T G TG-384MINI Wireless Speaker User Manual

T G TG-384MINI Wireless Speaker

Product Information

Specifications

• Compliance: FCC radiation exposure limits
• Environment: Uncontrolled
• Co-location: Not allowed with other antenna or transmitter

Product Usage Instructions

Safety Precautions

Before using the product, please read and understand the following safety precautions:

1. Do not operate the product in a co-located manner with any other antenna or transmitter.
2. Keep the product away from children and pets.
3. Do not expose the product to extreme temperatures or direct sunlight.
4. Avoid using the product near water or in damp environments.
5. Do not disassemble or modify the product. Contact customer support for any repairs or servicing needs.

Installation

To install the product, follow these steps:

1. Choose a suitable location for the product that complies with the FCC radiation exposure limits.
2. Ensure there are no other antennas or transmitters nearby.
3. Place the product on a stable surface and connect it to a power source.
4. Refer to the user manual for any additional installation requirements specific to your setup.

Operation

To use the product, follow these steps:

1. Ensure the product is properly installed and connected to a power source.
2. Refer to the user manual for any specific operational instructions related to your desired use.
3. If you experience any issues or have questions, consult the troubleshooting section of the user manual or contact customer support.

Maintenance

To maintain the product’s performance and prolong its lifespan, follow these guidelines:

1. Regularly clean the product using a soft, dry cloth.
2. Avoid using harsh chemicals or abrasive materials during cleaning.
3. Keep the product away from dust and debris.
4. Store the product in a cool, dry place when not in use.

FAQ

• Q: Can I use this product near other antennas or transmitters?
• A: No, this product must not be co-located or operating in conjunction with any other antenna or transmitter.

PRODUCT SPECIFICATIONS

• Wireless: V5.3
• Support: L2CAP/A2DP/AVCTP, can receive an AUDIO signal and control the AUDIO device.
  • Support HSP/HFP(Handsfree profile), with HANDS-FREE functions.
• Working distance: 10M
• SNR: ≥90db
• Battery: 3.7V about 1200mAh
• Normal volume playing time: about 3 hours with LED light off
• Speaker driver: ¢45mm*2
• Speaker Power: 4 /5W*2
• Frequency response: 120Hz-20KHz
• Unit size: 7676220.9mm
• Unit weight: about520g (not including accessories)
• Charging: 5V/500mAh
• Charging time: about 3H

PRODUCT FEATURE

1. International advanced wireless chip and circuit design techniques, support wireless devices.
2. With the FM function, one can search radio station broadcast automatically
3. With a Hi-Fi speaker, to make sure a clear and bright sound.
4. Support Micro SD card and USB card, play MP3 format audio.
5. The wireless working distance is 10 meters.
6. With AUX line in, can directly connect the outside devices, for example, tablet PC/TV/cell phones.
7. It will close automatically after 30 minutes if disconnected Wireless not working
8. A variety of flashing LED lights with different colours, and colour lights flash follow the melody.
9. Support TWS.

KEY AND SLOT FUNCTION

1. DC 5V slot: Use the standard USB TYPE-C charging cable for power charging.
2. TF slot: It can decode and play MP3 format audio when put TF card into the slot.
3. USB slot: It can decode and play MP3 format audio when the USB card into the slot.
4. AUX line in the slot: Use the Mini 3.5 head input through outside devices.
5. Power switch: Press long for power on / power off.
   • When playing music, (USB card/TF card/Wireless/line in), short press for “play/pause”.
   • In FM mode, press short to search station automatically, and press again to stop searching.
   • Under wireless mode with mobile paired, when a call comes, press short to answer a call hands-free, press again to hand up, and press twice to ring up a call.
6. When playing music, Press short for the last song, and long press to turn down the volume.
7. When playing music, press short for the next song, and long press to turn up the volume.
8. LED switch: press short for option of the LED flashing light, and press long to close/open the LED light.
9. When playing music, short press to switch the model (USB card/TF card/Wireless/line in/FM).

TWS: Keep the two speakers under Wireless mode without pairing, press the “M” key for 2-3 seconds on either of the speakers until hear a hint and meantime the button light stops flashing, now it is TWS mode, then can paire the mobile.

NOTE

• In the FM mode, put in a micro charging cable or AUX cable to increase the FM radio signal. Turn off the LED light to improve the radio signal because LED light has interferences for FM mode.
• If this speaker crashes during use, you can press and hold the power button for 8 seconds to reset and shut down.
• USB/TF card pls use FAT32 format.

FCC STATEMENT

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .
This transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>