Hally B0BX918S4M Stainless Steel Utility Cart Instruction Manual
- June 17, 2024
- Hally
Table of Contents
Hally B0BX918S4M Stainless Steel Utility Cart
Product Information
Specifications:
- Material: Stainless Steel
- Includes: SS Top, SS Down (Qty 2), Right Leg, Left Leg, Back Leg (Qty 2), Wheel (Qty 4), Screw (Qty 24), Nut (Qty 24)
Product Usage Instructions
Before You Start:
Please ensure you have the following tools:
- Phillips screwdriver
- Adjustable wrench
Note : Tools are not included with the product.
Assembly:
Step 1:
- Assemble parts A, B, C, and E.
- Tighten screws G and H.
Refer to Page #4 for visual instructions.
Step 2:
- Assemble parts A, B, D, and E.
- Tighten screws G and H.
Refer to Page #5 for visual instructions.
Step 3:
- Install the four casters (F) on parts C, D, and E.
Refer to Page #6 for visual instructions.
Step 4:
- Straighten the installed cart.
Your assembly should now be complete. Thank you for your purchase. Keep these instructions for future reference.
FAQ
What should I do if I have questions or problems, need assembly help, or
missing parts?
We are here to help! Please contact our customer service at hally-
sink_table@outlook.com.
We will gladly assist you and ship any replacement parts free of charge.
Where can I find more information or visit the official website?
For more information, please visit our official website at
www.hallymetal.com.
Questions, problems, assembly help, missing parts?
We will gladly help and ship your replacement parts free of charge.
If you have any questions related to the product please free to contact our
customer service mail: hally-sink_table@outlook.com
WARNING
- Do not allow children to climb on the unit
- Serious or fatal crushing injuries can occur from furniture tip-over, To prevent this furniture from tipping over.
- This unit contains small parts that can be swallowed by children and pets. Keep children and pets away during assembly. To avoid the danger of suffocation
BEFORE YOUR START
- Separate and count all parts and hardware.
- If using a power tool, please be aware to slow down and stop when the screw is tight. Failure to do so may result in stripping the screw.
- Requires two people for assembly.
TOOLS REQUIRED
PART LIST
NOTE : Part not shown to actual size.
Assembly
- Assemble A, B, and C, E, and tighten screws G and H.
- Assemble A, B and D, E, and tighten screws G and H.
- Install the four casters F on the C, D, and E.
- Straighten the installed cart.
- Your assembly should now be complete. thank you for you purchase.
- Keep this construction for future reference!
Service mail: hally-sink_table@outlook.com
www.hallymetal.com