BRESSER F004516 Electric Background System Instruction Manual

BRESSER F004516 Electric Background System

Product Information

• Product Name: BR-EBS-2/3/4/6
• Art. No.: F004516, F004517, F004518, F004519
• Power Input: DC 24V

General Warnings

• Do not use it in the presence of children or animals. Store out of reach of children and animals.
• Make sure that no one can trip over or get caught in the connection cables of the background system. Components could break off and fall to the ground.
• The manufacturer accepts no liability for property damage caused by improper or insufficiently safe installation.
• Only use the recommended power supply for the power adapter.
• The manufacturer accepts no liability for voltage damage caused by the use of an unsuitable power adapter.
• This device contains electronic parts that are powered by a power source (power adapter).
• Only use the device as described in the manual to avoid the danger of an electric shock.
• Never bend, squeeze, or pull power cables, connecting cables, extensions, or connectors.
• Protect cables from sharp edges and heat.
• Check this device, cables, and connections for damage before use. Never attempt to operate a damaged device or a device with damaged electrical parts.
• Damaged parts must be replaced immediately by an authorized service agent.
• Operate the device only in a completely dry environment and do not touch the device with wet body parts.
• Mount the individual components so that they cannot be pulled down or fall to the ground to prevent fire/explosion hazards.
• Do not expose the device to high temperatures. Do not short-circuit the device or dispose of it in fire.
• Excessive heat and improper handling can cause short circuits, fires, and even explosions.

Parts Overview

Refer to Fig. 1 for the parts overview:

• A: M-6
• B: M-5
• C: M-4
• D: M-3
• M: M-1, M-2, M-3, M-4, M-5, M-6, M-51, M-52,
  M- 53, M-54, M-56

Product Usage Instructions

Installation

1. Ensure the area is clear of children and animals before installation.
2. Mount the individual components (M-1 to M-6) securely to a suitable surface using the provided mounting hardware.
3. Connect the power adapter to the DC input of the background system.
4. Plug the power adapter into a suitable power outlet.

Operating Instructions

1. Ensure the device is placed in a completely dry environment.
2. Turn on the power by using the remote control or the power button located on one of the individual components (M-1 to M-6).
3. Adjust the height and position of the background system as desired.
4. Select the desired background color or pattern using the remote control.
5. To change the background, press the appropriate button on the remote control.
6. When finished, turn off the power and unplug the power adapter from the power outlet.

Specifications

• Power Input: DC 24V
• Product Dimensions: Varies depending on the individual components (M-1 to M-6)
• Weight: Varies depending on the individual components (M-1 to M-6)

FAQ

Q: Can I use this product outdoors?

• A: No, this product is designed for indoor use only. It should not be exposed to high temperatures or moisture.

Q: Can I use a different power adapter with this device?

• A: No, it is recommended to use the provided power adapter to ensure proper voltage and avoid damage to the device.

Q: How do I change the background color or pattern?

• A: You can use the remote control to select the desired background color or pattern. Press the appropriate button on the remote control to make the change.

Q: Can I mount this background system on a wall?

• A: Yes, you can securely mount the individual components (M-1 to M-6) to a suitable wall surface using the provided mounting hardware.

OVERVIEW

• Visit our website via the following QR Code or web link to find further information on this product or the available translations of these instructions.
• www.bresser.de/PF004516 .
• www.bresser.de/PF004517 ****
• www.bresser.de/PF004518
• www.bresser.de/PF004519

GENERAL WARNINGS

DANGER OF BODILY INJURY!

• Do not use it in the presence of children or animals. Store out of reach of children and animals.

RISK OF MATERIAL DAMAGE!

• Make sure that no one trips over or gets caught in connection cables of the background system! Components could break off and fall to the ground.
• The manufacturer accepts no liability for property damage caused by improper or insufficiently safe installation!
• Only use the recommended power supply for the power adapter! The manufacturer accepts no liability for voltage damage caused by the use of an unsuitable power adapter!

DANGER OF AN ELECTRIC SHOCK!

• This device contains electronic parts that are powered by a power source (power adapter). Only use the device as described in the manual. Otherwise, you run the DANGER of an ELECTRIC SHOCK.
• Never bend, squeeze, or pull power cables, connecting cables, extensions, or connectors. Protect cables from sharp edges and heat.
• Check this device, cables, and connections for damage before use. Never attempt to operate a damaged device or a device with damaged electrical parts! Damaged parts must be replaced immediately by an authorized service agent.
• Operate the device only in a completely dry environment and do not touch the device with damp body parts.

FIRE/EXPLOSION HAZARD!

• Mount the individual components so that they cannot be pulled down or fall to the ground.
• Do not expose the device to high temperatures. Do not short-circuit the device or dispose of it in a fire! Excessive heat and improper handling can cause short circuits, fires, and even explosions!
• Only use the recommended power supply

IMPORTANT NOTE!

• Do not disassemble the device! In the event of a defect, please contact your dealer. They will contact the Service Center and can arrange the return of this device for repair if necessary.
• Disconnect the power supply by pulling the mains plug when the appliance is not in use, in case of a longer interruption of operation, and before any maintenance and cleaning work.
• Mount your device so that it can be disconnected from the power supply at any time. The power outlet should always be near your appliance and should be easily accessible, as the plug of the power cord serves as a disconnect device from the main supply.
• To disconnect the unit from the mains, always pull the mains plug and never pull the cable!
• Do not subject the device to excessive vibrations.

PARTS OVERVIEW AND SCOPE OF DELIVERY

SCOPE OF DELIVERY (Fig. 1)

• A Motor panel (1x) B Control box ( 1x) C Remote control (1x) D Hook unit1 (2x ) E Power supply unit(1x) F Power cable (1x) G Roll holder2 H Motor2 / Instruction manual
• Additionally required3
• Aluminum rod4 (diam.: 165mm long Paper roll + 10 cm), weighting rod for paper roll (e.g. art. no. F004394)

PARTS OVERVIEW (Fig. 1)

1. Motor connection socket2
2. Function light
3. Power connection socket
4. Connecting cable
5. Wall mount
6. Display
7. [M] button
8. button
9. button
10. Function light
11. [M] button
12. button
13. button
14. Battery compartment
15. C12 connection socket
16. Function light
17. Hollow plug (power cable)
18. C12 plug
19. Power plug
20. Hook
21. Roll holder spreader
22. Knurled screw
23. Wing screw
24. Hollow plug (motor cable)

GENERAL ASSEMBLY INSTRUCTIONS

• Before assembly, remove all accessories from the package and lay them out on a level surface.
• Only use screws and, if necessary, dowels that provide a sufficiently high load-bearing capacity (minimum 25 kg per roll incl. all attachments).
• Only connect the individual electronic components with the connection/power cables supplied.
• ATTENTION: Do not install defective cables and/or electronic parts and do not put them into operation!

MOUNTING

(Fig. 2-5)

Step 1:

1. Push one roll holder2 (G) with and one without motor (H) left and right into the paper tubes or aluminum tubes3,4 of the background rolls.
2. Fix the roll holders in the tube/aluminum pipe with the knurled screws (22).

Tip: For background rolls that are wound on a cardboard core, you might consider replacing the cardboard core with an aluminum tube3,4 to prevent sagging or buckling. This is not essential.
NOTE: Do not overtighten the wing screw (23) of the screw clamp! Otherwise, the system will be blocked!

Step 2:

1. Measure the length of the background roll incl. mounted roll holder and motor connection.
2. Mount the hook units 1 (D) to the left and right of the wall or ceiling using suitable screws and, if necessary, dowels.

IMPORTANT: Precise vertical and horizontal alignment must be ensured!

Step 3:

• Hook the background rolls, which are preassembled with roll holders and motor, into the hooks (20) on the left and right at the desired levels.
• IMPORTANT: It is strongly recommended to lift the background rolls only with two persons and to hook them into the hooks due to the high weight!

Step 4:

1. Mount the motor panel (A) near the motors using suitable screws and, if necessary, dowels.
2. Insert the hollow plug (24) of the motor (H) into one of the free motor connection sockets (1) of the motor panel (A) stecken.

POWER SUPPLY

(Fig. 6)

MOTORS & PANEL

1. Insert the hollow plug (17) of the power cable into the DC power connection socket (3) on the motor panel (A).
2. Insert the C12 plug (18) into the C12 connection socket (15) on the power adapter.
3. Insert the Euro plug (19) into the mains power socket. The function light (16) lights up when the power supply has been correctly established.

REMOTE CONTROL

1. Open the battery compartment (14).
2. Insert the batteries according to the indicated pole orientation (+/-).
3. Close the battery compartment (14) again.

ENGINE CONTROL

PER CONTROL BOX

1. Press the [M] button (7) to set the desired motor (M1-M6). The display (6) shows the number of the selected motor (1-6).
2. Press the (8) or (9) button to wind or unwind the background roll attached to the selected motor.

BY REMOTE CONTROL SET UP REMOTE CONTROL

IMPORTANT: Set up the remote control before using it for the first time. To do so, proceed as follows:

1. Establish the power supply for the remote control and the motor panel with the connected motors one after the other.
   • NOTE: If the setup process is unsuccessful, please change the power-on order (turn on the motor panel first, then turn on the remote control).
2. Press and hold the [M] button on the remote control for 3-5 seconds until a red dot flashes on the display (6) of the control box.
3. Press and hold the [M] button again for 3-5 seconds until the green function light (10) on the remote control flashes. The setup is complete.

USE REMOTE CONTROL

Once set up is finished, the remote control can be used as follows:

1. Press the [M] button (11) to set the desired motor (M1-M6). The display (6) of the control box shows the number of the selected motor (1-6).
2. Press the (12) or (13) button to wind or unwind the background roll attached to the selected motor.

TECHNICAL DATA

MOTOR PANEL/CONTROL BOX

• Number of connectable motors: up to 6 motors2
• Voltage input: AC110-240V, 50~60Hz
• Voltage output: DC24V/2.7A
• Controller: Manually via control box or remote control
• Power: 50W per motor
• Load capacity per level: maximum 20 kg

REMOTE CONTROL

• Number of controllable motors: up to 6 motors
• Power supply: 2 pcs. of 1.5V batteries, type AAA/LR03
• Transmission frequency 2.4GHz ISM band

WARRANTY

www.bresser.de/warranty_terms

Service

• Please contact the service center first for any questions regarding the product or claims, preferably by e-mail.
• e-mail: service@bresseruk.com
• Telephone*: +44 1342 837 098
• BRESSER UK Ltd
• Customer Support
• Suite G3, Eden House
• Enterprise Way
• Edenbridge, Kent TN8 6HF
• United Kingdom
• Number charged at local rates in the UK (the amount you will be charged per phone call will depend on the tariff of your phone provider); calls from abroad will involve higher costs.
• Bresser GmbH
• Gutenbergstraße 2
• 46414 Rhede · Germany
• www.bresser.de
• BresserEurope
• Bresser UK Ltd.
• Suite 3G, Eden House Enterprise Way Edenbridge, Kent TN8 6HF Great Britain

References

• Bresser | Startseite | Expand Your Horizon mit BRESSER
• Bresser | Startseite | Expand Your Horizon mit BRESSER

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>