aspire Gusto Mini Closed Tank System Starter Kit User Guide

: June 17, 2024
: aspire

Table of Contents

Specifications
Product Usage Instructions
Liquid POD Activation and Installation
FAQ
PRODUCT OVERVIEW
Kit Contents
Gusto mini Tank (Replaceable POD) **
Protection Features
Charging Gusto Mini
Installing POD to Device
ABOUT COMPANY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

aspire Gusto Mini Closed Tank System Starter Kit

Specifications

Output Wattage : 17 Watt
Atomizer Resistance : 1.5ohm
Continuous Fire Time : 10 seconds with Auto Shut Off
Charging Port : Micro-USB
Dimensions : 22mm X 47.5mm X 60mm
Battery : 900mah LiPo Battery

Product Usage Instructions

Charging Gusto Mini
Charging is done through the Micro-USB charging port. Connect the Gusto Mini to your charger using the included USB cable. The indicator light will flash green and red three times, then turn red to indicate charging. Once the charge reaches 4.2V, the light will turn green to show that it is fully charged.

Liquid POD Activation and Installation

Activating the POD

Grab the two silicon tabs on the POD and gently pull them down away from the POD until the tabs snap off. This activates the tank.
Flick the POD once or twice in a downward motion to speed up the saturation of the atomizer. Ensure that the bottom chamber of the POD is filled with liquid. Let it sit for 2 minutes before use.

Installing the POD to the Device

To access the POD chamber, slide the cover off of the device.
Gently slide the POD into the capture points, making sure the atomizer is at the bottom. Push it in until the POD is securely in place.
Slide the aluminum cover back on, and the Gusto Mini is now ready to use.
After installation, ensure that the device is ready to use. Fire the device with a few quick puffs to make sure the atomizer has been saturated with liquid. Once you taste the liquid vapor, continue to use the device as normal and enjoy the full flavor of the Gusto Mini.

FAQ

Where can I find more information about the product and how to use it?
You can visit the official website at www.aspirecig.com for more information about your product and detailed usage instructions.
Who is the manufacturer of the Gusto Mini?
The Gusto Mini is manufactured by Shenzhen Eigate Technology Co., Ltd. The company is located at Building 3, Xinhongtai Industrial Park, 14 Jian’an Rd, Tangwei, Fuyong Town, Bao’an District, Shenzhen, China. You can contact them at Tel: +86-755-81499783 or email: service@aspirecig.com.
Where is the Gusto Mini made?
The Gusto Mini is made in China by Eigate.

PRODUCT OVERVIEW

aspire-Gusto-Mini-Closed-Tank-System-Starter-Kit-fig-5

Kit Contents

Gusto Mini Device
Replaceable Liquid POD
510 Delrin Drip Tip
Micro-USB cable
User Manual Warranty Card

Gusto mini Tank (Replaceable POD) **

**

POD Capacity: 2ml
1.5Ω Atomizer
Organic Cotton Wick
MID-AIRFLOW

Protection Features

10 Second Auto Cut-Off
Short Circuit Protection
Over Discharge Protection
Over Heat Protection

Gusto mini Specifications

Output Wattage: 17 Watt
Atomizer Resistance: 1.5ohm
Continuous Fire Time: 10 seconds with Auto Shut Off
Charging Port: Micro-USB
Dimensions: 22mm X 47.5mm X 60mm
Battery: 900mah LiPo Battery

Instructions

Press the fire button 5 times rapidly to power the Gusto Mini On or Off, the indicator light will then flash both green and red 3 times to indicate on or off.
Continuous fire time is 10 seconds; after 10 seconds of firing the indicator light will flash green or red 10 times to Indicate Shut Off. Notice the LED color; it also indicates current Charge Level. (Green = Charged / Red = Battery Low)
When the charge level is above 3.5V the indicator light will be green, if charge level drops below 3.5V, the light will be red.
When Red light flashes during use, it’s time to recharge.

Charging Gusto Mini

Charging is via Micro-USB charging port. Maximum charging current can reach up to 900mA.
Connect the Gusto Mini to your charger (USB cable included), the indicator light will flash green and red 3 times, then turn red to indicate charging. When the charge reaches 4.2V the light will turn green to show it’s fully charged.

Liquid POD Activation and Installation

To Activate POD, grab the two silicon tabs and gently pull down away from the POD until the the two tabs snap off-the tank is now activated
Take the POD and flick once or twice in a downward motion to speed up the saturation to the atomizer. Once the bottom chamber is filled with liquid, let set for 2 minutes before use.

Installing POD to Device

To access the POD chamber, slide the cover off of the device.
Gently slide the POD into the capture points, making sure the atomizer is on the bottom. Push in until the POD is securely in place. Slide the aluminum cover back on and the Gusto Mini is ready to use.
After installation, and the device is ready to use, fire the device with a few quick puffs to make sure the atomizer has been saturated with liquid. Once you get a taste of the liquid vapor, continue to use as normal, enjoying the full flavor of the Gusto Mini—Enjoy! 1 2

To learn more about your products and how to use, please visit: www.aspirecig.com.