MusyVocay NT-001 Karaoke Speaker Instruction Manual

June 17, 2024
MusyVocay

NT – 001
Karaoke Speaker

INSTRUCTION MANUAL

OPERATING INSTRUCTIONS

Please carefully read all instructions before operating the karaoke machine and follow them during use.

  • Keep the speaker away from heat sources, such as radiators, and ensure it is not exposed to humid air or water.
  • Place the equipment in a stable position to prevent accidental dropping.
  • Connect the speaker only to the specified type of power supply mentioned in the operating instructions.
  • If you are not a professional, do not attempt to repair the speaker.
  • Before cleaning the unit, please unplug the power cord from the outlet and switch off the power. Use a soft cloth for cleaning and avoid using harsh abrasives or chemicals, as they can damage the surface.
  • When not in use for an extended period, unplug the speaker’s power cord from the outlet and turn off the power switch.

PACKING LIST

  1. Karaoke Machine ………………………….. 1pc
  2. Microphone …………………………………..   2pcs
  3. Instruction Manual …………………………. 1pc
  4. Stereo Audio Cable …………………………..  1pc
  5. Type-C Charging Cable ……………………… 1pc

SPEAKER DESCRIPTION

Schematic Diagram

Power Switch & Charging

  1. “OFF” position: Speaker is powered off.
  2. “ON” position: Speaker is powered on and will enter the same playback mode as last time.
  3. Charging: Connect the power adapter to the Type-C socket to begin charging the built-in battery.

Playback Modes

  1. Audio Input Function
    Connect the audio device to the “LINE” interface to play music from mobile phones, MP3 players, computers, and more.

  2. MP3 Function
    TF Card/U Disk: Insert a TF card into the “TF” slot to play music from the card.
    Alternatively, insert a U disk into the speaker to play music from the disk.

Button Functions

  1. /M:
    Play/Pause: Long press the button to enter the playback mode or to pause.
    Mode Selection: Short press to switch between different modes, including Bluetooth, TF card, U disk, and LINE.

  2. /V-:
    Previous Song/Volume Down: Short press to play the previous song, long press to decrease the volume.

  3. /V+:
    Next Song/Volume Up: Short press to play the next song, long press to increase the volume.

  4. Music/Orig:
    Music/Original Sound: Short press to cancel the original singer’s voice.

  5. Inner Ring LED: Short press to change the inner light modes (Gradient, Soft Blue, Red, Green, Deep Blue)

  6. LED 2:
    Outer Ring LED: Short press to change the outer light modes (Carousel, Monochrome Gradient, Multicolor Gradient, Music Sync)

Instructions for Use

  1. Upon powering on, the speaker’s default mode is Bluetooth. To connect your phone or other device via Bluetooth, search for the speaker’s Bluetooth name “NT-001” and connect to it.

  2. The speaker automatically switches to different modes based on the type of insertion:
    • Insert a TF card to activate TF mode.
    • Insert a USB flash drive to activate USB mode.
    • Connect a 3.5mm audio cable to activate LINE mode.

  3. If both a TF card and USB flash drive are inserted, you can press the mode button to cycle through the available modes.

Singing Instructions
When the speaker is turned on, the wireless microphone will automatically connect. Simply switch on the power of the wireless microphone, and you can start singing in any mode of the speaker. While singing, you can adjust the speaker’s volume to your preference for the desired singing effect.
The wireless microphone has a power indicator on its display screen. If the battery icon shows a low battery level, recharge the microphone before using it again.

MICROPHONE INSTRUCTIONS

Schematic Diagram
Button Functions

  1. Volume -:
    Press to decrease the volume.

  2. Volume +:
    Press to increase the volume.

  3. Reverb -:
    Press to decrease the reverb effect.

  4. Reverb +:
    Press to increase the reverb effect.

  5. E Q :
    There are 6 audio modes for EQ, ranging from 0 to 5. 0 is the default mode, and 1-5 are different audio modes that can be adjusted based on personal preferences.

6. A B:
A B is the frequency adjustment button for the microphone, with 8 frequency ranges f rom 1 to 8. It can be used to switch frequencies and avoid interference when the microphone is affected by external frequencies.
A B is also the microphone switch button, allowing switching between A microphone and B microphone.

Instructions for Using A B Key

  1. Short press to change the frequency.
    Press once to switch to the next frequency incrementally (the host receiver will automatically search and connect during frequency changes, and there will be a 2-second pause).

  2. Long press for microphone switching
    Long press for about 5 seconds, it switches between A microphone and B microphone (e.g., if the microphone is currently set as A microphone and you want to switch to B microphone, long press the A B key for about 5 seconds). The purpose of A B switch is to avoid conflicts when both microphones are in the same A or B state. In such cases, one microphone needs to be switched to the other state. (During the microphone switch process, there will be a pause as the host re-pairs the microphone.)

Microphone Charging Instructions

There are two ways to charge the microphone:

  1. Using a 5V 1-2A adapter
    Connect the adapter to the MICRO 5P jack cable and plug it into the charging port located at the bottom of the microphone.

  2. Placing the microphone on the karaoke machine
    When the speaker is connected to a DC power source, you can directly place the microphone in the microphone placement slot on the speaker for charging. During the charging process, the battery icon on the microphone display will flash to indicate the
    charging status. When the battery is fully charged, the battery icon will show a full charge status.

Note

  1. Use a 5V/2A power adapter to charge the microphone. Do not play music while charging.
  2. When the microphone is turned on, avoid pointing it directly at the speaker to prevent feedback or whistling sound.

Product Parameters

Power Output: 15W+15W
Frequency Range: 100Hz-18kHz
Drive Unit: 4IN2
Signal-to-Noise Ratio: ≥80dB
Lithium Battery: 7.4V/3000mAh
Shell Material: Plastic
Package Size: 340mm
175mm*215mm

MADE IN CHINA

Documents / Resources

| MusyVocay NT-001 Karaoke Speaker [pdf] Instruction Manual
NT-001 Karaoke Speaker, NT-001, Karaoke Speaker, Speaker
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals