Williams-Sonoma 45259 Pill 20″x34 Metal Pivot Mirror User Manual
- June 17, 2024
- WILLIAMS SONOMA
Table of Contents
Williams-Sonoma 45259 Pill 20″x34 Metal Pivot Mirror
Product Information
- Product Name: Metal Pivot Mirror – Pill 20×34
- Manufacturer: Williams-Sonoma Inc.
- Date: 25-FEBRUARY-2023
Specifications
- Dimensions: 20×34 inches
- Material: Metal
Product Usage Instructions
Step 1: Unpacking
Remove all the components from the packaging and ensure that all parts are
included.
Step 2: Mounting
- Identify the location where you want to mount the mirror on the wall.
- If your wall is made of drywall, stud, or wood, you can use the provided hardware for mounting. If your wall is not made of wood, please consult your local hardware store for proper fasteners.
- Using the template provided, position it on the wall at the desired location and mark the mounting holes.
- If necessary, drill pilot holes at the marked locations.
- Attach the mirror brackets to the wall using the provided screws and a screwdriver.
- Gently lift the mirror and align it with the brackets. Lower it onto the brackets until it securely locks into place.
Step 3: Adjusting the Mirror
If needed, you can adjust the angle of the mirror by gently pivoting it up
or down using the pivot mechanism.
Step 4: Final Checks
Ensure that the mirror is securely mounted and level. Tighten any loose
screws if necessary.
Frequently Asked Questions (FAQ)
- Q: Can I mount this mirror above a crib, bed, or changing table?
A: No, it is not recommended to mount this mirror above cribs, beds, or changing tables for safety reasons.
Do not dispose of any packaging or contents of the shipping carton until assembly is completed to avoid accidentally discarding small parts or hardware.
Care Instructions
- Dust often using a clean, soft, dry and lint-free cloth.
- Blot spills and wipe with a clean, damp cloth immediately.
- We do not recommend the use of chemical cleansers, abrasives or furniture polish on our lacquered finish.
- Hardware may loosen over time. Periodically check to make sure all connections are tight. Re-tighten if necessary.
Note:
The hardware provided is meant for drywall/stud/wood wall mounting only.
Please consult your local hardware store for proper fasteners if your wall is
not wood.
WARNING!
DO NOT MOUNT THIS ITEM ABOVE CRIBS, BEDS or CHANGING TABLES.
Caution
Parts Included
Shipped Separately
Assemble instructions
TEMPLATE DESIGN NOTES
© 2023 Williams-Sonoma, Inc.