BRESSER 7009999 Thermo Hygro 7CH Sensor Instruction Manual

: June 17, 2024
: BRESSER

Table of Contents

BRESSER 7009999 Thermo Hygro 7CH Sensor
Product Information
Product Usage Instructions
General Warning
SCOPE OF DELIVERY
FEATURES OF THE REMOTE UNIT
FIRST OPERATION
WARRANTY & SERVICE
DISPOSAL
CE DECLARATION OF CONFORMITY
TECHNICAL DATA
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BRESSER 7009999 Thermo Hygro 7CH Sensor

BRESSER-7009999-Thermo-Hygro-7CH-Sensor-product

Product Information

Specifications

Model: Thermo-Hygro-7CH-Sensor 868MHz
Article Number: 7009999
Power Supply: 2x AA 1.5V Batteries (not included)
Transmission Channel: 1-7

Features of the Remote Unit

A. LED INDICATOR: Flashes when information is being transmitted to the weather station.
B. WALL MOUNT: For mounting the sensor on walls.
C. SET THE TRANSMISSION CHANNEL (1-7): Input channel for the weather station. Set the channel before inserting the batteries.
D. RESET BUTTON: Press to reset all settings if you have selected a different channel.
E. BATTERY COMPARTMENT: The unit requires 2 pcs. AA/LR6 1.5V batteries.

Product Usage Instructions

General Warning

DANGER!
This device contains electronic components which operate via a power source (power supply and/or batteries). Do not let children use the device while unattended. Only use the device as described in the manual, otherwise you run the risk of an electric shock.

Children should only use the device under adult supervision. Keep packaging material, like plastic bags and rubber bands, out of the reach of children, as they pose a choking hazard.
Keep batteries out of the reach of children. Make sure you insert the batteries correctly. Empty or damaged batteries could cause burns if they come into contact with the skin. If necessary, wear adequate gloves for protection.

DANGER!
Do not expose the device to high temperatures. Use only the recommended batteries. Do not short-circuit the device or batteries, or throw them into a fire. Excessive heat or improper handling could trigger a short-circuit, a fire, or an explosion!

Installation

Place the receiving unit and the sensor unit near each other.
Insert 2 AA 1.5V batteries into the battery compartment of the sensor unit.
Set the transmission channel on the sensor unit by using the SET THE TRANSMISSION CHANNEL (1-7) button.
Mount the sensor unit on a wall using the WALL MOUNT.

Usage

Ensure that the batteries in both the receiving unit and the sensor unit are properly inserted.
Wait for 5 seconds to establish a connection between the units.
The LED INDICATOR will flash when information is being transmitted to the weather station.
Monitor the displayed data on the weather station.
If you need to change the transmission channel, press the RESET BUTTON and follow the instructions to set up a new channel.

FAQ

Q: Where can I download the manual for this product?
A: The manual can be downloaded from the following link: www.bresser.de/P7009999
Q: How should I dispose of the packaging materials and the device?
A: Dispose of the packaging materials properly, according to their type, such as paper or cardboard. Contact your local waste-disposal service or environmental authority for information on the proper disposal. Do not dispose of electronic devices in the household garbage. Used electronic devices must be collected separately and recycled in an environmentally friendly manner.

Thermo-Hygro-7CH-Sensor 868MHz
Art. Nr.: 7009999

MANUAL DOWNLOAD:

www.bresser.de/P7009999

General Warning

DANGER!
This device contains electronic components which operate via a power source (power supply and/or batteries). Do not let children use the device while unattended. Only use the device as described in the manual, otherwise you run the risk of an electric shock.

Children should only use the device under adult supervision. Keep packaging material, like plastic bags and rubber bands, out of the reach of children, as they pose a choking hazard.
Keep batteries out of the reach of children. Make sure you insert the batteries correctly. Empty or damaged batteries could cause burns if they come into contact with the skin. If necessary, wear adequate gloves for protection.

DANGER!
Do not expose the device to high temperatures. Use only the recommended batteries. Do not short-circuit the device or batteries, or throw them into a fire. Excessive heat or improper handling could trigger a short-circuit, a fire or an explosion!

NOTE!

Do not disassemble the device. In the event of a defect, please contact your dealer. The dealer will contact the Service Centre and can send the device in to be repaired, if necessary.
Use only the recommended batteries. Always replace weak or empty batteries with a new, complete set of batteries at full capacity. Do not use batteries from different brands or with different capacities. The batteries should be removed from the unit if it has not been used for a long time.

NOTES ON CLEANING
Separate the device from the power supply or remove the batteries before cleaning.

NOTE!
Only use a dry cloth to clean the exterior of the device. Do not use any cleaning fluid to avoid damaging the electronics.

SCOPE OF DELIVERY

Outdoor sensor
instruction manual
batteries required (not included): 2 pcs. Batteries (1.5V, type AA)

FEATURES OF THE REMOTE UNIT

$BRESSER-7009999-Thermo-Hygro-7CH-Sensor-fig- $2$$

A. LED INDICATOR
Flashes when information is being transmitted to the weather station.
B. WALL MOUNT
For mounting the sensor on walls.
C. SET THE TRANSMISSION CHANNEL (1-7)
Input channel for the weather station. Set the channel before inserting the batteries.
D. RESET BUTTON
Press to reset all settings if you have selected a different channel.
E. BATTERY COMPARTMENT
The unit requires 2 pcs. AA/LR6 1.5V batteries.

FIRST OPERATION

Open the battery compartment cover.
Set the desired channel with the switch. If you are using only one transmitter, please leave the selection at „1“.
Insert 2 new UM-3 or „AA“ 1.5V batteries observing correct polarity.
Close the battery compartment cover and set the unit in the desired location.

Although the outdoor sensor is weatherproof, it should not be placed in places exposed to direct sunlight, rain or snow.

TIPS FOR SETTING UP:
Please follow the instructions below to ensure optimum operation of the equipment:

Assign each external transmitter unit its channel.
Place the receiver unit and transmitter unit within 1 meter of each other and activate the manual search for available signals from all connected outdoor sensors on the main unit (weather station not included with delivery).

WARRANTY & SERVICE

The regular warranty period is 2 years and begins on the day of purchase. To benefit from an extended voluntary warranty period as stated on the gift box, registration on our website is required. You can consult the full warranty terms as well as information on extending the warranty period and details of our services at

www.bresser.de/warranty_terms

DISPOSAL

Dispose of the packaging materials properly, accor-ding to their type, such as paper or cardboard. Contact your local waste-disposal service or environmental authority for information on the proper disposal.
Do not dispose of electronic devices in the household garbage! As per the Directive 2002/96/EC of the Euro-Pean Parliament on waste electrical and electronic equipment and its adaptation into German law, used electronic devices must be collected separately and recycled in an environmentally friendly manner.

CE DECLARATION OF CONFORMITY

Hereby, Bresser GmbH declares that the equipment type with part number: 7009999 complies with Directive: 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address:
www.bresser.de/download/7009999/CE/7009999_CE.pdf.

TECHNICAL DATA

Measurement
- Temperature range: -40-60 °C (-40-140 °F)
- Temperature steps: 0.1 °C/°F
- Humidity range: 20-95% RH
- Humidity steps: 1%
Transmission
- Transmission frequency: 868 MHz
- Maximum transmission power < 25mW
- Transmission range: 100 meters (free field)
Power supply
2x AA 1.5V batteries (not included)