Jiumao M98 Android TV Box User Manual
- June 17, 2024
- Jiumao
Table of Contents
User Manual
Android tv box
Android TV BOX User Manual
Getting Started
1.1 Basic Operations
1.1.1 Power On/ Off and Sleep
- Connect the box to the TV with HDMI cable, connect box to the power adaptor, Connect mouse, air mouse or other input devices with USB port
- After the device and cable connected ,power led turn to blue .
- After the device and cable disconnected, Power LED turns off
- Under power on mode, press remote control’s power button, device is entering into sleep mode.
- Under sleep mode, device will be wake when you press remote control’s power button,
1.1.2 Open applications
Use remote control’s arrow keys to choose the wanted program, click OK button
to open the selected program
1.1.3 Switch in the applications
Click “My Apps” to view recently used programs, click program icon to switch
application arbitrarily
1.1.4 Close Applications
Click icon to view recently used programs, choose one of them by click and
hold, drag it to blank area to close the application
- This function only operated in the condition of Mouse mode
1.1.5 Back To Home Screen
Click icon to return to home screen
Click icon on remote control to return to home screen
1.1.6 Read External Storage Data
Read U Disk
Insert U flash disk or removable hard disk into USB port in the status of
power on, icon appears in top left corner of the desktop, open “FileBrowser”,
the identified USB(A:) will appear under “Local Disk”, U disk’s operation is
available now
Read TF
card
Insert TF card into the device in the status of power on, when icon appears in
top left corner of the desktop, open “FileBrowser”, the identified External
Storage Card will appear under “Local Disk”, TF card’s operation is available
now 1.1.7 WIFI Function
Home Screen ➔S ETTI NGS➔Network➔Select “Wi-Fi ” to open WIFI function
Choose hotspot➔ Input Password➔ Connect to the network
1.1.8 Ethernet Function
Home Screen ➔ SETTINGS ➔ Network ➔ Select “Ethemet” to open Ethernet function
Insert network cable, network will be connected automatically
1.1.9 WLAN
Hotspot
Operations on the box :
Home Screen ➔ SETTINGS ➔Other ➔ More
Setting ➔ More… Portable hotspot➔ Select “Portable Wi-Fi hotspot”
Select “Set up
Wi-Fi hotspot” to set up “Network SSID ” “Security”. “Password” parameters
* Ensure
connected to the wired network, the box can be used as wireless AP to support
more wireless devices access in the family
2.1.0 The Step that how to reflash the box
- Uncompress the downloaded firmware (ROM) to the root of and SD card(format your SD card first).
- Insert the SD Card into powered-off Box (power cable not plugged in) with no external USB storage attached.
- Using a toothpick, insert into the AV port of Box, press and hold the hidden button while plugging power in.Do not release until you see the screen of Robert Logo.
- Update will run automatically. When it is done then choose “Reboot”. You can disregard any errors that display after the update, , they are not relevant to your device.
- When system has rebooted then you should first check to ensure wifi is working by going to Settings->Wi-Fi. Tum on the wifi if it’s off —and you should be able ta connect
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not
be co-located or operating in conjunction with any other antenna or
transmitter.
End-users and installers must be provide with antenna installation
instructions and transmitter operating conditions for satisfying RF exposure
com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>