MAXUS P026 Shipping Scale User Manual
- June 17, 2024
- MAXUS
Table of Contents
MAXUS P026 Shipping Scale
Product Information
Specifications
- Weighing platform
- On-off button
- Mode button
- Hold button
- Tare button
FAQ
- Q: What should I do if the device was damaged in transit?
- A: Do not install or use it and contact your dealer.
Introduction
To all residents of the United States
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device
after its lifecycle could harm the environment. Do not dispose of the unit (or
batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling.
This device should be returned to your distributor or to a local recycling
service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing!
Please read the manual thoroughly before bringing this device into service. If
the device was damaged in transit, do not install or use it and contact your
dealer.
Safety Instructions
Read and understand this manual and all safety signs before using this appliance.
- This device can be used by children aged from 8 years and above, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the device in a safe way and understand the hazards involved. Children shall not play with the device. Cleaning and user maintenance shall not be made by children without supervision.
- Protect this device from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
- Do not remove the cover under any conditions. There are no user-serviceable parts inside. Never operate this device when its cover is removed.
- Familiarise yourself with the functions of the device before actually using it.
What’s in the box
Description
Refer to the illustrations of this manual.
| 1 | weighing platform |
|---|---|
| 2 | on-off button |
| 3 | mode button |
| 4 | hold button |
| --- | --- |
| 5 | tare button |
General Operation
Functional Instruction
- Put the postal scale on a horizontal surface, and press ON/OFF to turn it on/off.
- Press the MODE button to choose the weighing unit when the number on the screen shows zero clearing.
- Put the stuff on the postal scale and wait till the reading become stable.
Tare Functional
- Setting the weighing mode by following the above instruction.
- Put the tare item on the scale, then press the TARE button and wait till the screen shows zero clearing.
On Hold Reading
Press the HOLD button while weighing to turn on the On Hold Reading mode
- When the machine starts to zero, put the item to be weighed first. After the reading becomes stable, press the “HOLD” button. The display screen will display the character “HOLD”, and the reading will remain unchanged when the weighing object is removed or added.
- The reading will be locked within 300 sec below the HOLD mode.
- If you want to exit the HOLD mode, please press the HOLD button to exit
Calibration Function
- In the shutdown MODE, long-press the “ON/OFF” button and at the same time quickly press the “MODE” button 4-5 times. The display screen will show an internal code. Then release these two keys.
- Press the Mode button again after you finish step 1. The screen will show 20kg first, then show the zero clearing.
- Put the weigh calibration on the scale.
- After the reading becomes stable, press the Mode button. The screen will show PASS, then the calibration has been done.
Notice
- O-Ld: overload. When the screen shows O-Ld, please remove the item to protect the scale.
- When the scale is out of battery, the battery indicator on the screen will flash. Please replace the batteries.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>