allsee L55HD9 Freestanding Android Digital Poster Installation Guide
- June 3, 2024
- allsee
Table of Contents
allsee L55HD9 Freestanding Android Digital Poster
Pre-Setup
Please read entire instruction sheet before you start.
Tools: 1 x Allen Wrench
Accessories: 14 Washers 14 Bolts
Instructions
Step 1
Start by removing the screen from the packaging and carefully placing it on a
flat soft surface with the LCD panel facing upwards. You will need 2 people to
lift this on both ends. You can also use the foam included with the package to
make a soft surface.
Step 2
Remove the base from the packaging and familiarise yourself with the direction
the base needs to be placed onto the screen. You can also see from the images
below the 14 holes needed to connect the base and screen together with the
supplied bolts.
Step 3
Place the supplied washers on to the bolts.
Step 4
Fit the base onto the bottom of the screen whilst aligning the holes as show
in Step 2.
Step 5
Begin screwing the bolts clockwise into each of the holes using an Allen
Wrench to secure the two pieces together.
Step 6
Carefully stand the unit up with another person and wheel is to the desired
location.
When connecting the Power cable to a socket, unlock the back panel and place
the Power cable through the small gap at the bottom of the unit.
Please note: You can disable the integrated castor wheels by unscrewing the
four feet, as shown below.
