faber 1200-450 I Sensacion E-Slim Linear Instructions
- June 17, 2024
- FABER
Table of Contents
faber 1200-450 I Sensacion E-Slim Linear
Product Information
Specifications:
- Model: 1200/450 I, 1700/450 I, 2200/450 I
- Smart Phone App: Flame Connect
- Power: PNom 1.2 kW, Pmin 0 kW, Pmax 1.2 kW
- SB: 0.8 W
Product Usage Instructions
Package Contents:
- Chimenea: 1 piece
- Cristal frontal: 1 piece
- Transductor de repuesto: 2 pieces
- Ventosa: 2 pieces
- Control remoto: 1 piece
- Deflectores: 4 pieces for 1200/450 I, 6 pieces for 1700/450 I, 8 pieces for 2200/450 I
- Nivel de burbuja: 1 piece
- Tornillos: 4 pieces
Enmarcar (Framing):
Prepare a framed wall opening according to the dimensions provided in the
table below. Openings below the unit are necessary to allow airflow to the
bottom of the unit.
Modelo| Dimensiones de la estructura| Ancho de apertura de paneles de yeso|
Altura de apertura de paneles de yeso
---|---|---|---
1200/450 I| 48″ x 68″| 31 3/4″| 12″
1700/450 I| 46 3/16″ x 66 3/16″| 17 1/2″| —
2200/450 I| 88″ x 86 3/16″| —| —
**Flame Deflectors
**
The unit comes with pre-installed slotted deflectors to create a uniform flame. If desired, you can customize the flame appearance using the individual deflectors provided.
- To remove the pre-installed deflectors, carefully insert a screwdriver into a deflector slot and remove each one.
- Bend the supplied individual deflectors until each deflector separates.
- To insert the deflectors, carefully use a screwdriver to open the flame outlet slot.
**General Operation
**
The product can be operated using manual controls or the remote control.
Manual Controls:
- Espera: Press to turn on/off the unit.
- Calor: Press to activate/deactivate the heat function.
- Aumentar la temperatura: Press to increase the temperature setting.
- Disminuir la temperatura: Press to decrease the temperature setting.
- Presione para disminuir el ajuste de temperatura: Hold for 3 seconds to switch between Fahrenheit and Celsius.
- Intensidad de la llama: Press repeatedly to adjust the flame intensity (LOW, MED, HIGH).
- Impulso del ventilador: Press repeatedly to adjust the fan speed (OFF, LOW, MED, HIGH).
- Brillo: Press repeatedly to adjust the brightness of the upper light.
Remote Control Functions:
Temporizador: Press repeatedly to cycle through different heat modes.
FAQ
How do I adjust the flame intensity?
To adjust the flame intensity, press the “Intensidad de la llama” button on
the manual controls or remote control. The display will show LOW, MED, or
HIGH. Please note that you should wait for 15 minutes of operation before
adjusting the flame intensity.
How do I set the timer?
To set the timer, press the “Temporizador” button on the remote control.
The fireplace will enter standby mode after the set time has elapsed. The
timer can be set from 30 minutes to 8 hours in 30-minute intervals. To turn
off the timer, press the “Temporizador” button repeatedly until the remaining
time is displayed.