ALPINE NVE-N055ZP Original Car Navigation System Instruction Manual

: June 17, 2024
: Alpine

Table of Contents

ALPINE NVE-N055ZP Original Car Navigation System
Product Information
User Agreement
Before Using The Disc
Viewing CD ROM information
Using New Functions
Buttons and functions of remote controls
Contact
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ALPINE-NVE-N055ZP-Original-Car-Navigation-System-
product

Product Information

Specifications

Product Name: SMART MAP PRO Prog. Ver. 3.50
Model Numbers: NVE-N055ZP, NVE-N055VP
Supported Systems: Alpine NVE-N055ZP, Alpine NVE-N055VP
Operating System: Prog. Ver. 3.10 or later versions

FAQ

Q: Can I use the new-version map disc with Prog. Ver. 3.10 or earlier versions?
- A: No, the new-version map disc is only compatible with Prog. Ver. 3.50 or later versions.
Q: Do I need to manually back up my settings with NVE-N055ZP and NVE-N055VP?
- A: No, the system automatically backs up your settings.
Q: Can I perform the second street searching function with the French CD ROM?
- A: No, the second street searching function is not available with the French CD ROM.
Q: Can I use Italian for guidance and menu displays with the Benelux map disc?
- A: No, Italian cannot be used for guidance and menu displays when using the Benelux map disc.

Please read before using this disc.

User Agreement

In using this CD-ROM “SMART MAP PRO” (hereinafter referred to as “Disk”), as part of the Aisin AW Co., Ltd. (“Aisin AW”) and Navigation Technologies Corporation (“Nav Tech”) Database (hereinafter referred to as “Database”), you are bound by the terms and conditions set forth below. By breaking the seal on this package, and using your copy of the Database and Disk, you have demonstrated your agreement to the terms and conditions of this Agreement. You should therefore, make sure that you read and understand the following provisions.

The Disk and Database may not be copied, duplicated, processed, or otherwise modified, in whole or in part, without the express written permission of Aisin AW, Nav Tech and Alpine Electronics, Inc. (“Alpine”).
Neither the Disk nor the Database may be transferred or sublicensed to any third party for profit, rent or loan, or licensed for reuse in any manners.
The Disk and/or Database may not be decompiled, reverse engineered or otherwise disassembled, in whole or in part.
The Disk and Database may not be used in a network or by any other manner of simultaneous use in multiple systems.
The Disk and Database are intended solely for personal use (or internal use where the end-user business), or the consumer. The Disk and Database are not to be used for commercial purposes.
Neither Aisin AW, Alpine nor Nav Tech guarantees to the customer that the functions included in the Disk and Database meet a specific objective of user.
Neither Aisin AW, Alpine nor Nav Tech shall be responsible for any damages caused by the use of the Disk and/or Database to the actual user and to any third party.
The Warranty on the Disk and Database shall not extend to an exchange or refund due to misspelling, omission of letters, or any other cosmetic discrepancy in layout found in Disk and/or Database.
The right to use the Disk and Database shall expire either when the user destroys this software, or when any of the terms for use is violated and Aisin AW, Alpine and/or Nav Tech exercises the option to revoke the license to use this software.
The terms and conditions hereof apply to all subsequent users and owners as well as to the actual purchaser.

WARNING

Operation of the system while driving is dangerous. Users should stop vehicle before operating the software.
Road conditions and regulations take precedence over information contained on the map display: observe actual traffic restrictions and circumstances while driving.
This software is designed for use exclusively in the NVE-N055ZP/NVE-N055VP series. It cannot and may not be used in conjunction with other hardware.

Before Using The Disc

Only for the users of SMART MAP PRO Prog.
Ver. 3.10 or later versions.

This Supplementary Owner’s Manual explains about the new version of the map disc. Please thoroughly read this Manual before starting the operation.

Operating-System Programme Rewriting

To use the new-version of the map disc:
- Just insert the new-version of the map disc into your navigation system NVE-N055ZP or NVE-N055VP. The system will automatically rewrite its operating-system programme and read the new-version of the map disc.
To use the earlier version of the map disc after using the new-version of the map disc:
1. Insert the earlier version of the map disc into the system.
2. Confirmation message appears on the display. Select “YES” by tilting the joystick and press the ENTER button.
3. The system will automatically rewrite the operating-system programme and read the earlier version of the map disc.

Only for the users of SMART MAP PRO Prog.
Ver. 3.10 or earlier versions.

The Owner’s Manual supplied with your Prog. Ver. 3.10 SMART MAP PRO disc is prepared to be used with Alpine NVE-N055PS. When this new-version map disc is used with Alpine NVEN055VP or NVE-N055ZP, some functions and menu displays differ. This addendum explains you these differences, so please be sure to read this addendum before operating.

Operating-System Programme Rewriting

To use the new version of the map disc (Prog. Ver. 3.50):
- Insert the new version of the map disc into your navigation system (NVE-N055VP or NVEN055ZP). The navigation system will automatically rewrite the operating system programme and read the new version of the map disc.
To use the earlier version of the map disc after using the new-version disc:
1. Insert the earlier version of the map disc.
2. Confirmation message appears on the display. Select “YES” by tilting the joystick and pressing the ENTER button.
3. The navigation system will rewrite the operating-system programme to read the earlier version of the map disc.

Unusable functions

Manual backup.
- With NVE-N055ZP and NVE-N055VP, the system backs up (saves) your own settings automatically. Therefore, you do not need to manually back up your settings.
The second street searching function cannot be performed using the French CD ROM (NVSCF05).

An outline of key differences in functions and menu displays between the earlier version and new version discs

Dutch can be used for guidance and menu displays (only when the new-version map disc for the Benelux area (NVS-CX05) is used).
- Note: When the map disc for the Benelux area is used, Italian cannot be used for guidance and menu displays.
Destination searching menu is divided into “Category” and “Address.”
Point of interest searching menu is divided into “Category” and “Address.”
“All Categories” menu is added for the searching from the category.
- When “All Categories” menu is selected, your destination can be directly searched by selecting the desired category from the list displayed.
“Search All Cities” menu is added for the searching from the address.
- When “Search All Cities” menu is selected, your destination can be directly searched from the street address.
The address number inputting menu is added to the searching procedure from address.
- Your desired location can be searched for more precisely by inputting the address number after selecting the city/street names.
- See this Owner’s Manual for operating methods.
Searching from the recently-traveled destinations.
- You can select your destination from 5 previous destinations including the current destination.
Automatic searching for a cross-boarder point.
- When your destination located in the covering area of another map disc is searched, the navigation system will automatically search for the cross-boarder point as well.
Today’s Plan function.
- The travel order for your multiple destinations and waypoints can be changed as you like.
Viewing CD ROM information.
- You can look at the information about the CD ROM.

The functions that can be used in the same manner as for the earlier version of map disc are:

The function for controlling music discs.
The remote control (RUE-4105) operation.

Note: See this Owner’s Manual for remote controls that can be used.

There are some other minor changes in the menu displays on the new-version disc, please refer to the supplied Owner’s Manual if necessary.

Viewing CD ROM information

You can look at the information about the CD ROM.

Press the MENU button to display the main menu. Select “Inform” from the main menu, then select “CD-ROM INFO” from the submenu and press ENTER.
The CD ROM information is displayed.
- a. PROGRAM VERSION
1. Shows the Map CD ROM Version in use.
- b. AREA
- Shows the map area contained in the CD ROM in use.
Press the POS. button
- The display returns to the map screen showing the present vehicle position.

Using New Functions

How to input the address number in the searching for destination from address (name of city/street) procedure
(Easy mode)

ALPINE-NVE-N055ZP-Original-Car-Navigation-System-fig-3

Select the desired street name by following steps 1 to 8.
The Detailed Information screen appears. Select “address number” from the menu and press ENTER.
The address number inputting pallet is displayed. Select the numerals for the address number and press ENTER.
- Note: In the searchable range, there may be some address numbers that are not searchable.
When the desired address number has been input, select “OK” and press ENTER.
The system starts to calculate the route. When the calculation has been completed, the system automatically displays the present vehicle position screen.

How to input the address number in the searching for point of interest from address procedure
(Expert mode)

ALPINE-NVE-N055ZP-Original-Car-Navigation-System-fig-6

Select the desired street name by following steps 1 to 3.
The Detailed Information screen appears. Select “address number” from the menu and press ENTER.
The address number inputting pallet is displayed. Select the numerals for the address number and press ENTER.
- Note: In the searchable range, there may be some address numbers that are not searchable.
When the desired address number has been input, select “OK” and press ENTER.
The “Point may be set on map” menu with the map showing the area of the point of interest appears. Select the desired menu item and press ENTER to set the point as a destination, waypoint, etc.