ASUS ExpertWiFi EBR63 Wireless AX3000 Dual-Band Router User Guide
- June 12, 2024
- Asus
Table of Contents
Expert WIFI EBR63 Wireless AX3000 Dual-Band Router
User Guide
Quick Setup Guide
Wireless-AX3000 Dual-band Router
Expert WIFI EBR63
Router Overview
1. SGHz LED
2. 2.4GHz LED
3. LAN 1-4 LEDs
4. WAN (Internet) LED
5. Power LED
6. WPS button
7. Reset button| 8. Power button
9. Power (DCIN) port
10. USB 2.0 port
11. USB 3.2 Gen 1×1 port
12. WAN (Internet) port
13. LAN 1-4 ports
---|---
• For detailed information, please refer to https://asus.click/ExpertWiFiEBR63
E21801 / First Edition /July 2023
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest
standards for protecting our environment. We believe in providing solutions
for you to be able to responsibly recycle our products, batteries, other
components, as well as the packaging materials. Please go to
http://csr.asus.com/english/Takeback.htm for the detailed recycling
information in different regions.
REACH
Complying with the REACH (Registration, Evaluation, Authorization, and
Restriction of Chemicals) regulatory framework, we published the chemical
substances in our products at ASUS REACH website at
http://csr.asus.com/english/REACH.htm
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF Caution Statement:
WARNING : Any changes or modifications not expressly approved by the
party responsible for compliance could void your authority to operate the
equipment.
WARNING! Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Prohibition of Co-location This device and its antenna(s) must not be co-
located or operating in conjunction with any other antenna or transmitter.
IMPORTANT NOTE:
Radiation Exposure Statement: This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment. End users must
follow the specific operating instructions for satisfying RF exposure
compliance. To maintain compliance with FCC exposure compliance requirement,
please follow operation instruction as documented in this manual. This device
is restricted for indoor use.
WARNING! This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20cm from all persons
and must not be co-located or operating in conjunction with any other antenna
or transmitter.
Compliance Statement of Innovation, Science and Economic Development Canada
(ISED)
This device complies with Innovation, Science and Economic Development Canada
license exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired
operation of the device. Operation in the band S150-5250 MHz is only for
indoor use to reduce the potential for harmful interference to co-channel
mobile satellite systems. CAN ICES-003(B)/NMB-003(B)
-
Reboot modem and ensure its connection is ready
Notice: Unplug modem for 10 sec then plug back in -
Prepare your ASUS router and power it on Once the WAN LED turns ON, it is ready for set up.
-
Scan the code and download ASUS Expert WIFI app for setup
For more information, please scan the code on the coverhttps://asus.click/asusexpertwifii | https://asus.click/asusexpertwifia
---|---
[Web] Open a web browser and navigate to http://expertwifi.net for web setup.
Wall-mount the Expert WIFI EBR63
IMPORTANT! DO NOT install this equipment on the ceiling or mount it
higher than 2 meters.
NOTE: It is recommended to use screws with a size of PA3.0*25mm.
References
- Global Take Back Service | Resource Regeneration | Circular Economy | ASUS ESG website, ASUS ESG goal
- ASUS Global
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>