Aluratek APB06F 18000 mAh Portable Battery Charger User Guide
- June 17, 2024
- Aluratek
Table of Contents
Aluratek APB06F 18000 mAh Portable Battery Charger
Product Information
Specifications
- Model : APB06F
- Battery Capacity : 18000 mAh
- USB Output 1 : 5V / 2.0A
- USB Output 2 : 5V / 1.0A
Product Highlights
- Power level indicators
- On-Off button
- LED flashlight
- Charge up to two devices at the same time*
*Original charging cable required
Operation
LED Flashlight
To turn the LED flashlight on or off, simply press the button once to power on the power bank and press it twice to turn the LED flashlight on or off.
Charging the Battery Pack
The battery is not fully charged when you receive it, so it is highly recommended to charge the APB06F before using it.
Note : Using APB06F out of the box will not harm the device, but it may result in reduced battery life as the unit will not be fully charged.
To charge the device, follow these steps:
- Connect the larger end of the included USB cable to your PC or a USB power adapter (not provided).
- Connect the Micro USB end of the cable to the APB06F.
- The Red LED will be on while charging, and one of the 4 Blue LEDs will flash depending on the capacity.
- Once the APB06F is fully charged, all 4 Blue LEDs will stay on and the Red LED will turn off.
Checking the Capacity
Press the Power button once to check the capacity of the battery pack. The LED status will indicate the capacity:
- 75% capacity : 3 Blue LEDs
- 50% capacity: 2 Blue LEDs
- 25% capacity : 1 Blue LED
- 0% capacity: All LEDs off
Charging Your Digital Device
Use the original cable that came with your device or a cable with a suitable connector. Follow these steps:
- Connect the USB tip of the cable to one of the USB Output ports on the battery pack.
- Charging will start automatically once the cable is connected.
- A Green LED will be on when your device is being charged.
Tech Support & Warranty Information
If you need further assistance, please contact the Aluratek support department for troubleshooting prior to returning thi device.
- E-mail : support@aluratek.com
- Web: www.aluratek.com/support
- Local (Irvine, CA): 714-586-8730
- Toll-free : 1-866-580-1978
- Aluratek warrants this product against defects in material or workmanship for 1 Year from the date of purchase.
- For more information, please visit: http://aluratek.com/warranty-return-policy
- You can register your product online at: http://aluratek.com/product-registration
Radio and TV Interference Statement
WARNING!!! This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FAQ
- Q: Can I charge two devices simultaneously?
- A: Yes, you can charge up to two devices at the same time using the USB Output ports on the battery pack. However, please note that you will need to use the original charging cable for each device.
- Q: Does the battery pack come fully charged?
- A: No, the battery pack is not fully charged when you receive it. It is recommended to charge the battery pack before using it to ensure optimal performance.
- Q: How do I know if the battery pack is fully charged? A: When the battery pack is fully charged, all 4 Blue LEDs will stay on and the Red LED will turn off.
- Q: How do I check the remaining capacity of the battery pack?
- A: Press the Power button once to check the capacity. The LED status will indicate the remaining capacity (e.g., 75% capacity with 3 Blue LEDs).
- Q: Can I use any USB cable to charge my device?
- A: It is recommended to use the original cable that came with your device or a cable with a suitable connector to ensure compatibility and optimal charging speed.
Product Highlights
Operation
- LED flashlight
To turn the LED flashlight on or off, simply press the button once to power on the power bank and press the twice to turn On / Off the LED flashlight.
Charging the battery pack
The battery is not fully charged and it is highly recommended that you charge APB06F before you begin using it.
Note : Using APB06F “out of the box” will not harm the device. You will experience reduced battery life as the unit will not be fully charged.
To charge the device, connect the larger end of the USB cable provided to your PC or a USB power adapter (not provided) and the Micro USB end to APB06F. The Red LED will be on while charging. In addition, one of the 4 Blue LEDs will be flashing depending on capacity. Once it is fully charged, the 4 Blue LEDs will stay on and the Red LED will turn off.
Checking the Capacity
Press the “Power” button once to check the capacity per below LED status.
Charging your digital device
Use the original cable that came with your device or a cable with a suitable connector. Connect the USB tip to one of the USB Output ports on the battery pack. Charging will start automatically once the cable is connected.A Green LED will be on when your device is been charged.
Tech Support & Warranty Information
If you need further assistance, please contact the Aluratek support department for troubleshooting prior to returning this device.
- E-mail : support@aluratek.com
- Web : www.aluratek.com/support
- Local (Irvine, CA): 714-586-8730
- Toll-free : 1-866-580-1978
Aluratek warrants this product against defects in material or workmanship for 1 Year from the date of purchase.
For more information, please visit: http://aluratek.com/warranty-return-
policy
You can register your product online at: http://aluratek.com/product-
registration
Radio and TV Interference Statement
WARNING!!! This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user i encouraged to try to correct the interference by whatever measures may be required to correct the interference.
Copyright © 2014 Aluratek, Inc.
All Rights Reserved.