Godox LF100Y01 LiteFlow 100 Cine Lighting Reflector User Manual

: June 17, 2024
: Godox

Table of Contents

Foreword
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**Godox LF100Y01 LiteFlow 100 Cine Lighting Reflector User Manual

**

Foreword

Thank you for purchasing!
Introducing the innovative and unique lighting diffusion system by Godot – the Cine Lighting Reflector. With its precision-designed reflector, this cutting- edge system accurately guides the light source to the desired lighting positions, allowing for precise control over the scattering of light while minimizing reliance on flags or frames on the set. What’s truly astonishing is the
meticulously crafted aluminum coating surface, which boasts only 3% light loss and 100% color accuracy

DIFF 1(Blue color): Hard ray of light (diffusion rate is 13.2%)
DIFF 2(Yellow color): Medium soft ray of light (diffusion rate is 52%)
DIFF 3(Green color): Soft ray of light(diffusion rate is 95%)
DIFF 4(Red color) : Soft strip ray of light(diffusion rate is 94%) The above data is provided by Godot laboratory.

Lighting Effects Display (Using Lite Flow 50 as an example)

DIFF 1（Blue color）

DIFF 2（Yellow color）

DIFF 3（Green color）

DIFF 4（Red color）

Cautions:

The reflector is prone to scratching. Please use specialized gloves when handling.
To ensure the reflector remains free from stains, it is recommended to clean it immediately after use. Failure to do so may result in difficulty cleaning the reflector if oil stains are left unattended for an extended period.
After using the Lite Flow 100 reflector, it is necessary to clean it promptly and cover it with the protection plate.
The reflector is prone to scratching, so handle with care during transportation or installation.
The Yoke is equipped with a 28mm female socket and can be installed on a 28mm male stand.
When using a rope, it can be connected through the rope holes located at the four corners.

Name of Parts(Lite Flow 100)

Double-sided Reflector
Rope Passage

Cine Reflector Cleaning Instructions (Cleanser sold separately)

Please wear gloves to clean during use
Spray an appropriate amount of cleaning solution evenly onto the surface of the reflector.
Let the cleaning solution sit for 15-30 seconds to thoroughly break down any oil stains
Use a cleaning cloth to dry the reflective surface
Note. To ensure cleaning effectiveness, please do not reuse the cleaning cloth

What’s Inside Lite Flow 100

Cine Lighting Reflector（100cm ×100cm) Lite Flow 100 D13 × 1

Cine Lighting Reflector（100cm ×100cm) Lite Flow 100 D24 × 1

Yoke × 2

Protection Plate × 4

Installing the Yoke

Align the yoke with the installation slots on both sides of the reflector. Once aligned, clockwise
tighten the two screw caps on the quick-release lock sleeve. Tighten them alternately from left to
right until the installation is complete

Optional Accessories

Yoke LF100Y01

Cleaning Kit CK01

Flight Case FC04

Specification

Model	Size	Net weight≈
Lite Flow 100 D13	39.37″*39.37″	18.12kg
Lite Flow 100 D24	39.37″*39.37″	18.12kg

GODOX Photo Equipment Co.,Ltd.
Add.: Building 2, Yinchuan Industrial Zone，Tangwei Community, Fehaid Street, Bauman District, Shenzhen 518103, China Tel: +86-755-29609320(8062) Fax: +86-755-25723423
E-mail: godox@godox.com