press lock buckle to open lid. Take out all accessories and remove all packing materials.
2. Plug in DC cable. Install 3 x D batteries for back-up power in case of power outage.
3. Align the notches and then snap splitter into the middle of the bowl holder.
4. The support bars can be installed through the holes at the bottom of the base so as to raise the height.
5. Place bowls in bowl holders. Lift feeder and attach the bowls to the notch under­neath the base.
6. Take desiccant bag out from packaging and open desiccant box and place it in. Put the lid back on. The desiccant bag is recommended to be changed once a month.

LED Display

Control Panel

Using Your Pet Feeder

1. Make sure that pet feeder is properly installed before filling the food tank.
2. Unlock first (hold , for 3s) before using the control panel.

Manual Feeding

1. Fill food tank with dry pet food (0.118-0.709 inch). Cap the lid back and press to snap in place.
2. Plug in the equipped power adapter The LED display will light up indicating the feeder is on.
3. With the feeder unlocked, tap ? once to feed 1 portion manually. You can also set automatic feeding plan as follows .

Scheduling Feeding Plan

If no feeding plan is set, the feeder will carry out the default feeding plan as follows

Meal| 1| 2| 3
Time| 8:00| 12:00| 18:00
Portion| 8| 8| 8

Step 1 – Setting Current Time

1. Hold and , for 3s at the same time to unlock the control panel. If no operation is done in 60s, it will be locked again.  
2. Hold for 2s to enter current time setting. Tap or to adjust the hour .  
3. Tap once to save and move to minute setting. Tap or to adjust, then tap  to save and exit. 

Step 2 – Setting Feeding Time & Portion

1. Tap once to enter hour setting (for meal 1 ). Tap or to adjust the feeding time (number fo hour). 
2. Tap once to save and move to minute setting. Tap or to adjust the feeding time (number of minute).
3. Tap once to save and move to portion setting. Tap or to adjust the portion (Max. 48) for meal 1 . 
4. Tap once to save and repeat for the rest meals (2- 6) setting. Or you can hold, for 2s to save the current meal and exit.

Additional Features

Recording a Meal Call

1. With the machine unlocked, hold for 2s until a beep is heard. Keep holding to record your voice (Max. 1 Os). Release to end.
2. The machine automatically plays the recording at each feeding. You can also tap twice to play manually
3. To turn on/off recording function, tap three times within 1 s.

Clearing All Settings

1. With the machine unlocked, hold and  simultaneously for 7s until a beep is heard to restore to factory settings.
2. The recording will not be cleared. To update the meal call, hold to record a new one.

Care and Cleaning

• Always dry all parts thoroughly before reassembling for next use.
• It is recommended to clean the feeder regularly for the health of your pets.

Cleaning Bowls & Holders

1. Lift the feeder and remove the bowl holder. Rinse the bowls off and dry them. Cleaning Lid, Tank & Tank Base
2. In the unlocked status, hold or simultaneously for 3s until a beep is heard to unlock the food slider. Before cleaning the feeder, please remove the battery and turn off the power.
3. Press the lock buckle to open the lid. Take out the desiccant bag.
4. Slide the lock latches on both sides to remove the tank and tank base.
5. Rotate the four lock latches to unlocked position, then take out the food slider.
6. Rinse the lid, tank, tank base and food slider, then dry them thoroughly.
7. Wipe the base with a soft and damp cloth. Do not rinse or immerse the tank base in water.
8. Hold the food slider and place it back to the base. Rotate the lock latches to lock the slider in place.
9. Refer to the forth step and reinstall the feeder in the same way.

Important Safety Instructions

Intended Use

• Children should be supervised to ensure that they do not play with, in or around the appliance.
• Intended for use with dogs or cats only. Do not use this pet feeder with puppies, kittens, dogs or cats not able to reach the food tray or with any physical disability.
• Use the appliance only for intended household purposes as described in this User Manual.

Electricity Safety

• DO NOT operate the appliance if it has a damaged power cord or plug, or if it is malfunctioning or has been damaged in any manner
• DO NOT immerse power cord, plugs, or the device base in water or other liquid or allow moisture to come into contact with these parts.
• In order to reduce the risk of electrical shock, do not place or store an appliance where it can fall or be pulled into a tub or sink.
• Always unplug the appliance when not in use, before putting on or taking off parts and before cleaning. Never unplug by pulling on power cord.
• Use ONLY the provided power adapter and charging cable.

Related To Use

• DO NOT attempt to disassemble, repair, modify or replace any part of your prod­uct. All servicing should be performed by qualified personnel only No user service­able parts inside.
• DO NOT allow pets to chew on or swallow any parts. Cover or hide the power cord with care to prevent pets from biting.
• DO NOT lift the pet feeder by lid, hopper, bowl or bowl holder. Lift and carry feeder using both hands and hopper base, while keeping unit in upright position.
• Install or store pet feeder on a level surface against wall or in a corner to avoid tripping.
• For dry food use only. Do not use wet, canned, moist food or pet food with special shapes, holes or diameter above 1 Smm/0.709 inch.
• Install 3 alkaline D batteries (not included) for back-up power in case of a power outage.
• Before leaving for extended time, always replace batteries with new batteries. Check operation frequently to be sure the pet feeder is dispensing properly.
• Dispose of all packaging materials properly. Keep away from children and pets.

Troubleshooting

• Q: LED display OFF
  

  • A:Check if the pet feeder is properly connected to a powered electrical outlet with the included cable and power adapter
  • If no operation is done in 60s, the screen will be locked (only this icon is on). Hold and . for 3s to unlock and wake up the screen.

• Q: Control but tons are not responsive.
  A: Make sure the control panel is not locked. Unlock the panel first (hold and, for 3s) before using it.

• Q: Food does not come out.
  A:

  • Be sure to add dry food with size of 0.118-0.709 inch (3-18mm) in diameter.
  • Remove the food tank to check if the tank base is properly installed.
  • Check if the food is stuck or food outlet is blocked.
  • Check if the pet feeder is properly connected to a powered electrical outlet or if outage occurs with no back-up batteries installed.

• Q: Cannot hear any voice when feeding.
  A: Make sure you have recorded successfully. Unlock the control panel, double tap to play. If no sound is heard, you may need to record again as instructed in Recording a Meal Call.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>