Shenzhen Longzhiyuan Technology Co Ltd S-12G3 Battery Bullet Camera User Manual

Shenzhen Longzhiyuan Technology Co Ltd S-12G3 Battery Bullet Camera User Manual

Package Accessories

• Camera’1

• Screws bag 1

• Bracket 1

• Label 1

• USB cable 1

• User Manual™t

• AP Quick St Guide’

Product Features

• Support 10,000mA Rechargeable battery to keep it work 5-6 months.
• External antenna , enhanced WiFi Signal with longer transmission distance
• IR LED and spotlight optional, see color at night
• support solar panel integrated
• 610 meters distance of PIR motion detection

Product Specification

Product Design

1. Antenna
2. Lens
3. IR LED & White LED
4. Light sensor
5. Mic
6. status Lights
7. PIR

Status Lights
Red Light: Red Light is steady on, indicating W connection failure
Blue Light: Blue Light is steady on,indicating WiFi connection successful

1. Power Button
2. Reset Button
3. Micro-SD
4. Micro USB
5. Mounting bracket

Install your camera
Before install camera, please ensure that the camera has been added o the APP

Step 1: Drill 4 holes on the wall according to the sticker of installation, then knock 4 plastic plug inside each hole.

Step 2: Seperate the bracket follow below diagramfix the base plate on the wall with screws.

Step 3: Place the universal ballinto the groove in the middle of the base plate, put the bracket cover through the universal ball and tighten it up clockwise, then twist the rotary knob to the Screw column of the universal ball,

Step 4 : Insert the Micro-SD card to the camera , twist the camera 10 the screw column of the bracket, adjust the camera to a suitable angle, then fix the cover of bracket

Solar panel installation(Optional accessories)

Alntegrate with camera(make sure the install position s easy to get sunshine)
Step 1 Fix the base plate of bracket on the back of solar panel with 2 screws.

Step 2 . Fix the universal ball cover and rotary knob to the bracket.

Step 3 Rotate the screw column of niversal ball to the nut on the top of the camera.

Step 4. Adjust the angle of solar panel face to the sunshine ,generally. 45°face o south is advisable.Connect the usb plug of solar panel o the s connector at the bottom of the camera.

B.Seperate with camera
Step1 Install the bracket of solar panel at a position easy to get sunshine.

Step 2 Rotate the screw column of universal ball to the nut on the back of the solar panel.

Step 3 Adjust the angle of solar panel face to the sunshine generally 45°face to south is advisable.

Step 4. Connect the usb plug of solar panel to the usb connector at the bottom of the camera.

Notes

How to reduce the misinformation

1. Do not install the camera under any strong light environment, including direct sunshine, bright lights, etc.
2. Keep away from air vents, such as heating i vents, humidifiers, air conditioners and opened window, etc.
3. Do not install the camera face the mirror.
4. Do reduce interference from wireless signals, keep the camera at least 1 meter away from the wireless device
5. D0 Not install the camera at a strong wind position.
6. Do not install the camera at crowd or heavy traffic.

FCC warning statements:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

• However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, includinginterference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 20cm \between the radiator & your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>