AG neovo LE-27 LED Backlit Display User Manual

AG neovo LE-27 LED Backlit Display

Specifications

• Display Type: LED-backlit LCD monitor
• Model Numbers: LE-22, LE-24, LE-27
• Screen Size: 22 inches, 24 inches, 27 inches
• Resolution: Varies depending on the model
• Aspect Ratio: 16:9
• Contrast Ratio: Varies depending on the model
• Brightness: Varies depending on the model
• Response Time: Varies depending on the model
• Connectivity: VGA, HDMI, DVI
• Dimensions: Varies depending on the model

Product Usage Instructions

Front Panel Control

The front panel of the LED-backlit display includes various control buttons for adjusting settings and navigating through the menu options. The buttons are labeled and their functions are as follows:

• Power Button: Turns the display on or off.
• Menu Button: Opens the on-screen display (OSD) menu.
• Navigation Buttons: Allow you to navigate through the OSD menu and select options.
• Adjustment Buttons: These buttons are used to adjust specific settings such as brightness, contrast, and volume.

How to Adjust a Setting

To adjust a setting on the LED-backlit display, follow these steps:

1. Press the Menu button to open the OSD menu.
2. Use the Navigation buttons to move through the menu options.
3. Press the Adjustment buttons to make changes to the selected option.
4. Once you have made the desired adjustment, press the Menu button again to exit the OSD menu.

Adjusting the Picture

To adjust the picture settings on the LED-backlit display, follow these steps:

1. Press the Menu button to open the OSD menu.
2. Navigate to the Picture settings option using the Navigation buttons.
3. Press the Adjustment buttons to make changes to the picture settings such as brightness, contrast, color temperature, etc.
4. Preview the changes on the screen and make further adjustments if necessary.
5. Once you are satisfied with the picture settings, press the Menu button again to exit the OSD menu.

Plug and Play

The LED-backlit display supports plug and play functionality, which means it can automatically detect and configure itself with your computer or other compatible devices. To use plug and play, simply connect the display to your device using the appropriate cable (VGA, HDMI, DVI) and power it on. The display will automatically adjust its settings to provide optimal performance.

FAQ

Q: What should I do if I encounter an error message?

If you encounter an error message on the LED-backlit display, refer to the “ERROR MESSAGE & POSSIBLE SOLUTION” section in the user manual (page 17) for troubleshooting steps and possible solutions.

Q: Where can I find additional technical support?

If you need additional technical support or have further questions about the LED-backlit display, refer to the “TECHNICAL SUPPORT (FAQ)” section in the user manual (page 16) or visit our website at https://manual-hub.com/ for further assistance.

LE-22, LE-24 & LE-27 LED-Backlit Display

www.agneovo.com

FOR YOUR SAFETY

Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference.

SAFETY PRECAUTIONS

FCC Class B Radio Frequency Interference Statement

WARNING: (FOR FCC CERTIFIED MODELS)
This device complies with Part 15 of the FCC rules.Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

NOTICE:

1. The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference.

WARNING:
To prevent fire or shock hazard, do not expose the monitor to rain or moisture. Dangerously high voltages are present inside the monitor. Do not open the cabinet. Refer servicing to qualified personnel only.

FOR YOUR SAFETY

PRECAUTIONS

• Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.

• Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the appliance. Use only
  a cart or stand recommended by the manufacturer or sold with the monitor.
  If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions.

• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of the monitor and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the monitor on a bed, sofa, rug, or similar surface. Do not place the monitor near or over a radiator or heat register. Do not place the monitor in a
  bookcase or cabinet unless proper ventilation is provided.

• The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

• The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug,
  have an electrician install the correct outlet, or ground the appliance safely.
  Do not defeat the safety purpose of the grounded plug.

• Unplug the unit during a lightening storm or when it will not be used for long period of time. This will protect the monitor from damage due to power surges.

• Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

• Never push any object into the slot on the monitor cabinet. It could short circuit parts causing a fire or electric shock. Never spill liquids on the monitor.

• Do not attempt to service the monitor by yourself; opening or removing
  covers can expose you to dangerous voltages and other hazards. Please
  refer all servicing to qualified service personnel.

• To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100 – 240V AC, Min. 5A.

• The wall socket shall be installed near the equipment and shall be easily accessible.

WEEE DECLARATION
Disposal of Waste Equipment by Users in Private Household in the European Union.

This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste.Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

SPECIAL NOTES ON LCD MONITOR
The following symptoms are normal with LCD monitor and do not indicate a problem.

NOTES

• You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
• The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or less such as a missing pixel or a pixel lit all of the time.
• Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when the same image is displayed for hours. In this case, the screen is recovered slowly by changing the image or turning off the Power Switch for hours.
• To declare the product is the Information Technical Equipment intended primarily for use in the domestic environment.
• The monitor is for computer use and not marketed and intended for displaying any television broadcast signals.

BEFORE YOU OPERATE THE MONITOR

FEATURES

• 54.69cm (21.5 inches) TFT Color LCD Monitor 59.94cm (23.6 inches) TFT Color LCD Monitor 68.6cm (27inches) TFT Color LCD Monitor
• Crisp, Clear Display for Windows
• Recommended Resolutions: 1920×1080@60Hz
• Ergonomic Design
• Space Saving, Compact Case Design

CHECKING THE CONTENTS OF THE PACKAGE

The product package should include the following items:

1. LCD Monitor
2. Owner’s Manual (including CD-ROM & Warranty Card)
3. Power Cord
4. D-Sub Cable
5. Audio Cable
6. Base

INSTALLATION INSTRUCTIONS

Install

BEFORE YOU OPERATE THE MONITOR

ADJUSTING THE VIEWING ANGLE
For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference.
Hold the stand so that the monitor does not topple when you change the monitor’s angle.
You are able to adjust the monitor as below:

Tilt angle：

Note：

• Put the monitor on a flat surface.
• Hold the panel so that the monitor does not topple.

Power Source:

1. Make sure that the power cord is the correct type required in your area.
2. This LCD monitor has an universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage area (No user adjustment is required.)
3. Connect the AC-power cord into your LCD monitor’s AC-power-input. The AC power cord may be connected to either a wall power outlet or the power outlet socket on your PC, depending on the type of power cord supplied with your LCD monitor.

CONNECTING CABLES

SIGNAL CABLE

• Connecting the Signal Cable: Plug the Signal Cable one end to LCD monitor’s “DSUB” socket, the other end to the computer’s VGA port and tighten the two screws on the cable connector.
• Connecting the DVI Cable: Plug the DVI Cable one end to LCD monitor’s “DVI” socket, the other end to the computer’s DVI port and tighten the two screws on the cable connector.
• Connecting the HDMI Cable: Plug the HDMI Cable one end to the output port of HDMI video equipment, the other end to LCD monitor’s “HDMI” socket.
• Connecting the Power Cord: Connect the AC-power cord into your LCD monitor’s “AC-IN”. The AC-power cord may be connected to either a wall power outlet or the power outlet socket on your PC, depending on the type of power cord supplied with your LCD monitor.
• Connecting the Audio Cable: Connect the audio cable between the monitor’s “AUDIO-IN” socket and the PC’s audio output (green port).

BEFORE YOU OPERATE THE MONITOR

1. AC-IN socket
2. HDMI input socket DVI input socket
3. D-SUB input socket
4. AUDIO-IN socket

GENERAL INSTRUCTIONS
Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences.

• The power cord should be connected.
• Connect the video cable from the monitor to the video card.
• Press the power button to turn on the monitor position. The power indicator will light up.

EXTERNAL CONTROLS

1. AUTO / SOURCE / EXIT
2. / ECO hotkey
3. + / Volume+
4. MENU / ENTER
5. Power Button
6. Power Indicator

OPERATING INSTRUCTIONS

FRONT PANEL CONTROL

• Auto/ Source / Exit:

  • When OSD menu is in active status, this button will act as EXIT-KEY (EXIT OSD menu).
  • When OSD menu is in off status, press this button to select input Source: D-Sub/DVI/HDMI.
  • When OSD menu is in off status, press this button for 2 seconds to activate the Auto Adjustment function. The Auto Adjustment function is used to set the HPos, VPos, Clock and Phase.

• – / ECO hotkey:
  ECO control is for brightness and image optimization for different applications. Activates ECO control when the OSD is off or adjust a function when function is activated.

• + / Volume+:
  Activates the volume control when the OSD is off or adjust a function when function is activated.

• MENU / ENTER:
  Activate OSD menu when OSD is OFF or activate/de-activate adjustment function when OSD is ON or Exit OSD menu when in Volume Adjust OSD status.

• / Power Button:
  Press this button to turn the monitor ON or OFF, and display the monitor’s state.

• Power Indicator:
  Blue — Power On mode.
  Orange — Standby mode.

• OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off and then press power button to turn the monitor on. To unlock the OSD – press and hold the MENU button while the monitor is off and then press
  power button to turn the monitor on.

NOTES

• Do not install the monitor in a location near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, or excessive dust or mechanical vibration or shock.
• Save the original shipping carton and packing materials, as they will come in handy if you ever have to ship your monitor.
• For maximum protection, repackage your monitor as it was originally packed at the factory.
• To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety precaution, always unplug the monitor before cleaning it.
• Do not scratch the screen with hard things, it may cause permanent damage.
• Don’t leak liquid into monitor which will result in the damage of component.

HOW TO ADJUST A SETTING

1. Press the MENU-button to activate the OSD window.
2. Press + or – to navigate through the functions. Once the desired function is highlighted, press the MENU-button to activate it. If the function selected has a sub-menu, press + or – again to navigate through the submenu functions. Once the desired function is highlighted, press MENU-button to activate it.
3. Press + or – to change the settings of the selected function.
4. To exit and save, select the exit function. If you want to adjust any other function, repeat steps 2-3.

ADJUSTING THE PICTURE
The descriptions for function control.

PLUG AND PLAY

Plug & Play DDC1/2B Feature

• This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities.
• The DDC2B is a bi-directional data channel based on the I2C protocol. The host can request EDID information over the DDC2B channel.
• THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY, THERE MUST BE A VIDEO INPUT SIGNAL.
• This monitor meets the Green monitor standards as set by the Video Electronics Standards Association (VESA) and The Swedish Confederation Employees (NUTEK). This feature is designed to conserve electrical energy by reducing power consumption when there is no video-input signal present. When there is no video input signal this monitor, following a time-out period, will automatically switch to an OFF mode. This reduces the monitor’s internal power supply consumption. After the video input signal is restored, full power is restored and the display is automatically redrawn. The appearance is similar to a “Screen Saver” feature except the display is completely off. The display is restored by pressing a key on the keyboard, or clicking the mouse.

TECHNICAL SUPPORT (FAQ)

•   Power Cord should be connected.

No Plug & Play| •   Check if the PC system is Plug & Play compatible.

•   Check if the Video Card is Plug & Play compatible.

•   Check if the D-15 plug pin of Video Cable is bent.

Picture is fuzzy.| •   Adjust the Contrast and Brightness Controls.
Picture bounces or a wave pattern is present in the picture.| •   Move electrical devices that may cause electrical interference.
The power LED is ON but there’s no video or no picture.| •   Computer Power Switch should be in the ON position.

•   Computer Video Card should be snugly seated in its slot

•   Make sure monitor’s video cable is properly connected to the computer.

•   Inspect monitor’s video cable and make sure none of the pins are bent.

•   Make sure computer is operational by hitting the CAPS LOCK key on the keyboard while observing the CAPS LOCK LED. The LED should either turn ON or OFF after hitting the CAPS LOCK key.

Missing one of the primary colors (RED, GREEN, or BLUE).| •   Inspect the monitor’s video cable and make sure that none of the pins are bent.
Screen image is not centered or sized properly.| •   Adjust pixel frequency (CLOCK) and PHASE or press hot-key (AUTO).
Picture has color defects (white does not look white)| •   Adjust RGB color or select color temperature.
Horizontal or vertical disturbances on the screen.| •   Use Win95/98/2000/ME/XP/WIN7/WIN8 shut-down mode Adjust CLOCK and PHASE or perform hot- key (AUTO-key).

CLOCK (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the picture has not correct width. PHASE adjusts the phase of the pixel clock signal. With a wrong phase adjustment the picture has horizontal disturbances in light picture. For PHASE and CLOCK adjustment use “dot- pattern” or
Win95/98/2000/ME/XP/WIN7/WIN8 shut-down mode pattern.

ERROR MESSAGE & POSSIBLE SOLUTION

CABLE NOT CONNECTED :

1. Check that the signal-cable is properly connected. If the connector is loose, tighten the connector’s screws.
2. Check the signal cable connection pins for damage.

INPUT NOT SUPPORT :
Your computer has been set to unsuitable display mode, set the computer to display mode given in the following table.(page 21~22)

APPENDIX

SPECIFICATIONS

LCD Panel

| ****

Panel Type

| LED-backlit TFT LCD
Panel Size| 21.5″| 23.6″| 27″
Pixel Pitch (mm)| 0.24825 x

0.24825

| 0.2715 x

0.2715

| 0.3114 x

0.3114

Max. Resolution| 1920 x 1080
Display Colour| 16.7M
Frequency (H/V)| H. Freq.| 30KHz – 83KHz
V. Freq.| 56Hz – 76Hz

Input

| VGA| 15-Pin D-Sub
DVI| 24-Pin DVI
HDMI| HDMI

Audio

| Audio in| 1 x stereo audio in for PC (audio jack, 3.5 Ø)
Speaker| 2W x 2

Power

| Power Supply| 100-240V~, 50/60Hz, 1.5A
Consumption Max.| < 40W (On)| < 50W (On)
Consumption Standby| < 0.5W
Specifications| LE- 22| LE- 24| LE- 27
---|---|---|---

Control Setting

| ****

Switch

| • +/Volume+

•  -/ECO

•  AUTO/SOURCE/EXIT

•  MENU/ENTER

•  POWER BUTTON

Functions

| •  Luminance

•  Image Setup

•  Color Temp.

•  Color Boost

•  Picture Boost

•  OSD Setup

•  Extra

Plug & Play|  | VESA DDC2B
Operating| Temperature| 0°C ~ 40°C (32°F ~ 104°F)
Conditions| Humidity| 10% ~ 85%
Storage| Temperature| -20°C ~ 60°C (-4°F ~ 140°F)
Conditions| Humidity| 5% ~ 90%

Weight

| Weight (with base)| 4.94 kg| 5.60 kg| 8.17 kg
Weight (w/o base)| 2.68 kg| 3.34 kg| 5.57 kg
Packaging Weight| 6.4 kg| 7.25 kg| 10.65 kg

Dimension

| ****

With Base

| 509.6 x 530.6

x 244.5 mm

| 571.4 x 554.7

x 244.5 mm

| 645.3 x 569.3

x 244.5 mm

Note: All specifications are subject to change without prior notice

FACTORY PRESET TIMING TABLE

Preset Display Modes

C| ****

Resolution

| Horizontal Frequency (KHz)| Vertical Frequency (Hz)
---|---|---|---

VGA

| 640×480 @60Hz| 31.469| 59.940
640×480 @67Hz| 35.000| 66.667
640×480 @72Hz| 37.861| 72.809
640×480 @75Hz| 37.500| 75.000
Dos-mode| 720×400 @70Hz| 31.469| 70.087

SVGA

| 800×600 @56Hz| 35.156| 56.250
800×600 @60Hz| 37.879| 60.317
800×600 @72Hz| 48.077| 72.188
800×600 @75Hz| 46.875| 75.000
Mac-Mode| 832×624 @75Hz| 49.725| 74.550

XGA

| 1024×768 @60Hz| 48.363| 60.004
1024×768 @70Hz| 56.476| 70.069
1024×768 @75Hz| 60.023| 75.029

SXGA

| 1280×1024@60Hz| 63.981| 60.020
1280×1024@75Hz| 79.976| 75.025

WSXGA

| 1440×900@60Hz| 55.935| 59.887
1440×900@75Hz| 70.600| 75.000

WSXGA+

| 1680×1050@60Hz| 64.674| 59.883
1680×1050@75Hz| 65.290| 59.950
FULL HD| 1920×1080@60Hz| 67.500| 60.000

Video （HDMI ） Timing Table

CONNECTOR PIN ASSIGNMENT

PRODUCT DIMENSIONS

LE-22

PRODUCT DIMENSIONS

LE-24

LE-27

Company Address: 5F-1, No. 3-1, Park Street, Nangang District, Taipei, 11503, Taiwan.

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>