Trust 73182 Starter Set Wireless Switching User Manual

: June 12, 2024
: Trust

Table of Contents

Trust 73182 Starter Set Wireless Switching
Product Information
Product Usage Instructions
How To Use
Unpair the socket switch from a transmitter
Clear the memory of the socket switch
Replace transmitter battery
Safety Instructions
Declaration of Conformity
TECHNICAL SPECIFICATIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Trust 73182 Starter Set Wireless Switching

Product Information

Product Name	START-LINE SET APC SWITCH-IN
Model	Item 73182/73211 Version 1.0
Languages	MULTI-LANGUAGE
Usage Limit	Maximum load: 2300W

Product Usage Instructions

Place the socket switch

A. Plug the socket switch into a power socket.
B. The socket switch will activate the pairing mode for 6 seconds.

Pair the socket switch with a transmitter

A. After plugging in the socket switch, send an ON-signal with a channel on a Trust Smart Home transmitter while the pairing mode is active.
B. The socket switch will make a clicking sound 4 times to confirm the pairing has succeeded. The socket switch can store up to 32 different transmitters in its memory. The paired transmitters will be remembered when the socket switch is moved to another power socket.

Operating the socket switch

A. Connect the device you want to control with the socket switch and press the ON button with the assigned channel on the paired transmitter to turn the socket switch/device on. Do not exceed the maximum load: 2300W.
B. Press the OFF button with the assigned channel on the paired transmitter to turn the socket switch/device off.

Optional: Unpair the socket switch from a transmitter

A. Disconnect any connected device and remove the socket switch from the power socket.
B. Plug the socket switch back in the power socket. The pairing mode will be activated for 6 seconds.
C. While the pairing mode is active, send an OFF signal with the assigned channel on the paired transmitter to unpair it.
D. The socket switch will make a clicking sound 4 times.

Optional: Clear the memory of the socket switch

A. Disconnect any connected device and remove the socket switch from the power socket.
B. Plug the socket switch back in the power socket. The pairing mode will be activated for 6 seconds.
C. While the pairing mode is active, send a GROUP-OFF signal with a transmitter to clear the memory.
D. The socket switch will make a clicking sound 4 times to confirm the memory is cleared.

Replace transmitter battery

A. Open the battery compartment.
B. Place a new 3V CR2032 lithium battery. The polarity should match the symbols on the holder.
C. Close the battery compartment.

How To Use

Place the socket switch
- A. Plug the socket switch into a power socket.
- B. The socket switch will activate the pairing mode for 6 seconds.
Pair the socket switch with a transmitter
- A. After plugging in the socket switch, send an ON-signal with a channel on a Trust Smart Home transmitter while the pairing mode is active.
- B. The socket switch will make a clicking sound 4 times to confirm the pairing has succeeded. The socket switch can store up to 32 different transmitters in its memory. The paired transmitters will be remembered when the socket switch is moved to another power socket.
Operating the socket switch
- A. Connect the device you want to control with the socket switch and press the ON button with the assigned channel on the paired transmitter to turn the socket switch/device on. Do not exceed the maximum load: 2300W.
- B. Press the OFF button with the assigned channel on the paired transmitter to turn the socket switch/device off. $Trust-73182-Starter-Set-Wireless-Switching-fig- $1$$

Unpair the socket switch from a transmitter

A. Disconnect any connected device and remove the socket switch from the power socket.
B. Plug the socket switch back in the power socket. The pairing mode will be activated for 6 seconds.
C. While the pairing mode is active, send an OFF signal with the assigned channel on the paired transmitter to unpair it.
D. The socket switch will make a clicking sound 4 times. $Trust-73182-Starter-Set-Wireless-Switching-fig- $2$$

Clear the memory of the socket switch

A. Disconnect any connected device and remove the socket switch from the power socket.
B. Plug the socket switch back in the power socket. The pairing mode will be activated for 6 seconds.
C. While the pairing mode is active, send a GROUP-OFF signal with a transmitter to clear the memory.
D. The socket switch will make a clicking sound 4 times to confirm the memory is cleared. $Trust-73182-Starter-Set-Wireless-Switching-fig- $3$$

Replace transmitter battery

A. Open the battery compartment.
B. Place a new 3V CR2032 lithium battery. The polarity should match the symbols on the holder.
C. Close the battery compartment.

Safety Instructions

Product support: www.trust.com/71182. Warranty conditions: www.trust.com/warranty
To ensure the safe handling of the device, follow the safety advice on: www.trust.com/safety

The Wireless range is strongly dependent on local conditions such as the presence of HR glass and reinforced concrete Never use Trust Smart Home products for life-support systems. This product is not water-resistant. Do not attempt to repair this product. Wire colors may vary per country. Contact an electrician when in doubt about wiring. Never connect lights or equipment that exceed the maximum load of the receiver. Exercise caution when installing a receiver voltage may be present, even when a receiver is switched off. Maximum radio transmit power: -9.83 dBm. Radio transmission frequency range: 433,92 MHz

Disposal of packaging materials – Dispose of packaging materials that are no longer needed in accordance with applicable local regulations. The packaging materials have been selected for their environmental friendliness and ease of disposal and are therefore recyclable.
Disposal of the device – The adjacent symbol of a crossed-out wheelie bin means that this device is subject to Directive 2012/19/EU. his directive states that this device may not be disposed of in normal household waste at the end of its usable life, but must be handed over to specially set-up collection locations, recycling depots or disposal companies. This disposal is free of charge for the user.
Disposal of batteries – Used batteries may not be disposed of in household waste. Only dispose of batteries when they are fully discharged. Dispose of batteries according to local regulations. Cover the poles of partially discharged batteries with tape to prevent short circuits.
Trust Electronics Ltd. declares that item number 73182/73182-02/73211/73211-02 is in compliance with Directive Electromagnetic Compatibility Regulations 2016, and Radio Equipment Regulations 2017. The full text of the declaration of conformity is available at the following internet address: www.trust.com/compliance
Trust International B.V. declares that item number 73182/73182-02/73211/73211-02 is in compliance with Directive 2014/53/EU – 2011/65/EU. The full text of the EU Declaration of Conformity is available at the following web address: www.trust.com/compliance.

Declaration of Conformity

Trust International B.V. declares that this Trust Smart Home-product:

Model: APC Starter Set Wireless Switching
Item number: 73182/73182-02/73211/73211-02
Intended use: Indoor

is in compliance with the essential requirements and other relevant provisions of the following directives:

ROHS 2 Directive (2011/65/EU)
RED Directive (2014/53/EU)
The full text of the EU Declaration of Conformity is available at the following web address: www.trust.com/compliance.

TRUST SMART HOME